FreeCalypso > hg > fc-magnetite
view src/aci2/aci/aci_bat_bas.c @ 47:472fba6e92b7
power.lib done
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 30 Sep 2016 20:48:31 +0000 |
parents | 93999a60b835 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : ACI_BAT +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This BAT wrapper modul is ... | +----------------------------------------------------------------------------- */ #include "aci_all.h" /* includes prim.h, which includes p_bat.h */ #include "aci_cmh.h" /* prototypes of sAT_,qAT_,tAT_ */ #include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ #include "aci_bat.h" #include "pwr.h" /* see sBAT_PlusCBC() */ #include "audio.h" /* see sBAT_PlusCLVL(), qBAT_PlusCLVL() */ #include "pcm.h" /* see aciBatPrcsPlusCG() */ LOCAL T_ACI_BAT_RSLT aciBatPrcsPlusCG (UBYTE *rc, USHORT *le, size_t ml, CHAR *ef); /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : BAT_Z | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT BAT_Z (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("BAT_Z()"); ret=(T_ACI_BAT_RSLT)sAT_Z(src_infos_psi->srcId,0); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCPAS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCPAS (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_CPAS_PAS pas; TRACE_FUNCTION ("sBAT_PlusCPAS()"); /* * The ACI has implemented the 'set' operation of +CPAS as a qAT function. */ ret=(T_ACI_BAT_RSLT)qAT_PlusCPAS(src_infos_psi->srcId,&pas); if (ret==ACI_BAT_CMPL) { T_BAT_cmd_response resp; T_BAT_res_set_plus_cpas cpas_data; resp.ctrl_response=BAT_RES_SET_PLUS_CPAS; resp.response.ptr_set_plus_cpas=&cpas_data; /* * This relies on T_BAT_plus_cpas_pas being identical to * T_ACI_CPAS_PAS. They aren't quite the same, the BAT version * doesn't have a 'not present' value, but as the parameter in * question is mandatory this shouldn't be a problem. */ cpas_data.pas=(T_BAT_plus_cpas_pas)pas; aci_bat_send(src_infos_psi,&resp); } return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : BAT_ANDC | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT BAT_ANDC (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_DCD_MOD dcd; TRACE_FUNCTION ("BAT_ANDC()"); /* * This relies on T_BAT_andc_value being identical to * T_ACI_DCD_MOD. */ dcd=(T_ACI_CFUN_FUN)cmd->params.ptr_andc->value; /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)sAT_AndC(src_infos_psi->srcId,dcd); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : BAT_ANDF | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT BAT_ANDF (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("BAT_ANDF()"); /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)sAT_AndF(src_infos_psi->srcId,0); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCSQ | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCSQ (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; UBYTE rssi; UBYTE ber; UBYTE actlevel; TRACE_FUNCTION ("sBAT_PlusCSQ()"); /* * The ACI has implemented the 'set' operation of +CSQ as a qAT function. * There isn't a separate qAT_PlusCSQ() function, so we must use the * 'percent' version and ignore the extra 'actlevel' value returned. */ ret=(T_ACI_BAT_RSLT)qAT_PercentCSQ(src_infos_psi->srcId,&rssi,&ber,&actlevel); if (ret==ACI_BAT_CMPL) { T_BAT_cmd_response resp; T_BAT_res_set_plus_csq csq_data; resp.ctrl_response=BAT_RES_SET_PLUS_CSQ; resp.response.ptr_set_plus_csq=&csq_data; csq_data.rssi=(U8)rssi; csq_data.ber=(U8)ber; aci_bat_send(src_infos_psi,&resp); } return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentCSQ | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentCSQ (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; UBYTE rssi; UBYTE ber; UBYTE actlevel; TRACE_FUNCTION ("qBAT_PercentCSQ()"); /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)qAT_PercentCSQ(src_infos_psi->srcId,&rssi,&ber,&actlevel); if (ret==ACI_BAT_CMPL) { T_BAT_cmd_response resp; T_BAT_res_que_percent_csq csq_data; resp.ctrl_response=BAT_RES_QUE_PERCENT_CSQ; resp.response.ptr_que_percent_csq=&csq_data; csq_data.rssi=(U8)rssi; csq_data.ber=(U8)ber; csq_data.actlevel=(U8)actlevel; aci_bat_send(src_infos_psi,&resp); } return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCBC | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCBC (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { pwr_Status_Type powerStat; T_BAT_cmd_response resp; T_BAT_res_set_plus_cbc cbc_data; TRACE_FUNCTION("sBAT_PlusCBC()"); /* * There is no equivalent ACI function, so we must handle this * within BAT. This code is adapted from the ATI function * atPlusCBC(). */ if (pwr_GetStatus(&powerStat)!