+
−The latest official firmware for Openmoko Neo1973 and Neo FreeRunner Calypso
+
−modems is moko13 as of this writing; moko13 is FreeCalypso Magnetite Hg
+
−changeset 286:840113655bbf built for the gtamodem target in the l1reconst
+
−configuration.  There have been many changes in FC Magnetite since then, but
+
−few of them affect the l1reconst config on the gtamodem target in any
+
−noticeable way.  The few noticeable post-moko13 changes which we do have in our
+
−current l1reconst code are not deemed important enough to justify making
+
−another formal release for a no-longer-made hardware platform that no longer
+
−has any real user community either.
+
−
+
−However, we also have the new TCS2/TCS3 hybrid config in which the old version
+
−of the G23M protocol stack from Openmoko (binary libs only, no source) has been
+
−replaced with a newer version from TI's TCS3/LoCosto program, and this new
+
−version is full source.  This hybrid firmware has now reached the state where
+
−it is ready to be exercised by adventurous beta users in real-life usage.
+
−
+
−The new hybrid fw for the gtamodem target can be built as follows:
+
−
+
−./configure.sh gtamodem hybrid
+
−cd build-gtamodem-hybrid; make
+
−
+
−Then after enduring the very slow build, you can flash it with fc-loadtool:
+
−
+
−loadtool> flash erase 0 0x250000
+
−loadtool> flash program-bin 0 fwimage.bin
+
−
+
−If you are brave enough to do the above, please let us know how this new modem
+
−firmware fares when driven by QtMoko or SHR on the AP - it would definitely be
+
−an adventure!  We would be most interested in working with developers or
+
−maintainers of specific AP software components that are directly responsible
+
−for talking AT commands to the modem, if there are any such developers or
+
−maintainers still around.