FreeCalypso > hg > fc-magnetite
view src/cs/riviera/rvm/rvm_pool_size.h @ 685:3fb7384e820d
tpudrv12.h: FCDEV3B goes back to being itself
A while back we had the idea of a FreeCalypso modem family whereby our
current fcdev3b target would some day morph into fcmodem, with multiple
FC modem family products, potentially either triband or quadband, being
firmware-compatible with each other and with our original FCDEV3B. But
in light of the discovery of Tango modules that earlier idea is now being
withdrawn: instead the already existing Tango hw is being adopted into
our FreeCalypso family.
Tango cannot be firmware-compatible with triband OM/FCDEV3B targets
because the original quadband RFFE on Tango modules is wired in TI's
original Leonardo arrangement. Because this Leonardo/Tango way is now
becoming the official FreeCalypso way of driving quadband RFFEs thanks
to the adoption of Tango into our FC family, our earlier idea of
extending FIC's triband RFFE control signals with TSPACT5 no longer makes
much sense - we will probably never produce any new hardware with that
once-proposed arrangement. Therefore, that triband-or-quadband FCFAM
provision is being removed from the code base, and FCDEV3B goes back to
being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control
purposes.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 24 Sep 2020 21:03:08 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/** * @file rvm_pool_size.h * * Declarations of: * - the memory bank sizes and their watermark * - the SWE stack size * - the pool size needed (generally the sum of memory bank and stack sizes) * * @author Vincent Oberle * @version 0.1 */ /* * History: * * Date Author Modification * ------------------------------------------------------------------- * 07/08/2003 Vincent Oberle Extracted from rvf_pool_size.h * 17/09/2003 Gary Totney Calibrated MB3 for 30 tasks * * * (C) Copyright 2003 by Texas Instruments Incorporated, All Rights Reserved */ #ifndef __RVM_POOL_SIZE_H_ #define __RVM_POOL_SIZE_H_ #ifndef _WINDOWS #include "rv.cfg" // TEST #include "debug.cfg" // TI_PROFILER, TI_NUC_MONITOR #include "board.cfg" // BOARD #include "swconfig.cfg" // GSMLITE #endif /* * RVM SWE; This SWE is of course always enabled. * * Values used in rvm_i.h */ #define RVF_RVM_STACK_SIZE (1500) #if (defined BLUETOOTH) || (TEST==1) || (TI_PROFILER == 1) || (TI_NUC_MONITOR == 1) #define RVF_RVM_MB1_SIZE (13000) #else #if (GSMLITE) #define RVF_RVM_MB1_SIZE (1200) #else #define RVF_RVM_MB1_SIZE (6000) #endif #endif #define RVF_RVM_MB2_SIZE (700) #if (GSMLITE) #define RVF_RVM_MB3_SIZE (3200) #define RVF_RVM_MB4_SIZE (0) #define RVF_RVM_MB5_SIZE (0) #define RVF_RVM_COMPENSATOR_POOL_SIZE (1000) #else #define RVF_RVM_MB3_SIZE (9000) #define RVF_RVM_MB4_SIZE (3000) #define RVF_RVM_MB5_SIZE (3000) #define RVF_RVM_COMPENSATOR_POOL_SIZE (12500+3000) #endif #define RVF_RVM_POOL_SIZE (RVF_RVM_STACK_SIZE + RVF_RVM_MB1_SIZE + \ RVF_RVM_MB2_SIZE + RVF_RVM_MB3_SIZE + \ RVF_RVM_MB4_SIZE + RVF_RVM_MB5_SIZE +\ RVF_RVM_COMPENSATOR_POOL_SIZE ) #endif /*__RVM_POOL_SIZE_H_*/