FreeCalypso > hg > fc-magnetite
view cdg3/msg/sat.mdf @ 685:3fb7384e820d
tpudrv12.h: FCDEV3B goes back to being itself
A while back we had the idea of a FreeCalypso modem family whereby our
current fcdev3b target would some day morph into fcmodem, with multiple
FC modem family products, potentially either triband or quadband, being
firmware-compatible with each other and with our original FCDEV3B. But
in light of the discovery of Tango modules that earlier idea is now being
withdrawn: instead the already existing Tango hw is being adopted into
our FreeCalypso family.
Tango cannot be firmware-compatible with triband OM/FCDEV3B targets
because the original quadband RFFE on Tango modules is wired in TI's
original Leonardo arrangement. Because this Leonardo/Tango way is now
becoming the official FreeCalypso way of driving quadband RFFEs thanks
to the adoption of Tango into our FC family, our earlier idea of
extending FIC's triband RFFE control signals with TSPACT5 no longer makes
much sense - we will probably never produce any new hardware with that
once-proposed arrangement. Therefore, that triband-or-quadband FCFAM
provision is being removed from the code base, and FCDEV3B goes back to
being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control
purposes.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 24 Sep 2020 21:03:08 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : sat.mdf ;*** Creation : Thu Jun 19 15:32:13 CST 2008 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Air Interface Message Specification ;*** Document Name : sat ;*** Document No. : 6147.609.99.011 ;*** Document Date : 2003-02-25 ;*** Document Status: BEING_PROCESSED ;*** Document Author: SBK ;******************************************************************************** PRAGMA SRC_FILE_TIME "Wed Nov 28 10:21:04 2007" PRAGMA LAST_MODIFIED "2003-02-25" PRAGMA ID_AND_VERSION "6147.609.99.011" CONST MAX_PARTY_NUM_SAT 480 ; Maximum number length of a cld/clg party CONST MAX_SUBADDR_NUM 20 ; Maximum number length of a cld/clg party subaddress CONST MAX_CH_DATA_LEN 241 ; Maximum length of channel data string CONST MAX_CMD_AT_LEN 241 ; Maximum length of an AT command string CONST MAX_ALPHA_ID_LEN 241 ; Maximum bytelength of alpha identifier CONST MAX_SS_STRING_LEN 60 ; Maximum length of SS string CONST MAX_SAT_USSD_LEN 160 ; Maximum length of USSD string CONST MAX_SMS_DIGIT_LEN 20 ; Maximum number of digits in SMS addresses CONST MAX_SMS_TPDU_LEN 184 ; Maximum length of SMS SUBMIT or COMMAND CONST MAX_CAP_CNF_LEN 112 ; Maximum bitlength of capability configuration CONST MAX_TEXT_LEN 160 ; Maximum length of text (response to Send USSD) CONST MAX_EVENT_LIST_LEN 10 ; Maximum number of supported events CONST MAX_TI_LEN 16 ; Maximum number of different transaction identifier CONST MAX_DTMF_LEN 80 ; Maximum number of DTMF digits CONST MAX_PROV_F_PATH_LEN 16 ; Maximum number of supported paths CONST MAX_BEARER_LIST_LEN 253 ; Maximum list length of supported bearer CONST MAX_CAUSE_LEN 30 ; Maximum length of cause information element CONST CCR_ALLW_NO_MDFY 0x00 ; Allowed, no modification CONST CCR_NOT_ALLW 0x01 ; Not allowed CONST CCR_ALLW_WITH_MDFY 0x02 ; Allowed, with modification CONST MAX_SAT_APN_LEN 102 ; Maximum byte length of APN string CONST MAX_URL_LEN 253 ; Maximum length for URL CONST MAX_PFP_ELEM 10 ; Maximum provisioning file path elements VALTAB VAL_cmd_typ VAL 0x01 SAT_CMD_REFRESH "Refresh command" VAL 0x02 SAT_CMD_MORE_TIME "More time command" VAL 0x03 SAT_CMD_POLL_INTERVAL "Poll interval command" VAL 0x04 SAT_CMD_POLL_OFF "Polling off command" VAL 0x05 SAT_CMD_EVENT_LIST "Setup event list command" VAL 0x10 SAT_CMD_SETUP_CALL "Set up call command" VAL 0x11 SAT_CMD_SEND_SS "Send SS command" VAL 0x12 SAT_CMD_SEND_USSD "Send USSD Command" VAL 0x13 SAT_CMD_SEND_SMS "Send Short Message command" VAL 0x14 SAT_CMD_SEND_DTMF "Send DTMF command" VAL 0x15 SAT_CMD_LAUNCH_BROWSER "Launch WWW Browser class c" VAL 0x20 SAT_CMD_PLAY_TONE "Play tone command" VAL 0x21 SAT_CMD_DISPLAY_TEXT "Display text command" VAL 0x22 SAT_CMD_GET_INKEY "Get inkey command" VAL 0x23 SAT_CMD_GET_INPUT "Get input command" VAL 0x24 