FreeCalypso > hg > fc-magnetite

view src/cs/system/bootloader/inc/serial.h @ 685:3fb7384e820d

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
tpudrv12.h: FCDEV3B goes back to being itself A while back we had the idea of a FreeCalypso modem family whereby our current fcdev3b target would some day morph into fcmodem, with multiple FC modem family products, potentially either triband or quadband, being firmware-compatible with each other and with our original FCDEV3B. But in light of the discovery of Tango modules that earlier idea is now being withdrawn: instead the already existing Tango hw is being adopted into our FreeCalypso family. Tango cannot be firmware-compatible with triband OM/FCDEV3B targets because the original quadband RFFE on Tango modules is wired in TI's original Leonardo arrangement. Because this Leonardo/Tango way is now becoming the official FreeCalypso way of driving quadband RFFEs thanks to the adoption of Tango into our FC family, our earlier idea of extending FIC's triband RFFE control signals with TSPACT5 no longer makes much sense - we will probably never produce any new hardware with that once-proposed arrangement. Therefore, that triband-or-quadband FCFAM provision is being removed from the code base, and FCDEV3B goes back to being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control purposes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 24 Sep 2020 21:03:08 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/*******************************************************************************
 *
 * SERIAL.H
 *
 * This module contains functions to send or receive commands on the USART 8251.
 * Only polled mode is used.
 * 
 * (C) Texas Instruments 1998
 *
 ******************************************************************************/

#ifndef __SERIAL_H__
#define __SERIAL_H__

#include "main/sys_types.h"

/*
 * ser_receive_command and ser_receive_char have 2 modes:
 *      SER_INFINITE : Waits until a command is received.
 *      SER_IMMEDIATE: Returns imediately even if no character is received.
 */

enum {
    SER_INFINITE,
    SER_IMMEDIATE
};

/*
 * Return values of ser_receive_data_for_flash.
 */

enum {
    SER_DATA_READY,
    SER_DATA_ERROR,
    SER_END_OF_FILE
};

extern void ser_wait_no_activity (SYS_UWORD8 device_id);
extern long ser_send_command (SYS_UWORD8 *command, SYS_UWORD8 device_id);
extern SYS_UWORD8 ser_receive_command (SYS_UWORD8 *command, int mode);
extern long ser_receive_data_for_flash (SYS_UWORD32 *address, SYS_UWORD16 *data, SYS_UWORD8 device_id);
extern void ser_initialize_flash_data_detection (void);
extern void ser_initialize_serial_link (void);
extern void ser_wait_last_character_sent (SYS_UWORD8 device_id);

#endif /* __SERIAL_H__ */