FreeCalypso > hg > fc-magnetite

view src/aci2/aci/aci_bat_mm.c @ 685:3fb7384e820d

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
tpudrv12.h: FCDEV3B goes back to being itself A while back we had the idea of a FreeCalypso modem family whereby our current fcdev3b target would some day morph into fcmodem, with multiple FC modem family products, potentially either triband or quadband, being firmware-compatible with each other and with our original FCDEV3B. But in light of the discovery of Tango modules that earlier idea is now being withdrawn: instead the already existing Tango hw is being adopted into our FreeCalypso family. Tango cannot be firmware-compatible with triband OM/FCDEV3B targets because the original quadband RFFE on Tango modules is wired in TI's original Leonardo arrangement. Because this Leonardo/Tango way is now becoming the official FreeCalypso way of driving quadband RFFEs thanks to the adoption of Tango into our FC family, our earlier idea of extending FIC's triband RFFE control signals with TSPACT5 no longer makes much sense - we will probably never produce any new hardware with that once-proposed arrangement. Therefore, that triband-or-quadband FCFAM provision is being removed from the code base, and FCDEV3B goes back to being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control purposes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 24 Sep 2020 21:03:08 +0000
parents 93999a60b835
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  ACI_BAT
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved. 
|
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This BAT wrapper modul is ...
| 
+----------------------------------------------------------------------------- 
*/ 

#include "aci_all.h"     /* includes prim.h, which includes p_bat.h */ 
#include "aci_cmh.h"     /* prototypes of sAT_,qAT_,tAT_    */ 
#include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ 

#ifdef FF_ATI_BAT
#include "typedefs.h"
#include "gdd.h"
#include "bat.h"
#include "aci_bat.h"
#endif /* FF_ATI_BAT */

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCOPS        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
#undef  min
#define min(a,b) ((a) < (b) ? (a) : (b)) /* from gpf\inc\vcms */

GLOBAL T_ACI_BAT_RSLT sBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  U8   c_oper = cmd->params.ptr_set_plus_cops->c_oper;
  CHAR op[MAX_ALPHA_OPER_LEN] = {0};
  
  TRACE_FUNCTION ("sBAT_PlusCOPS()");

  c_oper = min(c_oper, MAX_ALPHA_OPER_LEN);

  if (cmd->params.ptr_set_plus_cops->v_oper EQ TRUE)
    memcpy(op, cmd->params.ptr_set_plus_cops->oper, c_oper);
  
  ret = sAT_PlusCOPS (src_infos_psi->srcId,
                      cmd->params.ptr_set_plus_cops->mode,
                      cmd->params.ptr_set_plus_cops->format, op);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCOPS        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  CHAR op[MAX_ALPHA_OPER_LEN] = {0};

  T_ACI_COPS_MOD  mode = COPS_MOD_NotPresent;
  T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_cops cops;

  TRACE_FUNCTION ("qBAT_PlusCOPS()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_COPS;
  resp.response.ptr_que_plus_cops = &cops;

  ret = qAT_PlusCOPS(src_infos_psi->srcId, &mode, &format, op);

  cops.mode    = mode;
  cops.format  = format;
  cops.c_oper  = strlen(op);
  cops.v_oper  = cops.c_oper ? TRUE : FALSE;

  if (cops.v_oper)
  {
    memcpy(cops.oper, op, cops.c_oper);
  }
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : tBAT_PlusCOPS        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT tBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_COPS_LST operLst;
  T_BAT_cmd_response resp = {0};
  T_BAT_res_tst_plus_cops *pTPC = resp.response.ptr_tst_plus_cops;

  SHORT startIdx = 0, lastIdx = 0;
  BOOL END_OF_LIST = FALSE;

  TRACE_FUNCTION ("tBAT_PlusCOPS()");

  resp.ctrl_response = BAT_RES_TST_PERCENT_COPS;
  
  do
  {
    int i;

    startIdx += lastIdx;
    ret = tAT_PlusCOPS(src_infos_psi->srcId, startIdx, &lastIdx, &operLst[0]);
    if (ret NEQ ACI_BAT_CMPL)
      return (ret);
    
    for (i = 0; i < lastIdx; i++)
    {
      if ((operLst[i].status EQ COPS_STAT_NotPresent) AND (*operLst[i].numOper EQ 0))
      {
        END_OF_LIST = TRUE;
        break;
      }
      /* Fill BAT resp structs */
      pTPC->status = operLst[i].status;
      pTPC->c_short_oper = strlen(operLst[i].shortOper);
      pTPC->c_long_oper = strlen(operLst[i].longOper);
      pTPC->c_num_oper = strlen(operLst[i].numOper);

