FreeCalypso > hg > fc-magnetite
view src/cs/layer1/include/l1_rtt_macro.h @ 685:3fb7384e820d
tpudrv12.h: FCDEV3B goes back to being itself
A while back we had the idea of a FreeCalypso modem family whereby our
current fcdev3b target would some day morph into fcmodem, with multiple
FC modem family products, potentially either triband or quadband, being
firmware-compatible with each other and with our original FCDEV3B. But
in light of the discovery of Tango modules that earlier idea is now being
withdrawn: instead the already existing Tango hw is being adopted into
our FreeCalypso family.
Tango cannot be firmware-compatible with triband OM/FCDEV3B targets
because the original quadband RFFE on Tango modules is wired in TI's
original Leonardo arrangement. Because this Leonardo/Tango way is now
becoming the official FreeCalypso way of driving quadband RFFEs thanks
to the adoption of Tango into our FC family, our earlier idea of
extending FIC's triband RFFE control signals with TSPACT5 no longer makes
much sense - we will probably never produce any new hardware with that
once-proposed arrangement. Therefore, that triband-or-quadband FCFAM
provision is being removed from the code base, and FCDEV3B goes back to
being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control
purposes.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 24 Sep 2020 21:03:08 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1_RTT_MACRO.H * * Filename %M% * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #if (defined RVM_RTT_SWE || (OP_L1_STANDALONE == 1)) #include "rvt_gen.h" #include "rtt_gen.h" extern T_TRACE_INFO_STRUCT trace_info; /***********************************************************************************************************/ /* Macro for cell enabling checking */ /***********************************************************************************************************/ #define SELECTED_BITMAP(enable_bit) \ enable_bit < 32 ? (0x0001 << (enable_bit - 0)) & trace_info.current_config->rttl1_cell_enable[0] : \ enable_bit < 64 ? (0x0001 << (enable_bit - 32)) & trace_info.current_config->rttl1_cell_enable[1] : \ enable_bit < 96 ? (0x0001 << (enable_bit - 64)) & trace_info.current_config->rttl1_cell_enable[2] : \ enable_bit < 128 ? (0x0001 << (enable_bit - 96)) & trace_info.current_config->rttl1_cell_enable[3] : \ enable_bit < 160 ? (0x0001 << (enable_bit - 128)) & trace_info.current_config->rttl1_cell_enable[4] : \ enable_bit < 192 ? (0x0001 << (enable_bit - 160)) & trace_info.current_config->rttl1_cell_enable[5] : \ enable_bit < 224 ? (0x0001 << (enable_bit - 192)) & trace_info.current_config->rttl1_cell_enable[6] : \ (0x0001 << (enable_bit - 224)) & trace_info.current_config->rttl1_cell_enable[7] /***********************************************************************************************************/ /* Macros for buffer filling */ /***********************************************************************************************************/ //----------------------------------------------------------------------------------------------------------- // L1 RTT cell filling: FN #define