SAT_CMD_SEL_ITEM "Select item command" VAL 0x25 SAT_CMD_SETUP_MENU "Set up menu command" VAL 0x26 SAT_CMD_PROV_LOC_INFO "Provide loacal information command" VAL 0x27 SAT_CMD_TIMER_MNG "Timer Managemant command" VAL 0x28 SAT_CMD_IDLE_TEXT "Set up idle mode text command" VAL 0x34 SAT_CMD_RUN_AT "Run AT command" VAL 0x40 SAT_CMD_OPEN_CHANNEL "Open data channel for CS or GPRS class e" VAL 0x41 SAT_CMD_CLOSE_CHANNEL "Close data channel class e" VAL 0x42 SAT_CMD_RECEIVE_DATA "Receive data from ME from the channel class e" VAL 0x43 SAT_CMD_SEND_DATA "Send the data to the channel via ME class e" VAL 0x44 SAT_CMD_GET_CHANNEL_STATUS "Get the status of the data channel opened class e" VAL 0x81 SAT_CMD_END_SESSION "End of proactive session command" VALTAB VAL_cmd_qlf VAL 0x00 QLF_RFSH_INIT "Refresh: SIM initialization" VAL 0x01 QLF_RFSH_INIT_FULL_CHNG_NTFY "Refresh: SIM initialization and full file change notification" VAL 0x02 QLF_RFSH_FILE_CHNG_NTFY "Refresh: File change notification" VAL 0x03 QLF_RFSH_INIT_FILE_CHNG_NTFY "Refresh: SIM initialization and file change notification" VAL 0x04 QLF_RFSH_RESET "Refresh: SIM reset" VAL 0x00 QLF_CALL_IDLE "Set up call: idle" VAL 0x01 QLF_CALL_IDLE_RDL "Set up call: idle with redial" VAL 0x02 QLF_CALL_HOLD "Set up call: hold" VAL 0x03 QLF_CALL_HOLD_RDL "Set up call: hold with redial" VAL 0x04 QLF_CALL_DISC "Set up call: disconnect" VAL 0x05 QLF_CALL_DISC_RDL "Set up call: disconnect with redial" VAL 0b00000000 QLF_SMS_NO_PACK "Send SMS: packing not required" VAL 0b00000001 QLF_SMS_PACK "Send SMS: packing required" VAL 0b00000000 QLF_DISP_PRIO_NORM "Display text: normal priority" VAL 0b00000001 QLF_DISP_PRIO_HIGH "Display text: high priority" VAL 0b00000000 QLF_DISP_CLR_DELAY "Display text: clear message after delay" VAL 0b10000000 QLF_DISP_CLR_USER "Display text: wait for user to clear message" VAL 0b00000000 QLF_INKY_DIGITS "Get inkey: digits (0-9, *,# and +) only" VAL 0b00000001 QLF_INKY_ALPHA "Get inkey: alphabet set" VAL 0b00000000 QLF_INKY_SMS_DEF "Get inkey; SMS default alphabet" VAL 0b00000010 QLF_INKY_UCS2 "Get inkey: UCS2 alphabet" VAL 0b00000000 QLF_INKY_NO_HELP "Get inkey: no help information available" VAL 0b10000000 QLF_INKY_HELP "Get inkey: help information available" VAL 0b00000000 QLF_INPT_DIGITS "Get input: digits (0-9, *,# and +) only" VAL 0b00000001 QLF_INPT_ALPHA "Get input: alphabet set" VAL 0b00000000 QLF_INPT_SMS_DEF "Get input; SMS default alphabet" VAL 0b00000010 QLF_INPT_UCS2 "Get input: UCS2 alphabet" VAL 0b00000000 QLF_INPT_ECHO "Get input: ME may echo input" VAL 0b00000100 QLF_INPT_NO_ECHO "Get input: input shall not revealed in any way" VAL 0b00000000 QLF_INPT_NO_PACK "Get input: unpacket input format" VAL 0b00001000 QLF_INPT_PACK "Get input: SMS packed input format" VAL 0b00000000 QLF_INPT_NO_HELP "Get input: no help information available" VAL 0b10000000 QLF_INPT_HELP "Get input: help information available" VAL 0b00000000 QLF_SITM_NOPRES "Select item: presentation type is not specified" VAL 0b00000001 QLF_SITM_PRES "Select item: presentation type is specified in bit 2" VAL 0b00000000 QLF_SITM_CHVAL "Select item: presentation as a choice of data values if bit 1 = '1'" VAL 0b00000010 QLF_SITM_CHNAV "Select item: presentation as a choice of navigation options if bit 1 is '1'" VAL 0b00000000 QLF_SITM_SEL_NOPREF "Select item: no selection preference" VAL 0b00000100 QLF_SITM_SEL_PREF_SOFTKEY "Select item: selection using soft key preferred" VAL 0b00000000 QLF_SITM_NO_HELP "Select item: no help information available" VAL 0b10000000 QLF_SITM_HELP "Select item: help information available" VAL 0b00000000 QLF_SMNU_SEL_NOPREF "Set up menu: no selection preference" VAL 0b00000001 QLF_SMNU_SEL_PREF_SOFTKEY "Set up menu: selection using soft key preferred" VAL 0b00000000 QLF_SMNU_NO_HELP "Set up menu: no help information available" VAL 0b10000000 QLF_SMNU_HELP "Set up menu: help information available" VAL 0x00 QLF_PLOI_LOC_INFO "Provide local information: Local information" VAL 0x01 QLF_PLOI_IMEI "Provide local information: IMEI of ME" VAL 0x02 QLF_PLOI_NTW_MSR "Provide local information: Network measurement results" VAL 0x03 QLF_PLOI_DTT "Provide local information: Date, Time and Timezone" VAL 0x04 QLF_PLOI_LANG_SET "Provide local information: Language Setting" VAL 0x05 QLF_PLOI_TIM_ADV "Provide local information: Timing Advance" VAL 0x00 QLF_LABR_IF_NOT_LCHD "Launch Browser: launch browser, if not already launched" VAL 0x02 QLF_LABR_NOT_USED1 "Launch Browser: not used" VAL 0x02 QLF_LABR_USE_EXISTING "Launch Browser: use the existing browser" VAL 0x03 QLF_LABR_CLOSE_AND_NEW "Launch Browser: close the existing browser session and launch new browser session" VAL 0x04 QLF_LABR_NOT_USED2 "Launch Browser: not used" VAL 0b00000000 QLF_OPCH_ON_DEMD_LINK_EST "Open Channel: on demand link establishment (class e)" VAL 0b00000001 QLF_OPCH_IMMDT_LINK_EST "Open Channel: immediate link establishment (class e)" VAL 0b00000000 QLF_OPCH_NO_AUTO_RECONNECT "Open Channel: no automatic reconnection (class e)" VAL 0b00000010 QLF_OPCH_AUTO_RECONNECT "Open Channel: automatic reconnection (class e)" VAL 0b00000000 QLF_SNDDAT_TX "Send Data: store data in Tx buffer (class e)" VAL 0b00000001 QLF_SNDDAT_IM "Send Data: Send data immediately (class e)" VALTAB VAL_src_dev VAL 0x01 DEV_SRC_KBD "Device keypad" VAL 0x02 DEV_SRC_DSP "Device display" VAL 0x03 DEV_SRC_EAR "Device earpiece" VAL 0x10 DEV_SRC_CDR0 "Device Additional Card Reader 0" VAL 0x11 DEV_SRC_CDR1 "Device Additional Card Reader 1" VAL 0x12 DEV_SRC_CDR2 "Device Additional Card Reader 2" VAL 0x13 DEV_SRC_CDR3 "Device Additional Card Reader 3" VAL 0x14 DEV_SRC_CDR4 "Device Additional Card Reader 4" VAL 0x15 DEV_SRC_CDR5 "Device Additional Card Reader 5" VAL 0x16 DEV_SRC_CDR6 "Device Additional Card Reader 6" VAL 0x17 DEV_SRC_CDR7 "Device Additional Card Reader 7" VAL 0x21 DEV_SRC_CH1 "Device Channel 1 (class e)" VAL 0x22 DEV_SRC_CH2 "Device Channel 2 (class e)" VAL 0x23 DEV_SRC_CH3 "Device Channel 3 (class e)" VAL 0x24 DEV_SRC_CH4 "Device Channel 4 (class e)" VAL 0x25 DEV_SRC_CH5 "Device Channel 5 (class e)" VAL 0x26 DEV_SRC_CH6 "Device Channel 6 (class e)" VAL 0x27 DEV_SRC_CH7 "Device Channel 7 (class e)" VAL 0x81 DEV_SRC_SIM "Device SIM" VAL 0x82 DEV_SRC_ME "Device mobile equipment" VAL 0x83 DEV_SRC_NTW "Device network" VALTAB VAL_dest_dev VAL 0x01 DEV_DST_KBD "Device keypad" VAL 0x02 DEV_DST_DSP "Device display" VAL 0x03 DEV_DST_EAR "Device earpiece" VAL 0x10 DEV_DST_CDR0 "Device Additional Card Reader 0" VAL 0x11 DEV_DST_CDR1 "Device Additional Card Reader 1" VAL 0x12 DEV_DST_CDR2 "Device Additional Card Reader 2" VAL 0x13 DEV_DST_CDR3 "Device Additional Card Reader 3" VAL 0x14 DEV_DST_CDR4 "Device Additional Card Reader 4" VAL 0x15 DEV_DST_CDR5 "Device Additional Card Reader 5" VAL 0x16 DEV_DST_CDR6 "Device Additional Card Reader 6" VAL 0x17 DEV_DST_CDR7 "Device Additional Card Reader 7" VAL 0x21 DEV_DST_CH1 "Device Channel 1 (class e)" VAL 0x22 DEV_DST_CH2 "Device Channel 2 (class e)" VAL 0x23 DEV_DST_CH3 "Device Channel 3 (class e)" VAL 0x24 DEV_DST_CH4 "Device Channel 4 (class e)" VAL 0x25 DEV_DST_CH5 "Device Channel 5 (class e)" VAL 0x26 DEV_DST_CH6 "Device Channel 6 (class e)" VAL 0x27 DEV_DST_CH7 "Device Channel 7 (class e)" VAL 0x81 DEV_DST_SIM "Device SIM" VAL 0x82 DEV_DST_ME "Device mobile equipment" VAL 0x83 DEV_DST_NTW "Device network" VALTAB VAL_time_unit VAL 0x00 TU_MIN "Minutes" VAL 0x01 TU_SEC "Seconds" VAL 0x02 TU_100_MSEC "Tenth of seconds" VALTAB VAL_noa VAL DEF "Reserved" VAL 0b000 NOA_UNKNOWN "unknown" VAL 0b001 NOA_INTER_NUM "international number" VAL 0b010 NOA_NATIO_NUM "national significant number" VAL 0b011 NOA_NETW_NUM "network specific number" VAL 0b100 NOA_SUBSC_NUM "subscriber number" VAL 0b110 NOA_ABBRV_NUM "abbreviated number" VALTAB VAL_npi VAL DEF "reserved" VAL 0b0000 NPI_UNKNOWN "unknown" VAL 0b0001 NPI_ISDN "ISDN/Telephony Numbering Plan (Rec CCITT E.164)" VAL 0b0011 NPI_X121 "data numbering plan (CCITT Rec X.121)" VAL 0b0100 NPI_F69 "telex numbering plan (CCITT Rec F.69)" VAL 0b0110 NPI_LAND_MOBILE "land mobile numbering plan (CCITT Rec E.212)" VAL 0b1000 NPI_NATIONAL "land mobile numbering plan (CCITT Rec E.212)" VAL 0b1001 NPI_PRIVATE "Private numbering plan" VALTAB VAL_gen VAL 0x00 RSLT_PERF_SUCCESS "Command performed successfully" VAL 0x01 