view src/aci2/aci/cmh_psir.c @ 685:3fb7384e820d

tpudrv12.h: FCDEV3B goes back to being itself A while back we had the idea of a FreeCalypso modem family whereby our current fcdev3b target would some day morph into fcmodem, with multiple FC modem family products, potentially either triband or quadband, being firmware-compatible with each other and with our original FCDEV3B. But in light of the discovery of Tango modules that earlier idea is now being withdrawn: instead the already existing Tango hw is being adopted into our FreeCalypso family. Tango cannot be firmware-compatible with triband OM/FCDEV3B targets because the original quadband RFFE on Tango modules is wired in TI's original Leonardo arrangement. Because this Leonardo/Tango way is now becoming the official FreeCalypso way of driving quadband RFFEs thanks to the adoption of Tango into our FC family, our earlier idea of extending FIC's triband RFFE control signals with TSPACT5 no longer makes much sense - we will probably never produce any new hardware with that once-proposed arrangement. Therefore, that triband-or-quadband FCFAM provision is being removed from the code base, and FCDEV3B goes back to being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control purposes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 24 Sep 2020 21:03:08 +0000
parents 93999a60b835
children
line wrap: on
line source

/*
+------------------------------------------------------------------------------
|  File:       cmh_psir.c
+------------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG.
+------------------------------------------------------------------------------
| Purpose:     This module defines the functions used by the command
|              handler for packet I/O (PSI).
+------------------------------------------------------------------------------
*/
#ifdef FF_PSI

#ifndef CMH_PSIR_C
#define CMH_PSIR_C
#endif

#include "aci_all.h"
/*==== INCLUDES ===================================================*/

#ifdef GPRS
#include "gprs.h"
#endif
#include "dti.h"      /* functionality of the dti library */
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"

#include "aci.h"
#include "psa.h"

#include "cmh.h"
#include "dti_conn_mng.h"
#include "dti_cntrl_mng.h"
#ifdef GPRS
#include "gaci.h"
#include "gaci_cmh.h"
#endif


#include "sap_dti.h"
#include "cmh_sm.h"

#include "psa_psi.h"
#include "cmh_psi.h"
#include "ati_src_psi.h"


#ifndef CMH_UARTR_C
#define CMH_UARTR_C
#endif

#include "aci_all.h"


/*==== CONSTANTS ==================================================*/
#define MAX_BAUD_RATE 20
/*==== TYPES ======================================================*/

/*==== EXPORT =====================================================*/

/*==== VARIABLES ==================================================*/


/*==== FUNCTIONS ==================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GPRS (8441)                      MODULE  : CMH_PSI       |
| STATE   : finished                         ROUTINE : cmhPSI_Ind    |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL void cmhPSI_Ind (T_ACI_PSI *psi_indic_msg, UBYTE src_id,U32 dio_cap)
{
#ifdef DTI
  UBYTE capability = DTI_CPBLTY_NO;
  UBYTE dti_capability;
  BOOL ret_val1 = FALSE;
  BOOL ret_val2 = FALSE;
  T_DTI_ENTITY_ID entity_list[] = {DTI_ENTITY_ACI};
 
  TRACE_FUNCTION ("cmhPSI_Ind()");
  /* register device to the DTI Control Manager */
 switch (dio_cap)
  {
     case DIO_DATA_SER:
         capability = DTI_CPBLTY_SER;
         break;
     case DIO_DATA_MUX:
         capability = DTI_CPBLTY_SER;
         break;
     case DIO_DATA_PKT:
         capability = DTI_CPBLTY_PKT;
         break;
  }
  dti_capability = capability;
  ret_val1 = dti_cntrl_new_device ( src_id,   /* ATI source ID */
                         DTI_ENTITY_PSI,         /* device ID  */
                         (UBYTE)(psi_indic_msg->devId&DIO_DEVICE_MASK), /* device number  */ 
                         UART_DLCI_NOT_MULTIPLEXED,/* sub-channel number */
                         DTI_PORT_NUMBER_NOTPRESENT,/* ATI-RIV port number */
                         (UBYTE)(dti_capability|DTI_CPBLTY_CMD),/* capability */
                         (UBYTE)((psi_indic_msg->devId&DIO_DRV_MASK)>>24),/* driver id */
                         (UBYTE)((psi_indic_msg->devId&ACI_DIO_ID_MASK)>>8)); /* dio id */

  if((psi_indic_msg->psi_data_mode EQ DRIVER_MODE_AT) OR
     (psi_indic_msg->psi_data_mode EQ DRIVER_MODE_AT_DATA))
  {

    ret_val2 = dti_cntrl_est_dpath_indirect ( src_id,
                                              entity_list,
                                              1,
                                              SPLIT,
                                              atiPSI_dti_cb,
                            /*dti_capability*/DTI_CPBLTY_CMD,
                                              DTI_CID_NOTPRESENT);
  }
  else
  {
    ret_val2 = TRUE;
  }
  if ((ret_val1 EQ TRUE) AND (ret_val2 EQ TRUE))
  {
    psaPSI_ConnRes ( psi_indic_msg->devId);
  }
  else
  {
    TRACE_EVENT ("ERROR: DTI MANAGER CAN NOT REGISTER DEVICE OR SET UP DTI CONNECTION");
  }
#else
    TRACE_EVENT ("ERROR: DTI MANAGER NOT ENABLED");
#endif /* DTI */
}

/*
+--------------------------------------------------------------------+
| PROJECT : GPRS (8441)                     MODULE  : CMH_PSI        |
| STATE   : finished                    ROUTINE : cmhPSI_DTI_OpenCnf |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL void cmhPSI_DTI_OpenCnf (U32 devId, U32 link_id, T_DTI_CONN_RESULT result)
{
#ifdef DTI
  UBYTE device_no;
  
  TRACE_FUNCTION ("cmhPSI_DTI_OpenCnf()");
   
  device_no = (UBYTE)(devId & DIO_DEVICE_MASK); 

  dti_cntrl_entity_connected( link_id, DTI_ENTITY_PSI, result);
#endif /* DTI */
}

/*
+--------------------------------------------------------------------+
| PROJECT :                             MODULE  : CMH_PSI            |
| STATE   : finished                    ROUTINE : cmhPSI_DTI_Close   |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL void cmhPSI_DTI_Close (U32 devId, T_PSI_DTI_CLS_TYP  state, U32 link_id)
{
#ifdef DTI
  UBYTE cid = INVALID_CID;

  TRACE_FUNCTION ("cmhPSI_Close()");

  cid = gaci_get_cid_over_link_id(link_id);  
  
  switch(state)
  {
    case PSI_DTI_CLS_CNF:
      /*DTI connection has been closed*/
      dti_cntrl_entity_disconnected(link_id, DTI_ENTITY_PSI);
      break;

    case PSI_DTI_CLS_IND:
      /*dti_cntrl_close_dpath_from_dti_id(EXTRACT_DTI_ID(link_id));*/
      dti_cntrl_entity_disconnected(link_id, DTI_ENTITY_PSI);
      break;

    default:
      break;
  }

  if( INVALID_CID NEQ cid)
  {
    /* Make sure the context gets de-activated in any case */
    cmhSM_deactivateAContext(CMD_SRC_NONE, cid);

    gaci_RAT_caller(RAT_NO_CARRIER, cid, AT_CMD_CGDATA, CME_ERR_Unknown);
  }

#endif /* DTI */
}

#endif /*FF_PSI*/
/*==== EOF ========================================================*/