FreeCalypso > hg > fc-magnetite
view cdg-hybrid/msg/rr_short_pd.mdf @ 685:3fb7384e820d
tpudrv12.h: FCDEV3B goes back to being itself
A while back we had the idea of a FreeCalypso modem family whereby our
current fcdev3b target would some day morph into fcmodem, with multiple
FC modem family products, potentially either triband or quadband, being
firmware-compatible with each other and with our original FCDEV3B. But
in light of the discovery of Tango modules that earlier idea is now being
withdrawn: instead the already existing Tango hw is being adopted into
our FreeCalypso family.
Tango cannot be firmware-compatible with triband OM/FCDEV3B targets
because the original quadband RFFE on Tango modules is wired in TI's
original Leonardo arrangement. Because this Leonardo/Tango way is now
becoming the official FreeCalypso way of driving quadband RFFEs thanks
to the adoption of Tango into our FC family, our earlier idea of
extending FIC's triband RFFE control signals with TSPACT5 no longer makes
much sense - we will probably never produce any new hardware with that
once-proposed arrangement. Therefore, that triband-or-quadband FCFAM
provision is being removed from the code base, and FCDEV3B goes back to
being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control
purposes.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 24 Sep 2020 21:03:08 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : rr_short_pd.mdf ;*** Creation : Thu Jun 19 15:32:12 CST 2008 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Air Interface Message Specification ;*** Document Name : rr_short_pd ;*** Document No. : 8010.602.03.001 ;*** Document Date : 2003-11-06 ;*** Document Status: BEING_PROCESSED ;*** Document Author: LG ;******************************************************************************** PRAGMA SRC_FILE_TIME "Wed Nov 28 10:21:00 2007" PRAGMA LAST_MODIFIED "2003-11-06" PRAGMA ID_AND_VERSION "8010.602.03.001" PRAGMA CCDNAME RR_SHORT ; CCD name tag PRAGMA ALLWAYS_ENUM_IN_VAL_FILE NO ; Adds enumerations in the .val file. CONST L3MAX_ACK 251 ; GSM 4.06, section 5.8.5 CONST L3MAX 251 ; CONST MAX_NNC 96 ; Maximum number of cells in Neighbour cell list for Enhanced Measurements CONST MAX_BSICI 8 ; Maximum invalid BSIC information IE's (21*8-14) / (17+1) = 8 CONST MAX_2GEXT 132 ; Maximum length of MI 2G Extension (21*8-36) = 132 VALTAB VAL_bsic_seen VAL 0 NO_INV_BSIC_SEEN "No cell with invalid BSIC and allowed NCC part of BSIC is seen." VAL 1 INV_BSIC_SEEN "One cell or more with invalid BSIC and allowed NCC part of BSIC is seen." VALTAB VAL_cv_bep VAL 0 CV_BEP_0 "2.00 > std(BEP)/mean(BEP) > 1.75" VAL 1 CV_BEP_1 "1.75 > std(BEP)/mean(BEP) > 1.50" VAL 2 CV_BEP_2 "1.50 > std(BEP)/mean(BEP) > 1.25" VAL 3 CV_BEP_3 "1.25 > std(BEP)/mean(BEP) > 1.00" VAL 4 CV_BEP_4 "1.00 > std(BEP)/mean(BEP) > 0.75" VAL 5 CV_BEP_5 "0.75 > std(BEP)/mean(BEP) > 0.50" VAL 6 CV_BEP_6 "0.50 > std(BEP)/mean(BEP) > 0.25" VAL 7 CV_BEP_7 "0.25 > std(BEP)/mean(BEP) > 0.00" VALTAB VAL_dtx_used VAL 0 DTX_USED_NO "DTX was not used" VAL 1 DTX_USED_YES "DTX was used" VALTAB VAL_inv_bsic_rep VAL 0 NO_REPORT "Indicates that GSM cells with invalid BSIC and allowed NCC part should not be reported" VAL 1 YES_REPORT "Indicates that GSM cells with invalid BSIC and allowed NCC part should be reported" VALTAB VAL_pow_ctrl VAL 0 POW_CTRL_NO "PWRC is not set" VAL 1 POW_CTRL_YES "PWRC is set" VALTAB VAL_rep_rate VAL 0 NORMAL_RATE "SACCH rate reporting." VAL 1 REDUCED_RATE "Reduced reporting rate allowed." VALTAB VAL_report_type VAL 0 RT_EMR "MS shall use the Enhanced Measurement Report message, if at least one BSIC is allocated to each BA frequency, otherwise the Measurement Report message." VAL 1 RT_MR "The MS shall use the Measurement Report message for reporting." VALTAB VAL_scale VAL 0 SCALE_ZERO_DB "0 dB offset is used for the reported RXLEV values" VAL 1 SCALE_TEN_DB "+10 dB offset is used for the reported RXLEV values" VALTAB VAL_scale_ord VAL 0 SC_ORD_ZERO_DB "0 