RTTL1_FILL_FN(param1) \ if(SELECTED_BITMAP(RTTL1_ENABLE_FN)) \ { \ T_RTT_PTR ptr; \ \ if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_FN))) != NULL) \ { \ ((T_RTTL1_FN *)ptr)->fn = param1; \ ((T_RTTL1_FN *)ptr)->cell_id = RTTL1_ENABLE_FN; \ } \ } //----------------------------------------------------------------------------------------------------------- // L1 RTT cell filling: Downlink burst #define RTTL1_FILL_DL_BURST(param1,param2,param3,param4,param5,param6,param7) \ if(SELECTED_BITMAP(RTTL1_ENABLE_DL_BURST)) \ { \ T_RTT_PTR ptr; \ \ if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_BURST))) != NULL) \ { \ ((T_RTTL1_DL_BURST *)ptr)->angle = param1; \ ((T_RTTL1_DL_BURST *)ptr)->snr = param2; \ ((T_RTTL1_DL_BURST *)ptr)->afc = param3; \ ((T_RTTL1_DL_BURST *)ptr)->task = param4; \ ((T_RTTL1_DL_BURST *)ptr)->pm = param5; \ ((T_RTTL1_DL_BURST *)ptr)->toa = param6; \ ((T_RTTL1_DL_BURST *)ptr)->input_level = param7; \ ((T_RTTL1_DL_BURST *)ptr)->cell_id = RTTL1_ENABLE_DL_BURST; \ } \ } //----------------------------------------------------------------------------------------------------------- // L1 RTT cell filling: Uplink Normal Burst #define RTTL1_FILL_UL_NB(param1, param2, param3) \ if(SELECTED_BITMAP(RTTL1_ENABLE_UL_NB)) \ { \ T_RTT_PTR ptr; \ \ if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_NB))) != NULL) \ { \ ((T_RTTL1_UL_NB *)ptr)->task = param1; \ ((T_RTTL1_UL_NB *)ptr)->ta = param2; \ ((T_RTTL1_UL_NB *)ptr)->txpwr = param3; \ ((T_RTTL1_UL_NB *)ptr)->cell_id = RTTL1_ENABLE_UL_NB; \ } \ } //----------------------------------------------------------------------------------------------------------- // L1 RTT cell filling: Uplink Access Burst #define RTTL1_FILL_UL_AB(param1, param2) \ if(SELECTED_BITMAP(RTTL1_ENABLE_UL_AB)) \ { \ T_RTT_PTR ptr; \ \ if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_AB))) != NULL) \ { \ ((T_RTTL1_UL_AB *)ptr)->task = param1; \ ((T_RTTL1_UL_AB *)ptr)->txpwr = param2; \ ((T_RTTL1_UL_AB *)ptr)->cell_id = RTTL1_ENABLE_UL_AB; \ } \ } //----------------------------------------------------------------------------------------------------------- // L1 RTT cell filling: Full list measurement #define RTTL1_FILL_FULL_LIST_MEAS(param1, param2, param3, param4) \ if(SELECTED_BITMAP(RTTL1_ENABLE_FULL_LIST_MEAS)) \ { \ T_RTT_PTR ptr; \ \ if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_FULL_LIST_MEAS))) != NULL) \ { \ ((T_RTTL1_FULL_LIST_MEAS *)ptr)->pm = param1; \ ((T_RTTL1_FULL_LIST_MEAS *)ptr)->input_level = param2; \ ((T_RTTL1_FULL_LIST_MEAS *)ptr)->task = param3; \ ((T_RTTL1_FULL_LIST_MEAS *)ptr)->radio_freq = param4; \ ((T_RTTL1_FULL_LIST_MEAS *)ptr)->cell_id = RTTL1_ENABLE_FULL_LIST_MEAS; \ } \ } //----------------------------------------------------------------------------------------------------------- // L1 RTT cell filling: Full list measurement #define RTTL1_FILL_MON_MEAS(param1, param2, param3, param4) \ if(SELECTED_BITMAP(RTTL1_ENABLE_MON_MEAS)) \ { \ T_RTT_PTR ptr; \ \ if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_MON_MEAS))) != NULL) \ { \ ((T_RTTL1_MON_MEAS *)ptr)->pm = param1; \ ((T_RTTL1_MON_MEAS *)ptr)->input_level = param2; \ ((T_RTTL1_MON_MEAS *)ptr)->task = param3; \ ((T_RTTL1_MON_MEAS *)ptr)->radio_freq = param4; \ ((T_RTTL1_MON_MEAS *)ptr)->cell_id = RTTL1_ENABLE_MON_MEAS; \ } \ } //----------------------------------------------------------------------------------------------------------- // L1 RTT cell filling: Downlink DCCH block #define RTTL1_FILL_DL_DCCH(param1, param2) \ if(SELECTED_BITMAP(RTTL1_ENABLE_DL_DCCH)) \ { \ T_RTT_PTR ptr; \ \ if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_DCCH))) != NULL) \ { \ ((T_RTTL1_DL_DCCH *)ptr)->valid_flag = param1; \ ((T_RTTL1_DL_DCCH *)ptr)->physical_info = param2; \ ((T_RTTL1_DL_DCCH *)ptr)->cell_id = RTTL1_ENABLE_DL_DCCH; \ } \ } //----------------------------------------------------------------------------------------------------------- // L1 RTT cell filling: Downlink PTCCH block #define RTTL1_FILL_DL_PTCCH(param1, param2) \ if(SELECTED_BITMAP(RTTL1_ENABLE_DL_PTCCH)) \ { \ T_RTT_PTR ptr; \ \ if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_PTCCH))) != NULL) \ { \ ((T_RTTL1_DL_PTCCH *)ptr)->crc = param1; \ ((T_RTTL1_DL_PTCCH *)ptr)->ordered_ta = param2; \ ((T_RTTL1_DL_PTCCH *)ptr)->cell_id = RTTL1_ENABLE_DL_PTCCH; \ } \ } //----------------------------------------------------------------------------------------------------------- // L1 RTT cell filling: Uplink DCCH block #define RTTL1_FILL_UL_DCCH \ if(SELECTED_BITMAP(RTTL1_ENABLE_UL_DCCH)) \ { \ T_RTT_PTR ptr; \ \ if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_DCCH))) != NULL) \ { \ ((T_RTTL1_UL_DCCH *)ptr)->cell_id = RTTL1_ENABLE_UL_DCCH; \ } \ } //----------------------------------------------------------------------------------------------------------- // L1 RTT cell filling: Uplink SACCH block #define RTTL1_FILL_UL_SACCH(param1, param2, param3) \ if(SELECTED_BITMAP(RTTL1_ENABLE_UL_SACCH)) \ { \ T_RTT_PTR ptr; \ \ if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_SACCH))) != NULL) \ { \ ((T_RTTL1_UL_SACCH *)ptr)->data_present = param1; \ ((T_RTTL1_UL_SACCH *)ptr)->reported_ta = param2; \ ((T_RTTL1_UL_SACCH *)ptr)->reported_txpwr = param3; \ ((T_RTTL1_UL_SACCH *)ptr)->cell_id = RTTL1_ENABLE_UL_SACCH; \ } \ } //----------------------------------------------------------------------------------------------------------- // L1 RTT cell filling: Downlink PDTCH block #define RTTL1_FILL_DL_PDTCH(param1, param2, param3, param4, param5) \ if(SELECTED_BITMAP(RTTL1_ENABLE_DL_PDTCH)) \ { \ T_RTT_PTR ptr; \ \ if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_PDTCH))) != NULL) \ { \ ((T_RTTL1_DL_PDTCH *)ptr)->mac_header = param1; \ ((T_RTTL1_DL_PDTCH *)ptr)->tfi_result = param2; \ ((T_RTTL1_DL_PDTCH *)ptr)->crc = param3; \ ((T_RTTL1_DL_PDTCH *)ptr)->cs_type = param4; \ ((T_RTTL1_DL_PDTCH *)ptr)->timeslot = param5; \ ((T_RTTL1_DL_PDTCH *)ptr)->cell_id = RTTL1_ENABLE_DL_PDTCH; \ } \ } //----------------------------------------------------------------------------------------------------------- // L1 RTT cell filling: Uplink PDTCH block #define RTTL1_FILL_UL_PDTCH(param1, param2, param3) \ if(SELECTED_BITMAP(RTTL1_ENABLE_UL_PDTCH)) \ { \ T_RTT_PTR ptr; \ \ if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_PDTCH))) != NULL) \ { \ ((T_RTTL1_UL_PDTCH *)ptr)->cs_type = param1; \ ((T_RTTL1_UL_PDTCH *)ptr)->data_allowed = param2; \ ((T_RTTL1_UL_PDTCH *)ptr)->timeslot = param3; \ ((T_RTTL1_UL_PDTCH *)ptr)->cell_id = RTTL1_ENABLE_UL_PDTCH; \ } \ } //----------------------------------------------------------------------------------------------------------- // L1 RTT cell filling: MAC-S error #define RTTL1_FILL_MACS_STATUS(param1, param2) \ if(SELECTED_BITMAP(RTTL1_ENABLE_MACS_STATUS)) \ { \ T_RTT_PTR ptr; \ \ if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_MACS_STATUS))) != NULL) \ { \ ((T_RTTL1_MACS_STATUS *)ptr)->status = param1; \ ((T_RTTL1_MACS_STATUS *)ptr)->timeslot = param2; \ ((T_RTTL1_MACS_STATUS *)ptr)->cell_id = RTTL1_ENABLE_MACS_STATUS; \ } \ } //----------------------------------------------------------------------------------------------------------- // L1 RTT cell filling: L1S task enable #define RTTL1_FILL_L1S_TASK_ENABLE(param1, param2) \ if(SELECTED_BITMAP(RTTL1_ENABLE_L1S_TASK_ENABLE)) \ { \ T_RTT_PTR ptr; \ \ if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_L1S_TASK_ENABLE))) != NULL) \ { \ ((T_RTTL1_L1S_TASK_ENABLE *)ptr)->bitmap1 = param1; \ ((T_RTTL1_L1S_TASK_ENABLE *)ptr)->bitmap2 = param2; \ ((T_RTTL1_L1S_TASK_ENABLE *)ptr)->cell_id = RTTL1_ENABLE_L1S_TASK_ENABLE; \ } \ } //----------------------------------------------------------------------------------------------------------- // L1 RTT cell filling: MFTAB trace #define RTTL1_FILL_MFTAB(param1) \ if(SELECTED_BITMAP(RTTL1_ENABLE_MFTAB)) \ { \ T_RTT_PTR ptr; \ \ if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_MFTAB))) != NULL) \ { \ ((T_RTTL1_MFTAB *)ptr)->func = param1; \ ((T_RTTL1_MFTAB *)ptr)->cell_id = RTTL1_ENABLE_MFTAB; \ } \ } /***********************************************************************************************************/ /* Macro for events */ /***********************************************************************************************************/ #define RTTL1_EVENT(id,size) \ if (trace_info.current_config->rttl1_event_enable & (0x1 << id)) \ trace_info.l1s_rtt_func.rtt_dump_buffer(trace_info.l1s_trace_user_id, size); #else // RVM_RTT_SWE || OP_L1_STANDALONE // No RTT: all macros are empty #define SELECTED_BITMAP(enable_bit) (0) #define RTTL1_FILL_FN(param1) #define RTTL1_FILL_DL_BURST(param1,param2,param3,param4,param5,param6,param7) #define RTTL1_FILL_UL_NB(param1, param2, param3) #define RTTL1_FILL_UL_AB(param1, param2) #define RTTL1_FILL_FULL_LIST_MEAS(param1, param2, param3, param4) #define RTTL1_FILL_MON_MEAS(param1, param2, param3, param4) #define RTTL1_FILL_DL_DCCH(param1, param2) #define RTTL1_FILL_DL_PTCCH(param1, param2) #define RTTL1_FILL_UL_DCCH #define RTTL1_FILL_UL_SACCH(param1, param2, param3) #define RTTL1_FILL_DL_PDTCH(param1, param2, param3, param4, param5) #define RTTL1_FILL_UL_PDTCH(param1, param2, param3) #define RTTL1_FILL_MACS_STATUS(param1, param2) #define RTTL1_FILL_L1S_TASK_ENABLE(param1, param2) #define RTTL1_FILL_MFTAB(param1) #define RTTL1_EVENT(id,size) #endif // RVM_RTT_SWE || OP_L1_STANDALONE