FreeCalypso > hg > fc-magnetite
view src/cs/layer1/include/l1_ctl.h @ 685:3fb7384e820d
tpudrv12.h: FCDEV3B goes back to being itself
A while back we had the idea of a FreeCalypso modem family whereby our
current fcdev3b target would some day morph into fcmodem, with multiple
FC modem family products, potentially either triband or quadband, being
firmware-compatible with each other and with our original FCDEV3B. But
in light of the discovery of Tango modules that earlier idea is now being
withdrawn: instead the already existing Tango hw is being adopted into
our FreeCalypso family.
Tango cannot be firmware-compatible with triband OM/FCDEV3B targets
because the original quadband RFFE on Tango modules is wired in TI's
original Leonardo arrangement. Because this Leonardo/Tango way is now
becoming the official FreeCalypso way of driving quadband RFFEs thanks
to the adoption of Tango into our FC family, our earlier idea of
extending FIC's triband RFFE control signals with TSPACT5 no longer makes
much sense - we will probably never produce any new hardware with that
once-proposed arrangement. Therefore, that triband-or-quadband FCFAM
provision is being removed from the code base, and FCDEV3B goes back to
being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control
purposes.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 24 Sep 2020 21:03:08 +0000 |
parents | 50a15a54801e |
children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1_CTL.H * * Filename l1_ctl.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ /************************************/ /* Automatic timing control (TOA) */ /************************************/ #define C_RED 1 // Factor used to reduce the maximum accumulated values. // Default : 1/2 #define C_GEW 1 // Weighting factor. Default : 1/2 #define C_SNRGR 2560 // 2.5 F6.10 #define C_SNR_THR 8192 // 8 F6.10 #define TOA_HISTO_LEN 11 // Histogram length /* * FreeCalypso Frankenstein: the following definition has been added * from LoCosto version of this file, as it is used by l1_cmplx.c * fairly extensively. * * Disassembly-matching reconstruction has revealed that the constant * in question was originally 210 in the TCS211 version, and then * increased to 220 in the LoCosto source. We currently seek to match * TCS211 without any changes, hence we are setting it back to 210. */ #define IL_FOR_RXLEV_SNR 210 // RX POWER LEVEL /************************************/ /* Automatic Gain Control (AGC) */ /************************************/ #define INDEX_MIN 0 #define INDEX_MAX 240 // 120 /************************************/ /* Automatic frequency compensation */ /************************************/ #define C_thr_snr 2560 // 1/0.4 * 2**10 #define C_thr_P 524288L // 0.5 * 2**20 #define C_cov_start 838861L // 0.8 * 2**20 #define C_a0_kalman 10486L // 0.01 * 2**20 #define C_g_kalman 53687091L// 0.05 * 2**30 #define C_N_del 2 // delay of frequency control loop // due to C W R pipeline #define C_Q 3L // 0.000003 * 2**20 #define C_thr_K 209715L // 0.2 * 2**20 #define C_thr_phi 328 // 0.01 * 2**15 #if (VCXO_ALGO == 1) #define C_WIN_AVG_SIZE_M 64 // average size M #define C_PSI_AVG_SIZE_D 32 // distance size D #define C_MSIZE (C_WIN_AVG_SIZE_M * C_PSI_AVG_SIZE_D) // Data history for predictor #define C_RGAP_BAD_SNR_COUNT_B 32 // bad SNR count B #define ALGO_AFC_RXGAP 1 // reception gap algo #define ALGO_AFC_KALMAN 1 // Kalman filter #define ALGO_AFC_LQG_PREDICTOR 2 // LQG filter + rgap predictor #define ALGO_AFC_KALMAN_PREDICTOR 3 // Kalman filter + rgap predictor #endif #if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3)) // clipping related to AFC DAC linearity range #define C_max_step 32000 // 4000 * 2**3 #define C_min_step -32000 // -4000 * 2**3 #endif