      /* Check if there is long operator name, set valid flag and store it. */
      if(pTPC->c_long_oper)
      {
        pTPC->v_long_oper = TRUE;
        strncpy((CHAR*)pTPC->long_oper, operLst[i].longOper, pTPC->c_long_oper);
      }

      /* Check if there is short operator name, set valid flag and store it. */
      if(pTPC->c_short_oper)
      {
        pTPC->v_short_oper = TRUE;
        strncpy((CHAR*)pTPC->short_oper, operLst[i].shortOper, pTPC->c_short_oper);
      }

      /* Check if there is num operator name, set valid flag and store it. */
      if(pTPC->c_num_oper)
      {
        pTPC->v_num_oper = TRUE;
        strncpy((CHAR*)pTPC->num_oper, operLst[i].numOper, pTPC->c_num_oper);
      }

      aci_bat_send(src_infos_psi, &resp);
    }
    return (ACI_BAT_CMPL);
  } while(!END_OF_LIST);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCOPS     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  U8   c_oper = cmd->params.ptr_set_percent_cops->c_oper;
  CHAR op[MAX_ALPHA_OPER_LEN] = {0};

  TRACE_FUNCTION ("sBAT_PercentCOPS()");

  c_oper = min(c_oper, MAX_ALPHA_OPER_LEN);

  if (cmd->params.ptr_set_percent_cops->v_oper EQ TRUE)
    memcpy(op, cmd->params.ptr_set_percent_cops->oper, c_oper);

  ret = sAT_PercentCOPS (src_infos_psi->srcId,
                         cmd->params.ptr_set_percent_cops->mode,
                         cmd->params.ptr_set_percent_cops->format, op);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : tBAT_PercentCOPS     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT tBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_COPS_LST operLst;
  T_BAT_cmd_response resp = {0};
  T_BAT_res_tst_percent_cops *pTPC = resp.response.ptr_tst_percent_cops;

  SHORT startIdx = 0, lastIdx = 0;
  BOOL END_OF_LIST = FALSE;

  TRACE_FUNCTION ("tBAT_PercentCOPS()");

  resp.ctrl_response = BAT_RES_TST_PERCENT_COPS;
  
  do
  {
    int i;

    startIdx += lastIdx;
    ret = tAT_PlusCOPS(src_infos_psi->srcId, startIdx, &lastIdx, &operLst[0]);
    if (ret NEQ ACI_BAT_CMPL)
      return (ret);
    
    for (i = 0; i < lastIdx; i++)
    {
      if ((operLst[i].status EQ COPS_STAT_NotPresent) AND (*operLst[i].numOper EQ 0))
      {
        END_OF_LIST = TRUE;
        break;
      }
      /* Fill BAT resp structs */
      pTPC->status = operLst[i].status;
      pTPC->c_short_oper = strlen(operLst[i].shortOper);
      pTPC->c_long_oper = strlen(operLst[i].longOper);
      pTPC->c_num_oper = strlen(operLst[i].numOper);

      /* Check if there is long operator name, set valid flag and store it. */
      if(pTPC->c_long_oper)
      {
        pTPC->v_long_oper = TRUE;
        strncpy((CHAR*)pTPC->long_oper, operLst[i].longOper, pTPC->c_long_oper);
      }

      /* Check if there is short operator name, set valid flag and store it. */
      if(pTPC->c_short_oper)
      {
        pTPC->v_short_oper = TRUE;
        strncpy((CHAR*)pTPC->short_oper, operLst[i].shortOper, pTPC->c_short_oper);
      }