RSLT_PERF_PART_CMPR "Command performed with partial comprehension" VAL 0x02 RSLT_PERF_MISS_INFO "Command performed with missing information" VAL 0x03 RSLT_RFSH_ADD_EF "Refresh performed with additional EF read" VAL 0x05 RSLT_PERF_MDFY_SIM "Command performed but modified by SIM" VAL 0x06 RSLT_PERF_LIM_SRV "Command performed successfully, limited service" VAL 0x07 RSLT_PERF_MDFIED "Command performed with modification (class e)" VAL 0x10 RSLT_SESS_USR_TERM "Proactive SIM session terminated by user" VAL 0x11 RSLT_SESS_USR_BACK "Backward move in proactive SIM session" VAL 0x12 RSLT_NO_RESP "No response from user" VAL 0x13 RSLT_HELP_USR_REQ "Help information required by user" VAL 0x14 RSLT_USER_TERM_SS "SS or USSD transaction terminated by user" VAL 0x20 RSLT_ME_UNAB_PROC "ME is unable to process command" VAL 0x21 RSLT_NTW_UNAB_PROC "Network is unable to process command" VAL 0x22 RSLT_USR_REJ "User did not accept set up request" VAL 0x23 RSLT_USR_CLR_DWN "User cleared down call before connection or network release" VAL 0x25 RSLT_CC_SIM_TMP "Interaction with call control by SIM temporary problem" VAL 0x26 RSLT_LABRWS_GENERIC "Launch browser generic error code (class e)" VAL 0x30 RSLT_ME_CAP "Command beyond ME capabilities" VAL 0x31 RSLT_UNKN_TYPE "Command type not understood" VAL 0x32 RSLT_UNKN_DATA "Command data not understood" VAL 0x33 RSLT_UNKN_NR "Command number not understood" VAL 0x34 RSLT_SS_ERR "SS return error" VAL 0x35 RSLT_SMS_ERR "SMS RP-ERROR" VAL 0x36 RSLT_ERR_REQ_VAL "Error, required values are missing" VAL 0x37 RSLT_USSD_ERR "USSD return error" VAL 0x39 RSLT_CC_SIM_PRM "interaction with call control by SIM or SMS control by SIM permanent problem" VAL 0x3A RSLT_BEARIND_PERR "Bearer Independent Protocol error (class e)" VALTAB VAL_add VAL 0x00 ADD_NO_CAUSE "No specific cause can be given" VAL 0x01 ADD_ME_SCR_BUSY "ME: Screen is busy" VAL 0x02 ADD_ME_CALL_BUSY "ME: currently busy on call" VAL 0x03 ADD_ME_SS_BUSY "ME: currently busy on SS transaction" VAL 0x04 ADD_ME_NO_SERV "ME: no service" VAL 0x05 ADD_ME_ACC_BAR "ME: Access control class bar" VAL 0x06 ADD_ME_RR_DENIED "ME: Radio resource not granted" VAL 0x07 ADD_ME_NO_SPCH_CALL "ME: Not in speech call" VAL 0x08 ADD_ME_USSD_BUSY "ME: currently busy on USSD transaction" VAL 0x01 ADD_CC_NOT_ALLWD "Call Control: Action not allowed" VAL 0x02 ADD_CC_REQ_CHNG "Call Control: Type of request has changed" VAL 0x01 ADD_LBP_BEARR_NAVAIL "Launch browser: Bearer unavailable (class c)" VAL 0x02 ADD_LBP_BRWSR_NAVAIL "Launch browser: Browser unavailable (class c)" VAL 0x03 ADD_LBP_ME_UNABL_RDPD "Launch browser: ME unable to read provisioning data (class c)" VAL 0x01 ADD_BIP_NO_CHAN_AVAIL "No channel available (class e)" VAL 0x02 ADD_BIP_CHAN_CLOSD "Channel closed (class e)" VAL 0x03 ADD_BIP_CHANID_NT_VLD "Channel identifier not valid (class e)" VAL 0x04 ADD_BIP_BUF_SIZ_NAVAIL "Requested buffer size not available (class e)" VAL 0x05 ADD_BIP_SECUR_ERR "Security error (unsuccessful authentication) (class e)" VAL 0x06 ADD_BIP_SIME_ITL_NAVAIL "Requested SIM/ME interface transport level not available (class e)" VALTAB VAL_tos VAL DEF "Reserved" VAL 0b000 TOS_X213 "NSAP (X.213/ISO 8348 AD2)" VAL 0b010 TOS_USER "User Specified" VALTAB VAL_oei VAL 0b0 OEI_EVEN "even number of address signals" VAL 0b1 OEI_ODD "odd number of address signals" VALTAB VAL_event VAL DEF "Reserved" VAL 0x00 EVENT_MT_CALL "Incoming Call" VAL 0x01 EVENT_CALL_CONN "Call is connected" VAL 0x02 EVENT_CALL_DISC "Call is disconnected" VAL 0x03 EVENT_LOC_STATUS "Service status change" VAL 0x04 EVENT_USER_ACTIVE "User activity" VAL 0x05 EVENT_IDLE_SCREEN "Idle screen is available" VAL 0x08 EVENT_BROWS_TERMIN "Browser Termination (if class c supported)" VAL 0x09 EVENT_DATA_AVAIL "Data available (if class e supported)" VAL 0x0A EVENT_CHAN_STAT "Channel Status (if class e supported)" VALTAB VAL_bc_rpi VAL DEF "Reserved" VAL 0x01 BC_RPI_ALT "Alternate mode" VAL 0x03 BC_RPI_SEQ "Sequential mode" VALTAB VAL_loc_state VAL DEF "Reserved" VAL 0x01 LOC_ST_NORMAL "Normal service" VAL 0x02 LOC_ST_LIMITED "Limited service" VAL 0x03 LOC_ST_NOSERV "No service" VALTAB VAL_gprs_pdp_type VAL 0x02 PDP_TYPE_IP "Internet Protocol, IETF STD 5" VALTAB VAL_oth_addr_type VAL DEF "reserved" VAL 0x21 IPv4 "Internet Protocal vers.4" VAL 0x57 IPv6 "Internet Protocal vers.6" VALTAB VAL_trans_prot_type VAL DEF "reserved" VAL 0x1 UDP "User Datagramm Protocol" VAL 0x2 TCP "Transmission Control Protocol" VALTAB VAL_browser VAL DEF "reserved" VAL 0x00 DEFAULT_BROWSER "Default browser usage" VALTAB VAL_bearer VAL DEF "reserved" VAL 0x00 B_SMS "short message service" VAL 0x01 B_CSD "circle switched data" VAL 0x02 B_USSD "unstructured supplementary service data" VAL 0x03 B_GPRS "generel packet radio systeme" VALTAB VAL_brows_term_s VAL 0x00 USER_TERMINATION "terminated by user action" VAL 0x01 ERROR_TERMINATION "terminated by error" VALTAB VAL_chan_id VAL 0b000 NO_CHAN_AVAIL "" VAL 0b001 CHANNEL_ID_1 "" VAL 0b010 CHANNEL_ID_2 "" VAL 0b011 CHANNEL_ID_3 "" VAL 0b100 CHANNEL_ID_4 "" VAL 0b101 CHANNEL_ID_5 "" VAL 0b110 CHANNEL_ID_6 "" VAL 0b111 CHANNEL_ID_7 "" VALTAB VAL_chan_stat_inf1 VAL DEF "reserved" VALTAB VAL_chan_stat_link VAL 0b00 LINK_NO_ESTABL "link not established or PDP context not activated" VAL 0b01 LINK_ESTABL "link established or PDP context activated" VALTAB VAL_chan_stat_inf2 VAL DEF "reserved" VAL 0b00000000 NO_FURTH_INFO "no further info can be given" VAL 0b00000001 "reserved" VAL 0b00000010 "reserved" VAL 0b00000011 "reserved" VAL 0b00000100 "reserved" VAL 0b00000101 LINK_DROPPED "link dropped" VALTAB VAL_bear_type VAL 0x01 BT_CSD "bearer type CSD" VAL 0x02 BT_GPRS "bearer type GPRS" VAL 0x03 BT_DEFAULT "default bearer parameters" VAR cmd_prms "Parameters" 1952 VAR cmd_nr "Command number" 8 VAR cmd_typ "Command type" 8 VAL @m_sat - VAL_cmd_typ@ VAR cmd_qlf "Command qualifier" 8 VAL @m_sat - VAL_cmd_qlf@ VAR src_dev "Source device" 8 VAL @m_sat - VAL_src_dev@ VAR dest_dev "Destination device" 8 VAL @m_sat - VAL_dest_dev@ VAR alpha_id "Alpha identifier" 8 VAR alpha_id_2 "Alpha identifier" 8 VAR ss_ctrl_string "SS control string" 4 VAR cap_cnf_parms "Capability configuration parameter 1" MAX_CAP_CNF_LEN VAR cap_cnf_parms_2 "Capability configuration parameter 2" MAX_CAP_CNF_LEN VAR time_unit "Time unit" 8 VAL @m_sat - VAL_time_unit@ VAR time_ivl "Time interval" 8 VAR msg_type "Message type" 8 VAR noa "Nature of address" 3 VAL @m_sat - VAL_noa@ VAR npi "Numbering plan indication" 4 VAL @m_sat - VAL_npi@ VAR bcdDigit "BCD digit" 4 VAR gen "General result" 8 VAL @m_sat - VAL_gen@ VAR add "Additional information" 1952 VAL @m_sat - VAL_add@ VAR dcs "Data coding scheme" 8 VAR text_str "Text string" 8 VAR item "Choosen item" 8 VAR mnc_mcc "MNC and MCC" 24 VAR lac "Location area code" 16 VAR cid "Cell identity value" 16 VAR imei "IMEI" 64 VAR ntw_msr_res "Network measurement results" 128 VAR bcch_list "BCCH channel list" 384 VAR cb_page "Cell broadcast page" 704 VAR cc_req_act "CC requested action" 1936 VAR tos "Type of subaddress" 3 VAL @m_sat - VAL_tos@ VAR oei "Odd/even indicator" 1 VAL @m_sat - VAL_oei@ VAR tpdu_data "Short Message Data" 8 VAR ussd_str "USSD string" 8 VAR icon_qu "Icon Qualifier" 8 VAR icon_id "Icon Identifier" 8 VAR event "List of events" 8 VAL @m_sat - VAL_event@ VAR ti "Transaction Identifier" 4 VAR cs "Cause" 8 VAR bc_rpi "BC Repeat Indicator" 8 VAL @m_sat - VAL_bc_rpi@ VAR loc_state "Location status" 8 VAL @m_sat - VAL_loc_state@ VAR at_string "AT string" 8 VAR csd_speed "CSD speed" 8 VAR csd_name "CSD name" 8 VAR csd_ce "CSD connection elem" 8 VAR gprs_prec "GPRS precedence" 8 VAR gprs_delay "GPRS delay" 8 VAR gprs_rely "GPRS reliability" 8 VAR gprs_peak "GPRS peak throughput" 8 VAR gprs_mean "GPRS mean throughput" 8 VAR gprs_pdp_type "GPRS PDP type" 8 VAL @m_sat - VAL_gprs_pdp_type@ VAR ch_dat_str "Channel data string" 8 VAR chan_dat_lth "Channel data length" 8 VAR buffer_size "Buffer size" 16 VAR oth_addr_type "Type of local Address" 8 VAL @m_sat - VAL_oth_addr_type@ VAR ipv4_addr "IPv4 address" 8 VAR ipv6_addr "IPv6 address" 8 VAR trans_prot_type "Transport protocol type" 8 VAL @m_sat - VAL_trans_prot_type@ VAR port_number "Port number" 16 VAR browser "Browser" 8 VAL @m_sat - VAL_browser@ VAR url_value "URL value" 8 VAR bearer "Bearer List" 8 VAL @m_sat - VAL_bearer@ VAR