FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/psa_ipas.c @ 685:3fb7384e820d
tpudrv12.h: FCDEV3B goes back to being itself
A while back we had the idea of a FreeCalypso modem family whereby our
current fcdev3b target would some day morph into fcmodem, with multiple
FC modem family products, potentially either triband or quadband, being
firmware-compatible with each other and with our original FCDEV3B. But
in light of the discovery of Tango modules that earlier idea is now being
withdrawn: instead the already existing Tango hw is being adopted into
our FreeCalypso family.
Tango cannot be firmware-compatible with triband OM/FCDEV3B targets
because the original quadband RFFE on Tango modules is wired in TI's
original Leonardo arrangement. Because this Leonardo/Tango way is now
becoming the official FreeCalypso way of driving quadband RFFEs thanks
to the adoption of Tango into our FC family, our earlier idea of
extending FIC's triband RFFE control signals with TSPACT5 no longer makes
much sense - we will probably never produce any new hardware with that
once-proposed arrangement. Therefore, that triband-or-quadband FCFAM
provision is being removed from the code base, and FCDEV3B goes back to
being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control
purposes.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 24 Sep 2020 21:03:08 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : PSA_IPAS +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : +----------------------------------------------------------------------------- */ #if defined (FF_WAP) || defined (FF_SAT_E) #ifndef PSA_IPAS_C #define PSA_IPAS_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "dti.h" /* functionality of the dti library */ #include "aci.h" #include "psa.h" //#include "psa_l2r.h" #include "psa_cc.h" #include "aci_fd.h" #include "cmh.h" #include "dti_conn_mng.h" //#include "cmh_l2r.h" #include "wap_aci.h" #include "psa_tcpip.h" #ifdef GPRS #include "gaci.h" #include "cmh_sm.h" #endif /*==== CONSTANTS ==================================================*/ /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_IPA | | ROUTINE : psaIPA_Config | +-------------------------------------------------------------------+ PURPOSE : Configurate or disconfigurate IPA. */ GLOBAL void psaIPA_Config(ULONG ip, USHORT max_trans_unit, T_ACI_IPA_DIRC dirc /*T_ACI_AT_CMD at_cmd */) { /* dirc = IPA_CONN if IPA is to be activated dirc = IPA_DSC if IPA i to be deactivated */ TRACE_FUNCTION("psaIPA_Config()") ; switch( dirc ) { case ( IPA_CONN ): wap_state = IPA_Configuration; { PALLOC(ipa_config_req,IPA_CONFIG_REQ); ipa_config_req -> ip = ip; ipa_config_req->peer_ip = 0; ipa_config_req->cmd = IPA_CONFIG_UP; ipa_config_req -> mtu = max_trans_unit; PSENDX(IP,ipa_config_req); } break; case ( IPA_DSC ): wap_state = IPA_Deconfiguration; { PALLOC(ipa_config_req,IPA_CONFIG_REQ); ipa_config_req -> ip = 0; ipa_config_req->peer_ip = 0; ipa_config_req->cmd = IPA_CONFIG_DOWN; ipa_config_req -> mtu = 0; PSENDX(IP,ipa_config_req); } break; } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_IPAS | | ROUTINE : psaIPA_Dti_Req | +-------------------------------------------------------------------+ PURPOSE : connect IP */ GLOBAL void psaIPA_Dti_Req(ULONG link_id, UBYTE peer_to_connect_to, UBYTE dti_conn) { PALLOC( ipa_dti_req, IPA_DTI_REQ); #ifdef GPRS T_PDP_CONTEXT_INTERNAL *p_pdp_context_node = NULL; p_pdp_context_node = pdp_context_find_node_from_cid( work_cids[cid_pointer]); if( p_pdp_context_node ) { p_pdp_context_node->internal_data.link_id = link_id; } /* This is probably not the right place to populate the link id since IPA dti req might be sent for CSD call as well ! Need to investigate as separate issue. */ #endif /* GPRS */ TRACE_FUNCTION("psaIPA_Dti_Req"); ipa_dti_req -> dti_conn = dti_conn; ipa_dti_req -> link_id = link_id; if (dti_conn EQ IPA_CONNECT_DTI) { switch( peer_to_connect_to ) { case( DTI_ENTITY_UDP ): ipa_dti_req -> dti_direction = DTI_CHANNEL_TO_HIGHER_LAYER; strcpy((char*)ipa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_UDP].name); break; #ifdef GPRS case( DTI_ENTITY_SNDCP ): ipa_dti_req -> dti_direction = DTI_CHANNEL_TO_LOWER_LAYER; strcpy((char*)ipa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_SNDCP].name); break; #endif case( DTI_ENTITY_PPPC ): ipa_dti_req -> dti_direction = DTI_CHANNEL_TO_LOWER_LAYER; strcpy((char*)ipa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_PPPC].name); break; default: TRACE_EVENT("unknown conn_peer_Id: IPA_DTI_REQ not sent"); PFREE(ipa_dti_req); return; } } PSENDX( IP, ipa_dti_req ); } #endif /* WAP || SAT E */