      /* Check if there is num operator name, set valid flag and store it. */
      if(pTPC->c_num_oper)
      {
        pTPC->v_num_oper = TRUE;
        strncpy((CHAR*)pTPC->num_oper, operLst[i].numOper, pTPC->c_num_oper);
      }

      aci_bat_send(src_infos_psi, &resp);
    }
    return (ACI_BAT_CMPL);
  } while(!END_OF_LIST);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCOPS     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  CHAR op[MAX_ALPHA_OPER_LEN] = {0};

  T_ACI_COPS_MOD  mode = COPS_MOD_NotPresent;
  T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent;
  T_ACI_COPS_SVST svrStatus = COPS_SVST_NotPresent;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_cops cops;

  TRACE_FUNCTION ("qBAT_PercentCOPS()");

  resp.ctrl_response = BAT_RES_QUE_PERCENT_COPS;
  resp.response.ptr_que_percent_cops = &cops;

  ret = qAT_PercentCOPS(src_infos_psi->srcId, &mode, &format, &svrStatus, op);

  cops.mode    = mode;
  cops.format  = format;
  cops.service = svrStatus;
  cops.c_oper  = strlen(op);
  cops.v_oper  = cops.c_oper ? TRUE : FALSE;
  
  if (cops.v_oper)
  {
    memcpy(cops.oper, op, cops.c_oper);
  }
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCREG     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCREG(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_creg creg;

  TRACE_FUNCTION ("qBAT_PercentCREG()");
  
  resp.ctrl_response = BAT_RES_QUE_PERCENT_CREG;
  resp.response.ptr_que_percent_creg = &creg;

  ret = qAT_PercentCREG(src_infos_psi->srcId, 
                        (T_ACI_CREG_STAT*)&creg.stat,
                        (USHORT*)&creg.lac,
                        (USHORT*)&creg.ci,
                        (T_ACI_P_CREG_GPRS_IND*)&creg.gprs_ind);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusWS46        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusWS46(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_plus_ws46_n mode = cmd->params.ptr_set_plus_ws46->n;

  TRACE_FUNCTION ("sBAT_PlusWS46()");

  ret = sAT_PlusWS46(src_infos_psi->srcId, mode);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusWS46        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusWS46(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_ws46 ws46;

  TRACE_FUNCTION ("qBAT_PlusWS46()");
  
  resp.ctrl_response = BAT_RES_QUE_PLUS_WS46;
  resp.response.ptr_que_plus_ws46 = &ws46;

  ret = qAT_PlusWS46(src_infos_psi->srcId, (T_ACI_WS46_MOD *)&ws46.n);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCHPL     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCHPL(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_OPER_NTRY oper;
  UBYTE len;
    
  TRACE_FUNCTION ("sBAT_PercentCHPL()");

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)sAT_PercentCHPL(src_infos_psi->srcId,&oper);

  /*
  *   If the command completes, we must send a response.
  */
  if (ret==ACI_BAT_CMPL)
  {
    T_BAT_cmd_response resp;
    T_BAT_res_set_percent_chpl chpl_data;

    resp.ctrl_response=BAT_RES_SET_PERCENT_CHPL;
    resp.response.ptr_set_percent_chpl=&chpl_data;

    chpl_data.type=BAT_P_CHPL_TYPE_FROM_IMS;

    switch (cmd->params.ptr_set_percent_chpl->oprfrmt)
    {
      case BAT_P_CHPL_OPRFRMT_LONG:
        len=strlen(oper.longName);

        if (len<=BAT_MAX_CHPL_OPER_LEN)
        {
          memcpy(chpl_data.oper,oper.longName,len);
          chpl_data.c_oper=(U8)len;
        }
        else
        {
          return(ACI_BAT_FAIL);
        }
        break;

      case BAT_P_CHPL_OPRFRMT_SHORT:
        len=strlen(oper.shrtName);

        if (len<=BAT_MAX_CHPL_OPER_LEN)
        {
          memcpy(chpl_data.oper,oper.shrtName,len);
          chpl_data.c_oper=(U8)len;
        }
        else
        {
          return(ACI_BAT_FAIL);
        }
        break;
 
      case BAT_P_CHPL_OPRFRMT_NUMERIC:
        /*
        *   Representation of the numeric format as in the ATI.
        */
        if ((oper.mnc & 0x00F)==0xF)
          sprintf((char *)chpl_data.oper, "%03x,%02x",oper.mcc, oper.mnc >> 4);
        else
          sprintf((char *)chpl_data.oper, "%03x,%03x",oper.mcc, oper.mnc);

        chpl_data.c_oper=(U8)strlen((char *)chpl_data.oper);
        break;

      default:
        return(ACI_BAT_FAIL);
        break;
    }

    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCTZU        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCTZU(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusCTZU()");

  ret = sAT_PlusCTZU (src_infos_psi->srcId, cmd->params.ptr_set_plus_ctzu->onoff);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCTZU        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCTZU(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_ctzu ctzu;
  