prov_file_id "Provisioning File Path Id" 8 VAR brows_term_s "Browser Termination Source" 8 VAL @m_sat - VAL_brows_term_s@ VAR chan_id "Channel Status Identifier" 3 VAL @m_sat - VAL_chan_id@ VAR chan_stat_inf1 "Channel Status Information1" 4 VAL @m_sat - VAL_chan_stat_inf1@ VAR chan_stat_link "Channel Status Link" 1 VAL @m_sat - VAL_chan_stat_link@ VAR chan_stat_inf2 "Channel Status Information2" 8 VAL @m_sat - VAL_chan_stat_inf2@ VAR n_acc_name "Network Access name" 8 VAR bear_type "Bearer type" 8 VAL @m_sat - VAL_bear_type@ VAR lang_buf "Provide Local Info/Language Setting" 8 VAR subadr_str "sub address bytes" 8 COMP cmd_details "Command details" { cmd_nr ; Command number cmd_typ ; Command type cmd_qlf ; Command qualifier } COMP dev_ids "Device identities" { src_dev ; Source device dest_dev ; Destination device } COMP pas_cmd "Proactive SIM Command" { GSM5_TLV cmd_details 0x81 ; Command details GSM5_TLV dev_ids 0x82 ; Device identities GSM5_V cmd_prms ; Command parameters } COMP ss_string "SS string" { + noa ; Nature of address * npi ; Numbering plan identification BCDEVEN ss_ctrl_string [0..MAX_SS_STRING_LEN] ; SS control string } COMP addr "Address" { + noa ; Nature of address * npi ; Numbering plan identification BCDEVEN bcdDigit [0..MAX_PARTY_NUM_SAT] ; BCD digit } COMP subaddr "Subaddress" { + tos ; Type of subaddress oei ; Odd/even indicator * .000 ; Spare subadr_str [0..MAX_SUBADDR_NUM] ; Structured Element Item } COMP res "Result" { gen ; General result GSM5_V add ; Additional information } TYPEDEF COMP res res_2 "Result 2" COMP text "Text string" { dcs ; Data coding scheme text_str [0..MAX_TEXT_LEN] ; text string } TYPEDEF COMP text text2 "Text string2" COMP item_id "Item identifier" { item ; Choosen item } COMP cc_smc_loc_info "CC and SMC Location Information" { mnc_mcc ; MNC and MCC lac ; Location Area Code cid ; Cell Identity Value } COMP cbd_cmd "CB download" { GSM5_TLV dev_ids 0x82 ; Device identities GSM5_TLV cb_page 0x8C ; Cell broadcast page } COMP dur "Duration" { time_unit ; Time unit time_ivl ; Time interval } TYPEDEF COMP dur dur2 "Duration2" COMP ussd_string "USSD string" { dcs ; Data coding scheme ussd_str [0..MAX_SAT_USSD_LEN] ; USSD string } COMP ccr_allw "Call control result, allowed" { GSM5_TLV addr 0x06 ; Address GSM5_TLV ss_string 0x09 ; SS string GSM5_TLV ussd_string 0x0A ; USSD string GSM5_TLV cap_cnf_parms 0x07 ; Capabilitiy conf. parameter 1 GSM5_TLV subaddr 0x08 ; Subaddress GSM5_TLV alpha_id [MAX_ALPHA_ID_LEN] 0x05 ; Alpha identifier GSM5_TLV bc_rpi 0x2A ; BC Repeat Indicator GSM5_TLV cap_cnf_parms_2 0x07 ; Capabilitiy conf. parameter 2 } TYPEDEF COMP ccr_allw ccr_not_allw "Call control result, not allowed" TYPEDEF COMP ccr_allw ccr_allw_mdfy "Call Control result, allowed with modifications" COMP cc_cmd "Call control" { GSM5_TLV dev_ids 0x82 ; Device identities GSM5_TLV addr 0x86 ; Address GSM5_TLV ss_string 0x89 ; SS string GSM5_TLV ussd_string 0x8A ; USSD string GSM5_TLV cap_cnf_parms 0x07 ; Capabilitiy configuration parameter 1 GSM5_TLV subaddr 0x08 ; Subaddress GSM5_TLV cc_smc_loc_info 0x13 ; CC and SMC Location Information GSM5_TLV cap_cnf_parms_2 0x07 ; Capabilitiy configuration parameter 2 } COMP smpdu "SMS TPDU" { tpdu_data [7..MAX_SMS_TPDU_LEN] ; Short Message Data } COMP icon "Icon Identifier" { icon_qu ; Icon Qualifier icon_id ; Icon Identifier } TYPEDEF COMP icon icon_2 "Icon Identifier" COMP ev_list "Event list" { event [1..MAX_EVENT_LIST_LEN] ; List of events } COMP dtmf_string "DTMF string" { BCDEVEN bcdDigit [0..MAX_DTMF_LEN] ; BCD digit } COMP ti_oct "Transaction Identifier octet" { ti ; Transaction Identifier .0000 ; Spare } COMP ti_list "Transaction identifier list" { ti_oct [1..MAX_TI_LEN] ; Single Transaction Identifier } COMP cause "Cause information element" { cs [0..MAX_CAUSE_LEN] ; Cause } COMP sm_addr "Address 1" { + noa ; Nature of address * npi ; Numbering plan identification BCDEVEN bcdDigit [0..MAX_SMS_DIGIT_LEN] ; BCD digit } TYPEDEF COMP sm_addr sm_addr_2 "Address 2" COMP smc_cmd "Call control" { GSM5_TLV dev_ids 0x82 ; Device identities GSM5_TLV sm_addr 0x86 ; Short Message Address 1 GSM5_TLV sm_addr_2 0x86 ; Short Message