FreeCalypso > hg > fc-magnetite
view src/gpf3/ccd/hl_flag.c @ 685:3fb7384e820d
tpudrv12.h: FCDEV3B goes back to being itself
A while back we had the idea of a FreeCalypso modem family whereby our
current fcdev3b target would some day morph into fcmodem, with multiple
FC modem family products, potentially either triband or quadband, being
firmware-compatible with each other and with our original FCDEV3B. But
in light of the discovery of Tango modules that earlier idea is now being
withdrawn: instead the already existing Tango hw is being adopted into
our FreeCalypso family.
Tango cannot be firmware-compatible with triband OM/FCDEV3B targets
because the original quadband RFFE on Tango modules is wired in TI's
original Leonardo arrangement. Because this Leonardo/Tango way is now
becoming the official FreeCalypso way of driving quadband RFFEs thanks
to the adoption of Tango into our FC family, our earlier idea of
extending FIC's triband RFFE control signals with TSPACT5 no longer makes
much sense - we will probably never produce any new hardware with that
once-proposed arrangement. Therefore, that triband-or-quadband FCFAM
provision is being removed from the code base, and FCDEV3B goes back to
being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control
purposes.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 24 Sep 2020 21:03:08 +0000 |
parents | c41a534f33c6 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : hl_flag.c +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Inc. | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definition of encoding and decoding functions for HL_FLAG elements +----------------------------------------------------------------------------- */ /* * standard definitions like GLOBAL, UCHAR, ERROR etc. */ #include "typedefs.h" #include "header.h" /* * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only * look at ccdapi.h */ #undef USE_DRIVER #include "ccdapi.h" /* * Types and functions for bit access and manipulation */ #include "ccd_globs.h" #include "bitfun.h" /* * Prototypes of ccd internal functions */ #include "ccd.h" /* * Declaration of coder/decoder tables */ #include "ccdtable.h" #include "ccddata.h" #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : CCD (6144) MODULE : CDC_GSM | | STATE : code ROUTINE : cdc_hl_flag_decode | +--------------------------------------------------------------------+ PURPOSE : Decoding of the GSM Type HL_FLAG element. This element consists of a single bit only. The decoded value will be 0 if the encoded value is L respectively 1 if the encoded value is H. */ SHORT cdc_hl_flag_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs) { ULONG repeat, max_rep; BOOL is_variable = FALSE; ULONG cix_ref, num_prolog_steps, prolog_step_ref; #ifdef DEBUG_CCD #ifndef CCD_SYMBOLS TRACE_CCD (globs, "cdc_hl_flag_decode()"); #else TRACE_CCD (globs, "cdc_hl_flag_decode() %s", ccddata_get_alias((USHORT) e_ref, 1)); #endif #endif globs->SeekTLVExt = FALSE; cix_ref = melem[e_ref].calcIdxRef; num_prolog_steps = calcidx[cix_ref].numPrologSteps; prolog_step_ref = calcidx[cix_ref].prologStepRef; repeat = 1; if (cix_ref != 0) { /* * if this element is conditional, check the condition */ if (calcidx[cix_ref].numCondCalcs NEQ 0 AND ! ccd_conditionOK (e_ref, globs)) return 1; /* * if this element have a defined Prolog * we have to process it before decoding the bitstream */ if (num_prolog_steps) { ccd_performOperations (num_prolog_steps, prolog_step_ref, globs); } if (melem[e_ref].repType NEQ ' ') { is_variable = ccd_calculateRep (e_ref, &repeat, &max_rep, globs); } } /* * Element is not a SPARE. Setup the struct pointer */ globs->pstructOffs = melem[e_ref].structOffs; if (melem[e_ref].optional) { /* * for optional elements we must set the valid-flag * ??. * Therefore we store the address of the valid flag. */ *(globs->pstruct + globs->pstructOffs++) = TRUE; } globs->pstruct[globs->pstructOffs++] = (UBYTE) (bf_readBit(globs) == GET_HL_PREV(1)); #ifdef DEBUG_CCD #ifdef CCD_SYMBOLS TRACE_CCD (globs, "decoding var %s",ccddata_get_alias((USHORT) e_ref, 1)); #else TRACE_CCD (globs, "decoding var %d", melem[e_ref].elemRef); #endif #endif return 1; } #endif /* !RUN_INT_RAM */ #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : CCD (6144) MODULE : CDC_GSM | | STATE : code ROUTINE : cdc_hl_flag_encode | +--------------------------------------------------------------------+ PURPOSE : Encoding of the GSM Type HL_FLAG element. This element