  TRACE_FUNCTION ("qBAT_PlusCTZU()");
  
  resp.ctrl_response = BAT_RES_QUE_PLUS_CTZU;
  resp.response.ptr_que_plus_ctzu = &ctzu;
  ret = qAT_PlusCTZU(src_infos_psi->srcId, (T_ACI_CTZU_MODE*)&ctzu.onoff);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCWUP     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCWUP(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;

  TRACE_FUNCTION ("sBAT_PercentCWUP()");

  ret = sAT_PercentCWUP (src_infos_psi->srcId, cmd->params.ptr_set_percent_cwup->type);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCTZV     |
+--------------------------------------------------------------------+

  PURPOSE : %CTZV command mode (time and date report)
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCTZV (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                        T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PercentCTZV()");

  ret = sAT_PercentCTZV (src_infos_psi->srcId, 
                         (T_ACI_PCTZV_MODE)cmd->params.ptr_set_percent_ctzv->mode);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCIND        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCIND(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusCIND()");
  
  ret = sAT_PlusCIND( src_infos_psi->srcId,
                      cmd->params.ptr_set_plus_cind->signal_ctrl,
                      cmd->params.ptr_set_plus_cind->smsfull_ctrl);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCIND        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCIND(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_cind cind;

  TRACE_FUNCTION ("qBAT_PlusCIND()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_CIND;
  resp.response.ptr_que_plus_cind = &cind;

  ret = qAT_PlusCIND(src_infos_psi->srcId,
               (T_ACI_CIND_SIGNAL_TYPE*)&cind.signal, 
               (T_ACI_CIND_SMSFULL_TYPE*)&cind.smsfull); 

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCMER        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCMER(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  T_ACI_CMER_MODE_TYPE sCmerModeSettings = CMER_MODE_INVALID;
  T_ACI_CMER_IND_TYPE  sCmerIndicationSettings = CMER_INDICATOR_INVALID;
  T_ACI_CMER_BFR_TYPE  sCmerBfrSettings = CMER_BFR_INVALID;

  TRACE_FUNCTION ("sBAT_PlusCMER()");
  
  switch (cmd->params.ptr_set_plus_cmer->ind_option)
  {
  case BAT_CMER_IND_OPTION_LOWER:
    ret = sAT_PlusCMER(src_infos_psi->srcId,
                       sCmerModeSettings,
                       sCmerIndicationSettings,
                       sCmerBfrSettings);
    break;

  case BAT_CMER_IND_OPTION_GREATER_EQUAL:
    ret = sAT_PlusCMER(src_infos_psi->srcId,
                       sCmerModeSettings,
                       sCmerIndicationSettings,
                       sCmerBfrSettings);
    break;

  case BAT_CMER_IND_OPTION_NOT_PRESENT:
  default:
    return ACI_BAT_FAIL;
    break;
  }
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCMER        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCMER(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_cmer cmer;

  T_ACI_CMER_MODE_TYPE sCmerModeSettings;
  T_ACI_CMER_IND_TYPE  sCmerIndicationSettings;
  T_ACI_CMER_BFR_TYPE  sCmerBfrSettings;

  TRACE_FUNCTION ("qBAT_PlusCMER()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_CMER;
  resp.response.ptr_que_plus_cmer = &cmer;

  ret = qAT_PlusCMER(src_infos_psi->srcId,
                     &sCmerModeSettings,
                     &sCmerIndicationSettings,
                     &sCmerBfrSettings);

  switch (cmd->params.ptr_que_plus_cmer->bat_dummy)
  {
  default:
    break;
  }
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}