view src/aci2/alr/alr_csf.c @ 685:3fb7384e820d

tpudrv12.h: FCDEV3B goes back to being itself A while back we had the idea of a FreeCalypso modem family whereby our current fcdev3b target would some day morph into fcmodem, with multiple FC modem family products, potentially either triband or quadband, being firmware-compatible with each other and with our original FCDEV3B. But in light of the discovery of Tango modules that earlier idea is now being withdrawn: instead the already existing Tango hw is being adopted into our FreeCalypso family. Tango cannot be firmware-compatible with triband OM/FCDEV3B targets because the original quadband RFFE on Tango modules is wired in TI's original Leonardo arrangement. Because this Leonardo/Tango way is now becoming the official FreeCalypso way of driving quadband RFFEs thanks to the adoption of Tango into our FC family, our earlier idea of extending FIC's triband RFFE control signals with TSPACT5 no longer makes much sense - we will probably never produce any new hardware with that once-proposed arrangement. Therefore, that triband-or-quadband FCFAM provision is being removed from the code base, and FCDEV3B goes back to being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control purposes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 24 Sep 2020 21:03:08 +0000
parents 5e39123540e6
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-PS
|  Modul   :  alr_CSF
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This Modul defines the customer specific functions.
+-----------------------------------------------------------------------------
*/

#ifndef ALR_CSF_C
#define ALR_CSF_C

#define ENTITY_PL

/*==== INCLUDES ===================================================*/
#include <string.h>
#include <stdlib.h>
#include <ctype.h>
#include "typedefs.h"
#include "pconst.cdg"
#include "mconst.cdg"
#include "message.h"
#include "ccdapi.h"
#include "vsi.h"
#include "custom.h"
#include "gsm.h"
#include "prim.h"
#include "cnf_alr.h"
#include "mon_alr.h"
#include "pei.h"
#include "tok.h"

#include "pcm.h"
#ifdef GPRS
#include "alr_gprs.h"
#endif

#ifdef _TMS470
#include "inth/iq.h"
#include "armio/armio.h"
#endif  /* _TMS470 */

#include "alr.h"


/*==== IMPORT =====================================================*/

/*==== EXPORT =====================================================*/

/*==== PRIVAT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (8403)       MODULE  : alr_CSF                    |
| STATE   : code                ROUTINE : csf_show_version           |
+--------------------------------------------------------------------+

  PURPOSE : Trace Layer 1 DSP version numbers

*/

GLOBAL const void csf_show_version (T_TST_TEST_HW_CON  *ver)
{
#if defined (_TMS470)
  USHORT build, hw, jtag, rev;

  /*
   * Retrieve hardware info and build from library
   */
  hw = 0;

  build = IQ_GetBuild();
  jtag  = IQ_GetJtagId();
  rev   = IQ_GetRevision();

  TRACE_EVENT_P4 ("Build=%04d HW ver=%04X, jtag=%04X, rev=%04X", build, hw, jtag, rev);

  if (ver)
  {
    /*
     * Retrieve Layer 1 info from primitive
     */
    TRACE_EVENT_P3 ("DSP version/patch=%04X, %04x, chksum=%04X",
                    ver->dsp_code_version,
                    ver->dsp_patch_version,
                    ver->dsp_checksum);
    TRACE_EVENT_P3 ("MCU version ALR=%04X, GPRS=%04X, TM=%04X",
                    ver->mcu_alr_version,
                    ver->mcu_gprs_version,
                    ver->mcu_tm_version);
    PFREE (ver);
  }
#else  /* _TMS470  */
  if (ver)
  {
    PFREE (ver);
  }
#endif  /* _TMS470 */
}

#if !defined NTRACE
/*
 * The following monitor capabilities are used by the Condat RT system.
 * They are only included in the trace version of protocol stack.
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)       MODULE  : alr_CSF                    |
| STATE   : code                ROUTINE : trc_mon_counter_idle       |
+--------------------------------------------------------------------+

  PURPOSE : traces the downlink counter values in idle mode if a change
            occur.

*/

UBYTE v_mon_counter_idle = 0;

GLOBAL void trc_mon_counter_idle (UBYTE act_dlt, UBYTE max_dlt)
{
  if (v_mon_counter_idle)
  {
    /*
     * only if monitoring is enabled
     */
    PALLOC (mon_counter_idle, MON_COUNTER_IDLE_IND);

    mon_counter_idle->act_dlt = act_dlt;
    mon_counter_idle->max_dlt = max_dlt;

    PSENDX(RR, mon_counter_idle);
  }
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)       MODULE  : alr_CSF                    |
| STATE   : code                ROUTINE : trc_mon_counter_dedi       |
+--------------------------------------------------------------------+

  PURPOSE : traces the radiolink counter values in dedicated mode
            if a change occur.

*/

UBYTE v_mon_counter_dedi = 0;

GLOBAL void trc_mon_counter_dedi (UBYTE act_rlt, UBYTE max_rlt)
{
  if (v_mon_counter_dedi)
  {
    /*
     * only if monitoring is enabled
     */
    PALLOC (mon_counter_dedi, MON_COUNTER_DEDI_IND);

    mon_counter_dedi->act_rlt = act_rlt;
    mon_counter_dedi->max_rlt = max_rlt;

    PSENDX(RR, mon_counter_dedi);
  }
}

#endif /* !NTRACE */

/*
 * Function added in FreeCalypso to support Openmoko's AT@BAND command
 * without making ACI include ALR header files.
 */

GLOBAL void alr_get_band_of_serving_cell (char *strbuf)
{
    switch(alr_data->sc_band)
    {
    case BAND_GSM_900:
      strcpy(strbuf, "GSM 900");
      break;
    case BAND_DCS_1800:
      strcpy(strbuf, "DCS 1800");
      break;
    case BAND_PCS_1900:
      strcpy(strbuf, "PCS 1900");
      break;
    case BAND_E_GSM:
      strcpy(strbuf, "EGSM");
      break;
    case BAND_GSM_850:
      strcpy(strbuf, "GSM 850");
      break;
    default:
      strcpy(strbuf, "Unknown");
    }
}

#endif