consists of a single bit only. If the element is set to 1 a H bit will be coded. Otherwise a L bit will be coded if the element value to encode is set to 0. */ SHORT cdc_hl_flag_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs) { ULONG repeat=1, amount=1; USHORT cSize = 0, startOffset; ULONG i; ULONG cix_ref, num_prolog_steps, prolog_step_ref; #ifdef DEBUG_CCD #ifndef CCD_SYMBOLS TRACE_CCD (globs, "cdc_hl_flag_encode()"); #else TRACE_CCD (globs, "cdc_hl_flag_encode() %s", ccddata_get_alias((USHORT) e_ref, 1)); #endif #endif cix_ref = melem[e_ref].calcIdxRef; num_prolog_steps = calcidx[cix_ref].numPrologSteps; prolog_step_ref = calcidx[cix_ref].prologStepRef; if (cix_ref != 0) { /* * if this element is conditional, check the condition */ if (calcidx[cix_ref].numCondCalcs NEQ 0 AND ! ccd_conditionOK (e_ref, globs)) return 1; /* * if this element have a defined Prolog * we have to process it before decoding the bitstream */ if (num_prolog_steps) { ccd_performOperations (num_prolog_steps, prolog_step_ref, globs); } } if (melem[e_ref].elemType NEQ 'S') { /* * Element is not a SPARE. * Setup the offset into the C-structure for this element */ globs->pstructOffs = melem[e_ref].structOffs; if (melem[e_ref].optional) { /* * for optional elements check the valid-flag in the C-struct. * Spare elements does not have a corresponding valid flag. */ if (globs->pstruct[globs->pstructOffs++] == FALSE) { /* * element is invalid so we must code a 0 bit */ bf_writeBit (GET_HL(0), globs); return 1; } else { #ifdef DEBUG_CCD if (globs->pstruct [melem[e_ref].structOffs] != TRUE) { TRACE_CCD (globs, "Ambiguous value for valid flag!\n...assumed 1 for ccdID=%d", e_ref); } #endif /* * element is valid so we must code a 1 bit */ bf_writeBit (GET_HL(1), globs); } } if (melem[e_ref].repType NEQ ' ') { /* As a default amount =1 due to initialization. */ if (melem[e_ref].repType EQ 'i') { /* * for variable repeatable elements read the amount * of repeats out of the C-Structure (c_xxx). * If the number of repeats given by the C-Structure * exceeds the allowed value CCD gives a warning! */ if (melem[e_ref].maxRepeat > 255) { ULONG count = (ULONG) (* (USHORT *)(globs->pstruct + globs->pstructOffs++)); repeat = MINIMUM (count, (ULONG) melem[e_ref].maxRepeat); if (repeat < count) ccd_recordFault (globs, ERR_MAX_REPEAT, CONTINUE, (USHORT) e_ref, globs->pstruct + globs->pstructOffs); } else { repeat = (ULONG) MINIMUM (globs->pstruct[globs->pstructOffs], melem[e_ref].maxRepeat); if ( repeat < (ULONG)(globs->pstruct[globs->pstructOffs]) ) ccd_recordFault (globs, ERR_MAX_REPEAT, CONTINUE, (USHORT) e_ref, globs->pstruct + globs->pstructOffs); } globs->pstructOffs++; } else if (melem[e_ref].repType EQ 'v') { /* * for variable repeatable elements read the amount * of repeats out of the C-Structure (c_xxx). * If the number of repetitions given by the C-Structure * exceeds the allowed value (maxRepeat) CCD gives a warning! */ if (melem[e_ref].maxRepeat > 255) { ULONG count = (ULONG) (* (USHORT *)(globs->pstruct + globs->pstructOffs++)); amount = MINIMUM (count, (ULONG) melem[e_ref].maxRepeat); if (amount < count) ccd_recordFault (globs, ERR_MAX_REPEAT, CONTINUE, (USHORT) e_ref, globs->pstruct + globs->pstructOffs); } else { amount = (ULONG) MINIMUM (globs->pstruct[globs->pstructOffs], melem[e_ref].maxRepeat); if ( amount < (ULONG) (globs->pstruct[globs->pstructOffs]) ) ccd_recordFault (globs, ERR_MAX_REPEAT, CONTINUE, (USHORT) e_ref, globs->pstruct + globs->pstructOffs); } globs->pstructOffs++; } else if (melem[e_ref].repType EQ 'c') { amount = (ULONG) melem[e_ref].maxRepeat; } if (melem[e_ref].repType EQ 'v' OR melem[e_ref].repType EQ 'i') { cSize = (USHORT)(((melem[e_ref].elemType EQ 'V') ? mvar[melem[e_ref].elemRef].cSize : mcomp[melem[e_ref].elemRef].cSize )); startOffset = (USHORT) globs->pstructOffs; } } for (i=0; i < repeat; i++) { if (cSize) { /* * calculate the offset if it is an array */ globs->pstructOffs = (USHORT)(startOffset + (i * cSize)); } /* * encode the value */ if (globs->pstruct[globs->pstructOffs++] EQ FALSE) { /* * element is 0 so we must signalize L */ bf_writeBit (GET_HL(0), globs); } else { /* * element is 1 so we must signalize H */ bf_writeBit (GET_HL(1), globs); } globs->pstructOffs += mvar[melem[e_ref].elemRef].cSize; } if (melem[e_ref].repType EQ 'i') { /* * for variable CNS1 fields we code a 0 flag to mark the end of the * arrays */ bf_writeBit (GET_HL(0), globs); } } return 1; } #endif /* !RUN_INT_RAM */