=DRV_OK) { ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_Unknown); return(ACI_BAT_FAIL); } resp.ctrl_response=BAT_RES_SET_PLUS_CBC; resp.response.ptr_set_plus_cbc=&cbc_data; switch(powerStat.Status) { case PWR_EXTPOWER_ON: cbc_data.bsc=BAT_CBC_BSC_NOBATTERY; break; case PWR_CHARGER_ON: cbc_data.bsc=BAT_CBC_BSC_BATTERY; break; default: cbc_data.bsc=BAT_CBC_BSC_BATTERYPOWERED; break; } cbc_data.bcl=(T_BAT_plus_cbc_bcl)powerStat.ChargeLevel; aci_bat_send(src_infos_psi,&resp); return(ACI_BAT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCLVL | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCLVL (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { TRACE_FUNCTION ("sBAT_PlusCLVL()"); /* * There is no equivalent ACI function, so we must handle this * within BAT. */ if (audio_SetAmplf(AUDIO_SPEAKER,(UBYTE)cmd->params.ptr_set_plus_clvl->level)!=DRV_OK) { ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_Unknown); return(ACI_BAT_FAIL); } return(ACI_BAT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusCLVL | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusCLVL (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { UBYTE vol; T_BAT_cmd_response resp; T_BAT_res_que_plus_clvl clvl_data; TRACE_FUNCTION ("qBAT_PlusCLVL()"); /* * There is no equivalent ACI function, so we must handle this * within BAT. */ if (audio_GetAmplf(AUDIO_MICROPHONE,&vol)!=DRV_OK) { ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_Unknown); return(ACI_BAT_FAIL); } resp.ctrl_response=BAT_RES_QUE_PLUS_CLVL; resp.response.ptr_que_plus_clvl=&clvl_data; clvl_data.level=(U8)vol; aci_bat_send(src_infos_psi,&resp); return(ACI_BAT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCMUT | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCMUT (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { UBYTE mute; TRACE_FUNCTION ("sBAT_PlusCMUT()"); /* * There is no equivalent ACI function, so we must handle this * within BAT. */ mute=(cmd->params.ptr_set_plus_cmut->n==BAT_CMUT_N_ON) ? AUDIO_MUTING_ON:AUDIO_MUTING_OFF; if(audio_SetMute(AUDIO_MICROPHONE,mute)!=DRV_OK) { ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_Unknown); return(ACI_BAT_FAIL); } return(ACI_BAT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusCMUT | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusCMUT (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { UBYTE mute; T_BAT_cmd_response resp; T_BAT_res_que_plus_cmut cmut_data; TRACE_FUNCTION ("qBAT_PlusCMUT()"); /* * There is no equivalent ACI function, so we must handle this * within BAT. */ if (audio_GetMute(AUDIO_MICROPHONE,&mute)!=DRV_OK) { ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_Unknown); return(ACI_BAT_FAIL); } resp.ctrl_response=BAT_RES_QUE_PLUS_CMUT; resp.response.ptr_que_plus_cmut=&cmut_data; cmut_data.n=(U8)(mute==AUDIO_MUTING_ON) ? BAT_CMUT_N_ON:BAT_CMUT_N_OFF; aci_bat_send(src_infos_psi,&resp); return(ACI_BAT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCSCS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCSCS (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_BAT_plus_cscs_cs cs; TRACE_FUNCTION ("sBAT_PlusCSCS()"); /* * There is no equivalent ACI function, so we must handle this * within BAT. */ cs=cmd->params.ptr_set_plus_cscs->cs; /* * As we are handling this within BAT and not forwarding it to * the ACI we should check the input parameter. */ if ((cs<BAT_CSCS_CS_IRA) || (cs>BAT_CSCS_CS_UCS2)) { ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_Unknown); return(ACI_BAT_FAIL); } aci_bat_cs_set(src_infos_psi,cs); return(ACI_BAT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusCSCS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusCSCS (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_BAT_cmd_response resp; T_BAT_res_que_plus_cscs cscs_data; TRACE_FUNCTION ("qBAT_PlusCSCS()"); /* * There is no equivalent ACI function, so we must handle this * within BAT. */ resp.ctrl_response=BAT_RES_QUE_PLUS_CSCS; resp.response.ptr_que_plus_cscs=&cscs_data; cscs_data.cs=aci_bat_cs_get(src_infos_psi); aci_bat_send(src_infos_psi,&resp); return(ACI_BAT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentCCBS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentCCBS (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; SHORT idx; TRACE_FUNCTION ("sBAT_PercentCCBS()"); idx=(SHORT)cmd->params.ptr_set_percent_ccbs->idx; /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)sAT_PercentCCBS(src_infos_psi->srcId,idx); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentCCBS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentCCBS (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; TRACE_FUNCTION ("qBAT_PercentCCBS()"); ret=(T_ACI_BAT_RSLT)qAT_PercentCCBS(src_infos_psi->srcId); /* * qAT_PercentCCBS() never returns AT_CMPL, so we do not send * the response here. */ return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCMUX | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCMUX (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_set_plus_cmux *cmux; TRACE_FUNCTION ("sBAT_PlusCMUX()"); /* * Get a pointer to the CMUX data for convenience. */ cmux=cmd->params.ptr_set_plus_cmux; /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. Note that we lose * 'k' as it is not in the ACI. */ ret=(T_ACI_BAT_RSLT)sAT_PlusCMUX( src_infos_psi->srcId, (UBYTE)cmux->mode, (UBYTE)cmux->subset, (UBYTE)cmux->port_speed, (USHORT)cmux->n1, (UBYTE)cmux->t1, (UBYTE)cmux->n2, (UBYTE)cmux->t2, (UBYTE)cmux->t3); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusCMUX | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusCMUX (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { TRACE_FUNCTION ("qBAT_PlusCMUX()"); /* * There is no ACI equivalent. */ return(ACI_BAT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusIPR | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusIPR (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_BD_RATE rate; TRACE_FUNCTION ("sBAT_PlusIPR()"); /* * This relies on T_ACI_BD_RATE and T_BAT_plus_ipr_rate being * identical. In fact the BAT has an extra value, but this should * not cause problems as there is a parameter check in * sAT_PlusIPR(). */ rate=(T_ACI_BD_RATE)cmd->params.ptr_set_plus_ipr->rate; /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)sAT_PlusIPR(src_infos_psi->srcId,rate); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusIPR | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusIPR (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_ACI_BD_RATE rate; TRACE_FUNCTION ("qBAT_PlusIPR()"); /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)qAT_PlusIPR(src_infos_psi->srcId,&rate); if (ret==ACI_BAT_CMPL) { T_BAT_cmd_response resp; T_BAT_res_que_plus_ipr ipr_data; resp.ctrl_response=BAT_RES_QUE_PLUS_IPR; resp.response.ptr_que_plus_ipr=&ipr_data; /* * This relies on T_ACI_BD_RATE and T_BAT_plus_ipr_rate being * identical. In fact the BAT has an extra value, but that is * irrelevant in this direction. */ ipr_data.rate=(T_BAT_plus_ipr_rate)rate; aci_bat_send(src_infos_psi,&resp); } return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusICF | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusICF (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_BS_FRM format; T_ACI_BS_PAR parity; TRACE_FUNCTION ("sBAT_PlusICF()"); /* * This relies on T_ACI_BS_FRM being identical to T_BAT_framing_format * and T_ACI_BS_PAR being identical to T_BAT_framing_parity. */ format=(T_ACI_BS_FRM)cmd->params.ptr_set_plus_icf->framing_format; parity=(T_ACI_BS_PAR)cmd->params.ptr_set_plus_icf->framing_parity; /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)sAT_PlusICF(src_infos_psi->srcId,format,parity); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusICF | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusICF (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_BS_FRM format; T_ACI_BS_PAR parity; TRACE_FUNCTION ("qBAT_PlusICF()"); /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)qAT_PlusICF(src_infos_psi->srcId,&format,&parity); if (ret==ACI_BAT_CMPL) { T_BAT_cmd_response resp; T_BAT_res_que_plus_icf icf_data; resp.ctrl_response=BAT_RES_QUE_PLUS_ICF; resp.response.ptr_que_plus_icf=&icf_data; /* * This relies on T_ACI_BS_FRM being identical to T_BAT_framing_format * and T_ACI_BS_PAR being identical to T_BAT_framing_parity. */ icf_data.framing_format=(T_BAT_framing_format)format; icf_data.framing_parity=(T_BAT_framing_parity)parity; aci_bat_send(src_infos_psi,&resp); } return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusIFC | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusIFC (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_RX_FLOW_CTRL DCE_by_DTE; T_ACI_RX_FLOW_CTRL DTE_by_DCE; TRACE_FUNCTION ("sBAT_PlusIFC()"); /* * This relies on T_ACI_RX_FLOW_CONTROL being identical to both * T_BAT_plus_ifc_by_te and T_BAT_plus_ifc_by_ta. Note that * sAT_PlusIFC() really does use T_ACI_RX_FLOW_CTRL for both * parameters even though a T_ACI_TX_FLOW_CTRL exists (they are * equivalent anyway). */ DCE_by_DTE=(T_ACI_RX_FLOW_CTRL)cmd->params.ptr_set_plus_ifc->by_te; DTE_by_DCE=(T_ACI_RX_FLOW_CTRL)cmd->params.ptr_set_plus_ifc->by_ta; /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=sAT_PlusIFC(src_infos_psi->srcId,DCE_by_DTE,DTE_by_DCE); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusIFC | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusIFC (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_RX_FLOW_CTRL DCE_by_DTE; T_ACI_RX_FLOW_CTRL DTE_by_DCE; TRACE_FUNCTION ("qBAT_PlusIFC()"); /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)qAT_PlusIFC(src_infos_psi->srcId,&DCE_by_DTE,&DTE_by_DCE); if (ret==ACI_BAT_CMPL) { T_BAT_cmd_response resp; T_BAT_res_que_plus_ifc ifc_data; resp.ctrl_response=BAT_RES_QUE_PLUS_IFC; resp.response.ptr_que_plus_ifc=&ifc_data; /* * This relies on T_ACI_RX_FLOW_CONTROL being identical to both * T_BAT_plus_ifc_by_te and T_BAT_plus_ifc_by_ta. Note that * qAT_PlusIFC() really does use T_ACI_RX_FLOW_CTRL for both * parameters even though a T_ACI_TX_FLOW_CTRL exists (they are * equivalent anyway). */ ifc_data.by_te=(T_BAT_plus_ifc_by_te)DCE_by_DTE; ifc_data.by_ta=(T_BAT_plus_ifc_by_ta)DTE_by_DCE; aci_bat_send(src_infos_psi,&resp); } return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCCLK | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCCLK (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_RTC_DATE date; T_ACI_RTC_TIME time; int time_zone; TRACE_FUNCTION ("sBAT_PlusCCLK()"); date.year=(USHORT)(cmd->params.ptr_set_plus_cclk->year+2000); date.month=(UBYTE)cmd->params.ptr_set_plus_cclk->month; date.day=(UBYTE)cmd->params.ptr_set_plus_cclk->day; time.hour=(UBYTE)cmd->params.ptr_set_plus_cclk->hour; time.minute=(UBYTE)cmd->params.ptr_set_plus_cclk->minutes; time.second=(UBYTE)cmd->params.ptr_set_plus_cclk->seconds; /* * Time format and PM flag are not in the BAT message. Use the same * values that the ATI does in this situation. */ time.format=TIME_FORMAT_24HOUR; time.PM_flag=0; time_zone=(int)cmd->params.ptr_set_plus_cclk->time_zone; /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)sAT_PlusCCLK(src_infos_psi->srcId,&date,&time,time_zone); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusCCLK | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusCCLK (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_RTC_DATE date; T_ACI_RTC_TIME time; int time_zone; TRACE_FUNCTION ("qBAT_PlusCCLK()"); /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)qAT_PlusCCLK(src_infos_psi->srcId,&date,&time,&time_zone); if (ret==ACI_BAT_CMPL) { T_BAT_cmd_response resp; T_BAT_res_que_plus_cclk cclk_data; resp.ctrl_response=BAT_RES_QUE_PLUS_CCLK; resp.response.ptr_que_plus_cclk=&cclk_data; cclk_data.year=(U8)(date.year-2000); cclk_data.month=(U8)date.month; cclk_data.day=(U8)date.day; cclk_data.hour=(U8)time.hour; /* * BAT only handles a 24 hour clock. So if the information arrives * in 12 hour format we must convert it. */ if (time.format==TIME_FORMAT_12HOUR) { if ((time.PM_flag) && (time.hour<12)) cclk_data.hour+=12; else if ((time.PM_flag==0) && (time.hour==12)) cclk_data.hour=0; } cclk_data.minutes=(U8)time.minute; cclk_data.seconds=(U8)time.second; cclk_data.time_zone=(S8)time_zone; aci_bat_send(src_infos_psi,&resp); } return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCGMI | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCGMI(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_BAT_cmd_response resp; T_BAT_res_set_plus_cgmi set_cgmi_buffer; TRACE_FUNCTION ("sBAT_PlusCGMI()"); resp.ctrl_response = BAT_RES_SET_PLUS_CGMI ; resp.response.ptr_set_plus_cgmi = &set_cgmi_buffer; ret = aciBatPrcsPlusCG(resp.response.ptr_set_plus_cgmi->manufacturer, &resp.response.ptr_set_plus_cgmi->c_manufacturer, sizeof(resp.response.ptr_set_plus_cgmi->manufacturer), EF_CGMI_ID); if (ret EQ ACI_BAT_CMPL) { aci_bat_send(src_infos_psi,&resp); } return ret; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCGMM | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCGMM(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_BAT_cmd_response resp; T_BAT_res_set_plus_cgmm set_cgmm_buffer; TRACE_FUNCTION ("sBAT_PlusCGMM()"); resp.ctrl_response = BAT_RES_SET_PLUS_CGMM ; resp.response.ptr_set_plus_cgmm = &set_cgmm_buffer; ret = aciBatPrcsPlusCG(resp.response.ptr_set_plus_cgmm->model, &resp.response.ptr_set_plus_cgmm->c_model, sizeof(resp.response.ptr_set_plus_cgmm->model), EF_CGMM_ID); if (ret EQ ACI_BAT_CMPL) { aci_bat_send(src_infos_psi,&resp); } return ret; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCGMR | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCGMR(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_BAT_cmd_response resp; T_BAT_res_set_plus_cgmr set_cgmr_buffer; TRACE_FUNCTION ("sBAT_PlusCGMR()"); resp.ctrl_response = BAT_RES_SET_PLUS_CGMR ; resp.response.ptr_set_plus_cgmr = &set_cgmr_buffer; ret = aciBatPrcsPlusCG(resp.response.ptr_set_plus_cgmr->revision, &resp.response.ptr_set_plus_cgmr->c_revision, sizeof(resp.response.ptr_set_plus_cgmr->revision), EF_CGMR_ID); if (ret EQ ACI_BAT_CMPL) { aci_bat_send(src_infos_psi,&resp); } return ret; } GLOBAL T_ACI_BAT_RSLT sBAT_PlusCGSN(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_BAT_cmd_response resp; T_BAT_res_set_plus_cgsn set_cgsn_buffer; TRACE_FUNCTION ("sBAT_PlusCGSN()"); resp.ctrl_response = BAT_RES_SET_PLUS_CGSN ; resp.response.ptr_set_plus_cgsn = &set_cgsn_buffer; ret = aciBatPrcsPlusCG(resp.response.ptr_set_plus_cgsn->sn, &resp.response.ptr_set_plus_cgsn->c_sn, sizeof(resp.response.ptr_set_plus_cgsn->sn), EF_CGSN_ID); if (ret EQ ACI_BAT_CMPL) { aci_bat_send(src_infos_psi,&resp); } return ret; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : aciBatPrcsPlusCG | +--------------------------------------------------------------------+ PURPOSE : */ LOCAL T_ACI_BAT_RSLT aciBatPrcsPlusCG (UBYTE *rc, USHORT *le, size_t ml, CHAR *ef) { pcm_FileInfo_Type fileInfo; USHORT i; TRACE_FUNCTION("aciBatPrcsPlusCG()"); if (pcm_GetFileInfo ((UBYTE* )ef, &fileInfo) NEQ DRV_OK) { cmdCmeError (CME_ERR_MemFail); return ACI_BAT_FAIL; } if (fileInfo.FileSize <= ml) { if (pcm_ReadFile ((UBYTE*)ef, fileInfo.FileSize, (UBYTE*)rc, &fileInfo.Version) NEQ DRV_OK) { cmdCmeError (CME_ERR_MemFail); return ACI_BAT_FAIL; } i = 0; while (rc[i] NEQ 0xFF) { i++; } *le = i; return ACI_BAT_CMPL; } else { TRACE_FUNCTION("aciBatPrcsPlusCG(): file size is larger than the defined response length!"); cmdCmeError (CME_ERR_MemFail); return ACI_BAT_FAIL; } }