FreeCalypso > hg > fc-magnetite
view src/cs/services/dar/dar_const_i.h @ 685:3fb7384e820d
tpudrv12.h: FCDEV3B goes back to being itself
A while back we had the idea of a FreeCalypso modem family whereby our
current fcdev3b target would some day morph into fcmodem, with multiple
FC modem family products, potentially either triband or quadband, being
firmware-compatible with each other and with our original FCDEV3B. But
in light of the discovery of Tango modules that earlier idea is now being
withdrawn: instead the already existing Tango hw is being adopted into
our FreeCalypso family.
Tango cannot be firmware-compatible with triband OM/FCDEV3B targets
because the original quadband RFFE on Tango modules is wired in TI's
original Leonardo arrangement. Because this Leonardo/Tango way is now
becoming the official FreeCalypso way of driving quadband RFFEs thanks
to the adoption of Tango into our FC family, our earlier idea of
extending FIC's triband RFFE control signals with TSPACT5 no longer makes
much sense - we will probably never produce any new hardware with that
once-proposed arrangement. Therefore, that triband-or-quadband FCFAM
provision is being removed from the code base, and FCDEV3B goes back to
being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control
purposes.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 24 Sep 2020 21:03:08 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/****************************************************************************/ /* */ /* File Name: dar_const_i.h */ /* */ /* Purpose: Internal constants used by DAR instance */ /* */ /* */ /* Version 0.1 */ /* */ /* Date Modification */ /* ------------------------------------ */ /* 26 Septembre 2001 Create */ /* */ /* Author Stephanie Gerthoux */ /* */ /* */ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/ /****************************************************************************/ #include "rv/rv_defined_swe.h" #ifdef RVM_DAR_SWE #ifndef __DAR_CONST_I_H_ #define __DAR_CONST_I_H_ #include "config/chipset.cfg" #ifdef __cplusplus extern "C" { #endif /* Define a mask used to identify the events */ #define DAR_EVENT_EXTERN (0x0C00) #define DAR_EVENT_INTERN (0x0300) /* The DAR task run without any time out */ #define DAR_NOT_TIME_OUT (0) /* The DAR entity processes only the messages send to the following mail box */ #define DAR_MBOX (RVF_TASK_MBOX_0) /* The DAR entity takes into account only the following events: */ #define DAR_TASK_MBOX_EVT_MASK (RVF_TASK_MBOX_0_EVT_MASK) /* The DAR entity waits all event type */ #define DAR_ALL_EVENT_FLAGS (0xFFFF) /* The DAR use max group elements used */ #define DAR_MAX_GROUP_NB (4) /* RAM max buffer size */ #define DAR_MAX_BUFFER_SIZE (3000) /* Recovery data max buffer size */ #define DAR_RECOVERY_DATA_MAX_BUFFER_SIZE (50) /* Dar invalid value */ #define DAR_INVALID_VALUE (0xFFFF) /* Dar initialization */ #define DAR_INITIALIZATION_VALUE (0x0000) /* Define the Watchdog timer register mode */ #define WATCHDOG_TIM_MODE (0xFFFFF804) #if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11)) /* Define the Debug Unit register mode */ #define DAR_DEBUG_UNIT_REGISTER (0x03C00000) #elif (CHIPSET == 12) /* Define the Debug Unit register mode */ #define DAR_DEBUG_UNIT_REGISTER (0x09F00000) #endif /* Mask to enable the Debug Unit Module */ #define ENABLE_DU_MASK (0xF7FF) /* Mask to disable the Debug Unit Module */ #define DISABLE_DU_MASK (0x0800) /* Extra Control register CONF Adress */ #define DAR_DU_EXTRA_CONTROL_REG (0xFFFFFB10) /* Define the size of the Debug Unit register */ /* This size is 64 words of 32 bits = 64*4 bytes */ /* Size in bytes */ #define DEBUG_UNIT_BYTES_SIZE (256) /* Define the size in words */ #define DEBUG_UNIT_WORD_SIZE (64) /* Define the size of the X_dump _buffer */ /* This size is specified in the gsm_cs_amd4_lj3_test.cmd (in "system" directory) */ /* Its size is 38*32 bits = 38*4 bytes = 152 bytes */ #define DAR_X_DUMP_BUFFER_SIZE (152) /* Define the exceptions */ #define DAR_NO_ABORT_EXCEPTION (0) #define DAR_EXCEPTION_DATA_ABORT (1) #define DAR_EXCEPTION_PREFETCH_ABORT (2) #define DAR_EXCEPTION_UNDEFINED (3) #define DAR_EXCEPTION_SWI (4) #define DAR_EXCEPTION_RESERVED (5) #ifdef __cplusplus } #endif #endif /* __DAR_CONST_I_H_ */ #endif /* #ifdef RVM_DAR_SWE */