FreeCalypso > hg > fc-magnetite
view src/aci2/aci/cmh_psi.h @ 685:3fb7384e820d
tpudrv12.h: FCDEV3B goes back to being itself
A while back we had the idea of a FreeCalypso modem family whereby our
current fcdev3b target would some day morph into fcmodem, with multiple
FC modem family products, potentially either triband or quadband, being
firmware-compatible with each other and with our original FCDEV3B. But
in light of the discovery of Tango modules that earlier idea is now being
withdrawn: instead the already existing Tango hw is being adopted into
our FreeCalypso family.
Tango cannot be firmware-compatible with triband OM/FCDEV3B targets
because the original quadband RFFE on Tango modules is wired in TI's
original Leonardo arrangement. Because this Leonardo/Tango way is now
becoming the official FreeCalypso way of driving quadband RFFEs thanks
to the adoption of Tango into our FC family, our earlier idea of
extending FIC's triband RFFE control signals with TSPACT5 no longer makes
much sense - we will probably never produce any new hardware with that
once-proposed arrangement. Therefore, that triband-or-quadband FCFAM
provision is being removed from the code base, and FCDEV3B goes back to
being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control
purposes.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 24 Sep 2020 21:03:08 +0000 |
parents | 93999a60b835 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : CMH_PKTIO +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definitions for the command handler of the | psi managment. +----------------------------------------------------------------------------- */ #ifdef FF_PSI #ifndef CMH_PSI_H #define CMH_PSI_H #include "aci_lst.h" /*==== CONSTANTS ==================================================*/ #define ACI_DIO_ID_MASK 0x0000FF00 /* bit 08-15: device combination id from DIO Interface layer, v4 */ /*==== TYPES ======================================================*/ typedef enum{ PSI_DTI_CLS_CNF, PSI_DTI_CLS_IND }T_PSI_DTI_CLS_TYP; typedef union { T_DIO_CAP_SER dio_cap_ser; T_DIO_CAP_SER_MUX dio_cap_ser_mux; T_DIO_CAP_PKT dio_cap_pkt; } T_DIO_CAP_PSI; typedef T_DIO_CAP_PSI T_ACI_PSI_CAP_PAR; typedef union { T_DIO_DCB_SER dio_cap_ser; T_DIO_DCB_SER_MUX dio_cap_ser_mux; T_DIO_DCB_PKT dio_cap_pkt; } T_ACI_PSI_CAP; typedef union { T_DIO_DCB_SER dio_dcb_ser; T_DIO_DCB_SER_MUX dio_dcb_ser_mux; T_DIO_DCB_PKT dio_dcb_pkt; } T_ACI_PSI_DCB_PAR; typedef struct { U32 devId; T_ACI_PSI_DCB_PAR dcbPar; } T_ACI_DEVICE_DCB_ENTRY; typedef struct { U32 devId; T_ACI_PSI_CAP_PAR psi_cap; U8 psi_data_mode; } T_ACI_PSI; typedef struct { UBYTE src_id; T_DTI_ENTITY_ID entity_to_conn; UBYTE num_entities; T_DTI_CONN_MODE mode; T_DTI_CONN_CB* cb; UBYTE capability; UBYTE cid; T_ACI_AT_CMD last_cmd; }T_ACI_PSI_CALL_TYPE; /*==== PROTOTYPES =================================================*/ EXTERN void cmhPSI_DTI_OpenCnf (U32 devId, U32 link_id, T_DTI_CONN_RESULT result); EXTERN void cmhPSI_DTI_Close (U32 devId, T_PSI_DTI_CLS_TYP state, U32 link_id); EXTERN void cmhPSI_Line_State_Ind (U32 devId, U16 line_state); EXTERN BOOL cmhPSItest_srcId( UBYTE srcId, void *elem); EXTERN void cmhPSI_getdata ( T_ACI_CMD_SRC srcId ); EXTERN BOOL cmhPSItest_device (U32 devId, void *elem); EXTERN void cmhPSI_AddDeviceToDcbParameter( U32 devId, U32 dio_driver_type); EXTERN void cmhPSI_erase_src_elem(UBYTE srcId); EXTERN void cmhPSI_RemoveDeviceFromDcbParameter( U32 devId ); EXTERN void cmhPSI_CleanDcbParameterList( void ); EXTERN T_ACI_DEVICE_DCB_ENTRY* cmhPSI_GetDcbParOverDevice( U32 devId ); EXTERN T_ACI_DEVICE_DCB_ENTRY* cmhPSI_GetDeviceParOverSrcID( UBYTE srcId ); EXTERN UBYTE cmhPSI_GetParityOverSrcID( UBYTE srcId ); EXTERN UBYTE cmhPSI_GetStopBitOverSrcID( UBYTE srcId ); EXTERN UBYTE cmhPSI_GetDataBitOverSrcID( UBYTE srcId ); EXTERN void cmhPSI_SetDcbParToUnchanged( T_ACI_DEVICE_DCB_ENTRY *dcbntry ); EXTERN T_ACI_RETURN cmhPSI_SetDataRate ( UBYTE srcId, T_ACI_BD_RATE rate); EXTERN T_ACI_RETURN cmhPSI_SetCharacterFraming ( UBYTE srcId, T_ACI_BS_FRM format, T_ACI_BS_PAR parity ); EXTERN void cmhPSI_Ind (T_ACI_PSI *psi_indic_msg, UBYTE src_id,U32 dio_cap); EXTERN T_ACI_RETURN cmhPSI_SetFlowControl (UBYTE srcId, T_ACI_RX_FLOW_CTRL DCE_by_DTE); EXTERN const T_ACI_RETURN cmhPSI_SetEscape( UBYTE srcId, UBYTE detection ); EXTERN T_ACI_BS_FRM cmhPSI_GetFktInterfaceFormat( T_ACI_DEVICE_DCB_ENTRY *dcbntry ); EXTERN T_ACI_BS_PAR cmhPSI_GetFktInterfaceParity( T_ACI_DEVICE_DCB_ENTRY *dcbntry ); EXTERN T_ACI_DTI_PRC_PSI *cmhPSI_find_dlci (T_ACI_LIST *search_list, U32 devId, UBYTE dlci ); EXTERN void cmhPSI_lst_init (void); EXTERN void cmhPSI_clean_all_elem(void); EXTERN T_ACI_LIST *psi_src_params; EXTERN T_ACI_LIST *psi_dcb_par; EXTERN const void psaPSI_SetConfReq( T_ACI_DEVICE_DCB_ENTRY *dcbPar ); /*==== EXPORT =====================================================*/ #ifdef CMH_PSIF_C GLOBAL T_ACI_PSI_CALL_TYPE psi_ato; #else EXTERN T_ACI_PSI_CALL_TYPE psi_ato; #endif /* CMH_PSIF_C */ #endif /*CMH_PSI_H*/ #endif /*==== EOF =======================================================*/