Address 2 GSM5_TLV cc_smc_loc_info 0x93 ; CC and SMC Location Information } COMP smcr_allw "Call control result, allowed" { GSM5_TLV sm_addr 0x06 ; Service Center Address GSM5_TLV sm_addr_2 0x06 ; Destination Address GSM5_TLV alpha_id [MAX_ALPHA_ID_LEN] 0x05 ; Alpha identifier } TYPEDEF COMP smcr_allw smcr_not_allw "Call control result, not allowed" TYPEDEF COMP smcr_allw smcr_allw_mdfy "Call Control result, allowed with modifications" COMP at_resp "AT response" { text_str [0..MAX_CMD_AT_LEN] ; text string } COMP chan_data "Channel data" { ch_dat_str [0..241] ; Channel data string } COMP other_addr "Other Address" { oth_addr_type ; Other Address type < (oth_addr_type = 0x21) ipv4_addr [4] > ; IPv4 parameter < (oth_addr_type = 0x57) ipv6_addr [16] > ; IPv6 parameter } TYPEDEF COMP other_addr data_dest_addr "Data Destination Address" COMP if_transp_lev "Interface transport level" { trans_prot_type ; Transport protocol type port_number ; Port number } COMP browser_id "Browser Identity" { browser ; Browser Identity } COMP url "URL" { url_value [0..MAX_URL_LEN] ; URL Value } COMP prov_file_ref "Provisioning File Reference" { prov_file_id [0..MAX_PROV_F_PATH_LEN] ; Provisioning File Path Id } COMP brows_term_cause "Browser Termination Cause" { brows_term_s ; Browser Termination Source } COMP chan_stat "Channel Status Parameter" { chan_stat_link ; Channel Status Link chan_stat_inf1 ; Channel Status Information1 chan_id ; Channel Identifier chan_stat_inf2 ; Channel Status Information2 } COMP evd_cmd "Call control" { GSM5_TLV ev_list 0x99 ; Event list GSM5_TLV dev_ids 0x82 ; Device identities GSM5_TLV ti_list 0x9C ; Transaction identifier list GSM5_TLV addr 0x06 ; Address GSM5_TLV subaddr 0x08 ; Subaddress GSM5_TLV cause 0x1A ; Cause information element GSM5_TLV loc_state 0x9B ; Location status GSM5_TLV cc_smc_loc_info 0x13 ; CC and SMC Location Information GSM5_TLV brows_term_cause 0x35 ; Browser Termination cause GSM5_TLV chan_stat 0xB8 ; Channel status GSM5_TLV chan_dat_lth 0xB7 ; Channel data length } COMP csd_bear_prm "CSD bearer parameter" { csd_speed ; CSD speed csd_name ; CSD name csd_ce ; CSD connection elem } COMP gprs_bear_prm "GPRS bearer parameter" { gprs_prec ; GPRS precedence gprs_delay ; GPRS delay gprs_rely ; GPRS reliability gprs_peak ; GPRS peak throughput gprs_mean ; GPRS mean throughput gprs_pdp_type ; GPRS PDP type } COMP bear_desc "Bearer description" { bear_type ; Bearer type < (bear_type = 1) csd_bear_prm > ; CSD bearer parameter < (bear_type = 2) gprs_bear_prm > ; GPRS bearer parameter } COMP nan_buf "Network access name buffer" { n_acc_name [0..MAX_SAT_APN_LEN] ; Network access name } COMP dtt "Date-Time and Time zone" { text_str [0..7] ; text string } COMP lang "language Preferance" { lang_buf [0..2] ; text string } MSG stk_cmd downlink 0b11100000 ; SAT Command { GSM3_V msg_type ; Message Type GSM5_TLV pas_cmd 0xD0 ; Proactive SIM Command } MSG send_ss downlink SAT_CMD_SEND_SS ; Send SS string { GSM3_V msg_type ; Message Type GSM5_TLV alpha_id [MAX_ALPHA_ID_LEN] 0x05 ; alpha identifier GSM5_TLV ss_string 0x89 ; ss_string GSM5_TLV icon 0x1E ; Icon Identifier } MSG setup_call downlink SAT_CMD_SETUP_CALL ; Set up call { GSM3_V msg_type ; Message Type GSM5_TLV alpha_id [MAX_ALPHA_ID_LEN] 0x05 ; alpha identifier GSM5_TLV addr 0x86 ; address GSM5_TLV cap_cnf_parms 0x07 ; capability conf. parameter GSM5_TLV subaddr 0x08 ; subaddress GSM5_TLV dur 0x04 ; duration GSM5_TLV icon 0x1E ; Icon Identifier GSM5_TLV alpha_id_2 [MAX_ALPHA_ID_LEN] 0x05 ; alpha identifier GSM5_TLV icon_2 0x1E ; Icon Identifier } MSG send_sm downlink SAT_CMD_SEND_SMS ; Send Short Message { GSM3_V msg_type ; Message Type GSM5_TLV alpha_id [MAX_ALPHA_ID_LEN] 0x05 ; alpha identifier GSM5_TLV addr 0x06 ; address GSM5_TLV smpdu 0x8B ; SMS TPDU GSM5_TLV icon 0x1E ; Icon Identifier } MSG send_ussd downlink SAT_CMD_SEND_USSD ; Send USSD string { GSM3_V msg_type ; Message Type GSM5_TLV alpha_id [MAX_ALPHA_ID_LEN] 0x05 ; alpha identifier GSM5_TLV ussd_string 0x8A ; USSD string GSM5_TLV icon 0x1E ; Icon Identifier } MSG send_dtmf downlink SAT_CMD_SEND_DTMF ; Send DTMF string { GSM3_V msg_type ; Message Type GSM5_TLV