dB offset, which shall be used for the reported RXLEV values" VAL 1 SC_ORD_TEN_DB "+10 dB offset, which shall be used for the reported RXLEV values" VAL 2 SC_ORD_AUTOMATIC "automatic offset, which shall be used for the reported RXLEV values" VALTAB VAL_sl2h VAL DEF "reserved" VAL 0 SL2H_0 "Short Layer 2 header: UI command frame" VAR ba_start_bsic "BA Index Start BSIC" 5 VAR ba_ind "BA Sequence Number indication" 1 VAR ba_ind_3g "3G BA Sequence Number indication" 1 VAR bsic "BSIC" 6 VAR bsic_seen "BSIC Seen" 1 VAL @m_rr_short_pd - VAL_bsic_seen@ VAR cv_bep "Coefficient of Variation of BEP" 3 VAL @m_rr_short_pd - VAL_cv_bep@ VAR dtx_used "DTX USED" 1 VAL @m_rr_short_pd - VAL_dtx_used@ VAR extens "Extension" 1 VAR e_len "Extension Length" 8 VAR inv_bsic_rep "Invalid BSIC reporting" 1 VAL @m_rr_short_pd - VAL_inv_bsic_rep@ VAR mean_bep "Mean BEP" 5 VAR mp_cm "Measurement parameters change mark" 1 VAR msg_type "Message Type" 6 VAR mi_idx "MI Index" 4 VAR mi_c "MI Counter" 4 VAR mr "Multiband Reporting" 2 VAR nr_rcvd_bl "Number Of Received Blocks" 5 VAR pow_ctrl "Power Control Indicator" 1 VAL @m_rr_short_pd - VAL_pow_ctrl@ VAR rep_rate "Reporting Rate" 1 VAL @m_rr_short_pd - VAL_rep_rate@ VAR report_type "Report Type" 1 VAL @m_rr_short_pd - VAL_report_type@ VAR rxlev "RX Level" 6 VAR rep_q "Reporting Quantity" 6 VAR rxqual_full "RX Quality Full Serving Cell" 3 VAR scale "Scale" 1 VAL @m_rr_short_pd - VAL_scale@ VAR scale_ord "Scale ord" 2 VAL @m_rr_short_pd - VAL_scale_ord@ VAR serv_band_rep "Serving band reporting" 2 VAR sl2h "Short Layer 2 Header" 2 VAL @m_rr_short_pd - VAL_sl2h@ COMP emp "EM MEASUREMENT Parameters Description" { CSN1_S1 mr ; Multiband Reporting CSN1_S1 serv_band_rep ; Serving band reporting scale_ord ; Scale ord CSN1_S1 EXTERN @m_rr_com - report_900@ report_900 ; Reporting 900 CSN1_S1 EXTERN @m_rr_com - report_1800@ report_1800 ; Reporting 1800 CSN1_S1 EXTERN @m_rr_com - report_400@ report_400 ; Reporting 400 CSN1_S1 EXTERN @m_rr_com - report_1900@ report_1900 ; Reporting 1900 CSN1_S1 EXTERN @m_rr_com - report_850@ report_850 ; Reporting 850 } COMP i_bsic_i "Invalid BSIC Information" { ba_start_bsic ; BA List Index bsic ; BSIC rxlev ; GSM Reporting Quantity } COMP mi_ext "MI 2G Extension" { e_len ; Extension Length extens [e_len..MAX_2GEXT] ; Extension } COMP scdata "Serving Cell Data" { dtx_used ; DTX Used rxlev ; RX Level rxqual_full ; RX Quality Full mean_bep ; Mean BEP cv_bep ; Coefficient of Variation of BEP nr_rcvd_bl ; Number Of Received Blocks } COMP rep_q_arr "Structured Element" { CSN1_S1 rep_q ; reported quantity, present only if reported } COMP em_rep "EM Bitmap Type Reporting" { rep_q_arr [0..MAX_NNC] ; Reporting Quantities } MSG u_emr uplink 0b000100 ; Enhanced Measurement Report { GSM3_V msg_type ; Message Type GSM3_V sl2h ; Short Layer 2 Header GSM3_V ba_ind ; BA Sequence Number indication GSM3_V ba_ind_3g ; 3G BA Sequence Number indication GSM3_V bsic_seen ; BSIC Seen GSM3_V scale ; Scale CSN1_S1 scdata ; Serving Cell Data CSN1_S1 i_bsic_i [0..MAX_BSICI] ; Invalid BSIC Information CSN1_S1 em_rep ; EM Bitmap Type Reporting S_PADDING .00101011 (21) ; Spare Padding } MSG d_meas_inf downlink 0b000101 ; Measurement Information { GSM3_V msg_type ; Message Type GSM3_V sl2h ; Short Layer 2 Header GSM3_V ba_ind ; BA Sequence Number indication GSM3_V ba_ind_3g ; 3G BA Sequence Number indication GSM3_V mp_cm ; Measurement parameters change mark GSM3_V mi_idx ; MI Index GSM3_V mi_c ; MI Counter GSM3_V pow_ctrl ; Power Control Indicator GSM3_V report_type ; Report Type GSM3_V rep_rate ; Reporting Rate GSM3_V inv_bsic_rep ; Invalid BSIC Reporting CSN1_S1 EXTERN @m_rr_com - rtdd@ rtdd ; GPRS Real Time Difference Description CSN1_S1 EXTERN @m_rr_com - gprs_bsic@ gprs_bsic ; GPRS BSIC Description CSN1_S1 EXTERN @m_rr_com - gprs_rep_prio@ gprs_rep_prio ; Report Priority CSN1_S1 emp ; EM Measurement Parameters Description CSN1_S1 mi_ext ; MI 2G Extension S_PADDING .00101011 (21) ; Spare Padding }