FreeCalypso > hg > fc-magnetite
view cdg3/cdginc-conservative/p_l2r.val @ 685:3fb7384e820d
tpudrv12.h: FCDEV3B goes back to being itself
A while back we had the idea of a FreeCalypso modem family whereby our
current fcdev3b target would some day morph into fcmodem, with multiple
FC modem family products, potentially either triband or quadband, being
firmware-compatible with each other and with our original FCDEV3B. But
in light of the discovery of Tango modules that earlier idea is now being
withdrawn: instead the already existing Tango hw is being adopted into
our FreeCalypso family.
Tango cannot be firmware-compatible with triband OM/FCDEV3B targets
because the original quadband RFFE on Tango modules is wired in TI's
original Leonardo arrangement. Because this Leonardo/Tango way is now
becoming the official FreeCalypso way of driving quadband RFFEs thanks
to the adoption of Tango into our FC family, our earlier idea of
extending FIC's triband RFFE control signals with TSPACT5 no longer makes
much sense - we will probably never produce any new hardware with that
once-proposed arrangement. Therefore, that triband-or-quadband FCFAM
provision is being removed from the code base, and FCDEV3B goes back to
being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control
purposes.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 24 Sep 2020 21:03:08 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_l2r.val | | SOURCE : "sap\l2r.pdf" | | LastModified : "2001-10-31" | | IdAndVersion : "8411.102.01.124" | | SrcFileTime : "Thu Nov 29 09:44:22 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:52:55 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_L2R_VAL #define P_L2R_VAL #define CDG_ENTER__P_L2R_VAL #define CDG_ENTER__FILENAME _P_L2R_VAL #define CDG_ENTER__P_L2R_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_L2R_VAL__LAST_MODIFIED _2001_10_31 #define CDG_ENTER__P_L2R_VAL__ID_AND_VERSION _8411_102_01_124 #define CDG_ENTER__P_L2R_VAL__SRC_FILE_TIME _Thu_Nov_29_09_44_22_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_L2R_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_pt */ #define L2R_COMPR_TYPE_V42BIS (0x0) /* V.42bis */ /* * Value constants for VAL_p0 */ #define L2R_COMP_DIR_NONE (0x0) /* compress in neither direction */ #define L2R_COMP_DIR_TRANSMIT (0x1) /* compress in uplink direction only */ #define L2R_COMP_DIR_RECEIVE (0x2) /* compress in downlink direction only */ #define L2R_COMP_DIR_BOTH (0x3) /* compress in both directions */ /* * Value constants for VAL_uil2p */ #define L2R_ISO6429 (0x0) /* ISO6429, codeset 0, DC1/DC3 (with flow control) */ #define L2R_COPnoFlCt (0x1) /* Character Oriented Protocol with No Flow Control */ /* * Value constants for VAL_rate */ #define L2R_HALFRATE_4800 (0x0) /* halfrate 4,8/6 kBit */ #define L2R_FULLRATE_4800 (0x1) /* fullrate 4,8/6 kBit */ #define L2R_FULLRATE_9600 (0x2) /* fullrate 9,6/12 kBit */ #define L2R_FULLRATE_14400 (0x3) /* fullrate 13,4/14,4 kBit */ /* * Value constants for VAL_ack_flg */ #define L2R_ACK (0x0) /* acknowledged */ #define L2R_NAK (0x1) /* not acknowledged */ /* * Value constants for VAL_cause */ #define CAUSE_DUMMY (0x0) /* The following causes can occur within this primitive: all those possible within the RLP_ERROR_IND primitive of the RLP SAP */ /* * Value constants for VAL_dti_conn */ #define L2R_CONNECT_DTI (0x0) /* Connect DTI to L2R */ #define L2R_DISCONNECT_DTI (0x1) /* Connect DTI to upper layer */ /* * Value constants for VAL_link_id */ #define L2R_LINK_ID_DEFAULT (0x0) /* Default link id */ /* * Value constants for VAL_dti_direction */ #define L2R_DTI_NORMAL (0x0) /* DTI used normally */ #define L2R_DTI_INVERTED (0x1) /* DTI is inverted */ /* * user defined constants */ #define L2R_K_MS_IWF_MIN (0x0) #define L2R_K_MS_IWF_MAX (0x3d) #define L2R_K_MS_IWF_DEF (0x3d) #define L2R_K_IWF_MS_MIN (0x0) #define L2R_K_IWF_MS_MAX (0x3d) #define L2R_K_IWF_MS_DEF (0x3d) #define L2R_T1_MIN_FULLRATE_14400 (0x2a) #define L2R_T1_MIN_FULLRATE_9600 (0x26) #define L2R_T1_MIN_FULLRATE_4800 (0x2c) #define L2R_T1_MIN_HALFRATE_4800 (0x3c) #define L2R_T1_MIN (0x26) #define L2R_T1_MAX (0xff) #define L2R_T1_DEF_FULLRATE_14400 (0x34) #define L2R_T1_DEF_FULLRATE_9600 (0x30) #define L2R_T1_DEF_FULLRATE_4800 (0x36) #define L2R_T1_DEF_HALFRATE_4800 (0x4e) #define L2R_T1_DEF (0x30) #define L2R_T2_MIN (0x0) #define L2R_T2_MAX (0xff) #define L2R_T2_DEF (0x14) #define L2R_N2_MIN (0x1) #define L2R_N2_MAX (0xff) #define L2R_N2_DEF (0x6) #define L2R_PT_MIN (0x0) #define L2R_PT_MAX (0x0) #define L2R_PT_DEF (0x0) #define L2R_P0_MIN (0x0) #define L2R_P0_MAX (0x0) #define L2R_P0_DEF (0x0) #define L2R_P1_MIN (0x200) #define L2R_P1_MAX (0xffff) #define L2R_P1_DEF (0x200) #define L2R_P2_MIN (0x6) #define L2R_P2_MAX (0xfa) #define L2R_P2_DEF (0x6) #define L2R_BYTES_PER_PRIM_MIN (0x19) #define L2R_BYTES_PER_PRIM_MAX (0xfa) #define L2R_BYTES_PER_PRIM_DEF (0xfa) #define L2R_BUFFER_SIZE_MIN (0x800) #define L2R_BUFFER_SIZE_MAX (0x1000) #define L2R_BUFFER_SIZE_DEF (0x800) #define L2R_ENTITY_NAME_LEN (0x6) #include "CDG_LEAVE.h" #endif