alpha_id [MAX_ALPHA_ID_LEN] 0x05 ; alpha identifier GSM5_TLV dtmf_string 0xAC ; DTMF string GSM5_TLV icon 0x1E ; Icon Identifier } MSG setup_event downlink SAT_CMD_EVENT_LIST ; Setup Event List { GSM3_V msg_type ; Message Type GSM5_TLV ev_list 0x99 ; Event list } MSG term_resp uplink 0b11100000 ; Terminal response { GSM3_V msg_type ; Message Type GSM5_TLV cmd_details 0x81 ; Command details GSM5_TLV dev_ids 0x82 ; Device identities GSM5_TLV res 0x83 ; Result GSM5_TLV dur 0x84 ; Duration GSM5_TLV text 0x8D ; Text string GSM5_TLV item_id 0x90 ; Item identifier GSM5_TLV cc_smc_loc_info 0x93 ; CC and SMC Location Information GSM5_TLV imei 0x94 ; IMEI GSM5_TLV ntw_msr_res 0x96 ; Network measurement results GSM5_TLV bcch_list 0x9D ; BCCH channel list GSM5_TLV dtt 0xA6 ; Date-Time and Time zone GSM5_TLV cc_req_act 0xA7 ; CC requested action GSM5_TLV res_2 0x83 ; Result 2 GSM5_TLV at_resp 0xA9 ; AT Response GSM5_TLV chan_data 0xB6 ; Channel data GSM5_TLV chan_stat [1..7] 0xB8 ; Channel status GSM5_TLV chan_dat_lth 0xB7 ; Channel data length GSM5_TLV bear_desc 0xB5 ; Bearer Description GSM5_TLV buffer_size 0xB9 ; Buffer size GSM5_TLV lang 0xAD ; Language Preferance } MSG env_cmd uplink 0b11100001 ; Envelope command { GSM3_V msg_type ; Message Type GSM5_TLV cbd_cmd 0xD2 ; CB download command GSM5_TLV cc_cmd 0xD4 ; Call control command GSM5_TLV smc_cmd 0xD5 ; MO-SM control command GSM5_TLV evd_cmd 0xD6 ; Event download command } MSG env_res downlink 0b11100001 ; Envelope command { GSM3_V msg_type ; Message Type GSM5_TLV ccr_allw 0x00 ; Call control result, allowed GSM5_TLV ccr_not_allw 0x01 ; Call control result, not allowed GSM5_TLV ccr_allw_mdfy 0x02 ; Call control result, allowed with modification } MSG env_res_smc downlink 0b11100010 ; Envelope command { GSM3_V msg_type ; Message Type GSM5_TLV smcr_allw 0x00 ; Call control result, allowed GSM5_TLV smcr_not_allw 0x01 ; Call control result, not allowed GSM5_TLV smcr_allw_mdfy 0x02 ; Call control result, allowed with modification } MSG run_at downlink SAT_CMD_RUN_AT ; Run AT command { GSM3_V msg_type ; Message Type GSM5_TLV alpha_id [MAX_ALPHA_ID_LEN] 0x05 ; alpha identifier GSM5_TLV at_string [MAX_CMD_AT_LEN] 0xA8 ; AT string GSM5_TLV icon 0x1E ; Icon Identifier } MSG open_channel downlink SAT_CMD_OPEN_CHANNEL ; Open Channel command { GSM3_V msg_type ; Message Type GSM5_TLV alpha_id [MAX_ALPHA_ID_LEN] 0x05 ; alpha identifier GSM5_TLV icon 0x1E ; Icon Identifier GSM5_TLV addr 0x06 ; address GSM5_TLV subaddr 0x08 ; subaddress GSM5_TLV dur 0x04 ; duration GSM5_TLV dur2 0x04 ; duration2 GSM5_TLV bear_desc 0xB5 ; bearer description GSM5_TLV buffer_size 0xB9 ; Buffer size GSM5_TLV nan_buf 0x47 ; Network Acc Name GSM5_TLV other_addr 0x3E ; other address GSM5_TLV text 0x0D ; Text string GSM5_TLV text2 0x0D ; Text string2 GSM5_TLV if_transp_lev 0x3C ; IF transport level GSM5_TLV data_dest_addr 0x3E ; Data dest address } MSG close_channel downlink SAT_CMD_CLOSE_CHANNEL ; Close Channel command { GSM3_V msg_type ; Message Type GSM5_TLV alpha_id [MAX_ALPHA_ID_LEN] 0x05 ; alpha identifier GSM5_TLV icon 0x1E ; Icon Identifier } MSG receive_data downlink SAT_CMD_RECEIVE_DATA ; Receive Data command { GSM3_V msg_type ; Message Type GSM5_TLV alpha_id [MAX_ALPHA_ID_LEN] 0x05 ; alpha identifier GSM5_TLV icon 0x1E ; Icon Identifier GSM5_TLV chan_dat_lth 0xB7 ; Channel data length } MSG send_data downlink SAT_CMD_SEND_DATA ; Send Data command { GSM3_V msg_type ; Message Type GSM5_TLV alpha_id [MAX_ALPHA_ID_LEN] 0x05 ; alpha identifier GSM5_TLV icon 0x1E ; Icon Identifier GSM5_TLV chan_data 0xB6 ; Channel data } MSG get_cha_stat downlink SAT_CMD_GET_CHANNEL_STATUS ; Get Channel Status command { GSM3_V msg_type ; Message Type } MSG launch_browser downlink SAT_CMD_LAUNCH_BROWSER ; Launch Browser command { GSM3_V msg_type ; Message Type GSM5_TLV browser_id 0x30 ; Browser Identity GSM5_TLV url 0xB1 ; Universal Res Loc GSM5_TLV bearer [0..MAX_BEARER_LIST_LEN] 0x32 ; Bearer GSM5_TLV prov_file_ref [0..MAX_PFP_ELEM] 0x33 ; Prov File Reference GSM5_TLV text 0x0D ; Text string GSM5_TLV alpha_id [0..MAX_ALPHA_ID_LEN] 0x05 ; alpha identifier GSM5_TLV icon 0x1E ; Icon Identifier }