FreeCalypso > hg > fc-magnetite
view cdg211/cdginc/m_cc.val @ 695:530f71d65c20
uartfax.c: pull from Tourmaline (GTM900 RI output)
In addition to the primary intent of bringing in GTM900 RI output support,
pulling uartfax.c wholesale from Tourmaline also changes the initial_time
argument in the two NU_Create_Timer() calls from 0 to 1. This change
is required for the new version of Nucleus used in Tourmaline and Selenite
(and apparently also used by TI in LoCosto), and it is harmless (no effect)
for the original TCS211 version of Nucleus used in Magnetite.
The new philosophical model being adopted is that Tourmaline is our new
development head firmware, whereas Magnetite will now be maintained
similarly to how Linux maintainers treat stable kernels: changes will be
backported from Tourmaline if they are deemed appropriate for stable
modem firmware.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 24 Oct 2020 17:33:10 +0000 |
| parents | 56abf6cf8a0b |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : m_cc.val | | SOURCE : "__out__\g23m_dfile\msg\cc.mdf" | | LastModified : "2003-02-04" | | IdAndVersion : "6147.600.97.108" | | SrcFileTime : "Mon Nov 24 15:50:36 2003" | | Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:14 2007 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef M_CC_VAL #define M_CC_VAL #define CDG_ENTER__M_CC_VAL #define CDG_ENTER__FILENAME _M_CC_VAL #define CDG_ENTER__M_CC_VAL__FILE_TYPE CDGINC #define CDG_ENTER__M_CC_VAL__LAST_MODIFIED _2003_02_04 #define CDG_ENTER__M_CC_VAL__ID_AND_VERSION _6147_600_97_108 #define CDG_ENTER__M_CC_VAL__SRC_FILE_TIME _Mon_Nov_24_15_50_36_2003 #include "CDG_ENTER.h" #undef CDG_ENTER__M_CC_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_access_ident */ #define VAL_ACCESS_IDENT___DEF (0x0) /* reserved */ #define AI_OCT_ID (0x0) /* octet identifier */ /* * Value constants for VAL_state */ #define VAL_STATE___DEF (0x0) /* reserved */ #define CS_0 (0x0) /* null */ #define CS_01 (0x2) /* MM connection pending */ #define CS_03 (0x23) /* Wait for network information */ #define CS_05 (0x25) /* CC-Establishment confirmed */ #define CS_06 (0x26) /* Recall present */ #define CS_1 (0x1) /* call initiated */ #define CS_3 (0x3) /* mobile originating call proceeding */ #define CS_4 (0x4) /* call delivered */ #define CS_6 (0x6) /* call present */ #define CS_7 (0x7) /* call received */ #define CS_8 (0x8) /* connect request */ #define CS_9 (0x9) /* mobile terminating call confirmed */ #define CS_10 (0xa) /* active */ #define CS_11 (0xb) /* disconnect request */ #define CS_12 (0xc) /* disconnect indication */ #define CS_19 (0x13) /* release request */ #define CS_26 (0x1a) /* mobile originating modify */ #define CS_27 (0x1b) /* mobile terminating modify */ #define CS_28 (0x1c) /* connect indication */ /* * Value constants for VAL_cause */ #define CAUSE_UNASSIGN (0x1) /* Unassigned (unallocated) Note 9 number */ #define CAUSE_NO_ROUTE (0x3) /* No route to destination */ #define CAUSE_CHAN_UNACCEPT (0x6) /* Channel unacceptable */ #define CAUSE_BARRED (0x8) /* Operator determined barring */ #define CAUSE_CALL_CLEAR (0x10) /* Normal call clearing */ #define CAUSE_USER_BUSY (0x11) /* User busy */ #define CAUSE_NO_RESPONSE (0x12) /* No user responding */ #define CAUSE_ALERT_NO_ANSWER (0x13) /* User alerting, no answer */ #define CAUSE_CALL_REJECT (0x15) /* Call rejected */ #define CAUSE_NUM_CHANGED (0x16) /* Number changed */ #define CAUSE_PREEMPTION (0x19) /* Pre-emption */ #define CAUSE_USER_CLEAR (0x1a) /* Non selected user clearing */ #define CAUSE_DEST_ORDER (0x1b) /* Destination out of order */ #define CAUSE_NUM_FORMAT (0x1c) /* Invalid number format (incomplete number) */ #define CAUSE_FACILITY_REJECT (0x1d) /* Facility rejected */ #define CAUSE_STATUS_ENQUIRY (0x1e) /* Response to STATUS ENQUIRY */ #define CAUSE_UNSPECIFIED (0x1f) /* Normal, unspecified */ #define CAUSE_NO_CHAN_AVAIL (0x22) /* No circuit/channel available */ #define CAUSE_NETWORK_ORDER (0x26) /* Network out of order */ #define CAUSE_TEMP_FAIL (0x29) /* Temporary failure */ #define CAUSE_SWITCH_CONGEST (0x2a) /* Switching equipment congestion */ #define CAUSE_INFO_DISCARD (0x2b) /* Access information discarded */ #define CAUSE_REQ_CHAN_UNAVAIL (0x2c) /* requested circuit/channel not available */ #define CAUSE_RESOURCE_UNAVAIL (0x2f) /* Resources unavailable, unspecified */ #define CAUSE_QOS_UNAVAIL (0x31) /* Quality of service unavailable */ #define CAUSE_FACILITY_UNSUBSCRIB (0x32) /* Requested facility not subscribed */ #define CAUSE_BARRED_IN_CUG (0x37) /* Incoming calls barred within the CUG */ #define CAUSE_BEARER_CAP_AUTHORIZ (0x39) /* Bearer capability not authorized */ #define CAUSE_BEARER_CAP_UNAVAIL (0x3a) /* Bearer capability not presently available */ #define CAUSE_SERVICE_UNAVAIL (0x3f) /* Service or option not available, unspecified */ #define CAUSE_BEARER_NOT_IMPLEM (0x41) /* Bearer service not implemented */ #define CAUSE_ACM_MAX (0x44) /* ACM equal to or greater than ACMmax */ #define CAUSE_FACILITY_NOT_IMPLEM (0x45) /* Requested facility not implemented */ #define CAUSE_RESTICT_BEARER_CAP (0x46) /* Only restricted digital information bearer capability is available */ #define CAUSE_SERVICE_NOT_IMPLEM (0x4f) /* Service or option not implemented, unspecified */ #define CAUSE_INVALID_TI (0x51) /* Invalid transaction identifier value */ #define CAUSE_USER_NOT_IN_CUG (0x57) /* User not member of CUG */ #define CAUSE_INCOMPAT_DEST (0x58) /* Incompatible destination */ #define CAUSE_INVALID_TRANS_NET (0x5b) /* Invalid transit network selection */ #define CAUSE_INCORRECT_MESSAGE (0x5f) /* Semantically incorrect message */ #define CAUSE_INVALID_MAND_INFO (0x60) /* Invalid mandatory information */ #define CAUSE_MESSAGE_TYPE_NOT_IMPLEM (0x61) /* Message type non-existent or not implemented */ #define CAUSE_MESSAGE_TYPE_INCOMPAT (0x62) /* Message type not compatible with protocol state */ #define CAUSE_INFO_ELEM_NOT_IMPLEM (0x63) /* Information element nonistent or not implemented */ #define CAUSE_COND_INFO_ELEM (0x64) /* Conditional IE error */ #define CAUSE_MESSAGE_INCOMPAT (0x65) /* Message not compatible with protocol state */ #define CAUSE_TIMER (0x66) /* Recovery on timer expiry */ #define CAUSE_PROTOCOL (0x6f) /* Protocol error, unspecified */ #define CAUSE_INTERWORKING (0x7f) /* Interworking, unspecified */ /* * Value constants for VAL_code */ #define VAL_CODE___DEF (0x0) /* reserved */ #define CSTD_GSM (0x0) /* GSM standardized coding */ /* * Value constants for VAL_cs */ #define CS_Q931 (0x0) /* standardized coding as described in CCITT Rec. Q.931 */ #define CS_INTERNATIONAL (0x1) /* reserved for other international standards */ #define CS_NATIONAL (0x2) /* national standard */ #define CS_GSM_PLMN (0x3) /* standard defined for the GSM PLMNS as described in 10.86/GSM 04.08 */ /* * Value constants for VAL_compress */ #define COMP_NO (0x0) /* data compression not possible */ #define COMP_YES (0x1) /* data compression possible */ /* * Value constants for VAL_config */ #define VAL_CONFIG___DEF (0x0) /* reserved */ #define CONF_POINT_TO_POINT (0x0) /* point-to-point */ /* * Value constants for VAL_congest_lev */ #define VAL_CONGEST_LEV___DEF (0x0) /* reserved */ #define CL_RECEIVER_READY (0x0) /* receiver ready */ #define CL_RECEIVER_NOT_READY (0xf) /* receiver not ready */ /* * Value constants for VAL_conn_elem */ #define CE_TRANSPA (0x0) /* transparent */ #define CE_RLP (0x1) /* non transparent (RLP) */ #define CE_TRANSPA_PREF (0x2) /* both, transparent preferred */ #define CE_RLP_PREF (0x3) /* both, non transparent preferred */ /* * Value constants for VAL_dtmf */ #define DTMF_EARLY (0x0) /* Reserved for earlier versions of the protocol. */ #define DTMF_CURRENT (0x1) /* The mobile station supports DTMF as specified in section 5.5.7 of GSM 4.08. */ /* * Value constants for VAL_duplex */ #define DUPLEX_HALF (0x0) /* half duplex */ #define DUPLEX_FULL (0x1) /* full duplex */ /* * Value constants for VAL_establish */ #define VAL_ESTABLISH___DEF (0x0) /* reserved */ #define ESTAB_DEMAND (0x0) /* demand */ /* * Value constants for VAL_hold */ #define HLD_IDLE (0x0) #define HLD_HOLD_REQ (0x1) #define HLD_CALL_HELD (0x2) #define HLD_RETRIEVE_REQ (0x3) /* * Value constants for VAL_trans_cap */ #define VAL_TRANS_CAP___DEF (0x0) /* reserved */ #define ITC_SPEECH (0x0) /* speech */ #define ITC_DIGITAL_UNRESTRICTED (0x1) /* unrestricted digital information */ #define ITC_AUDIO (0x2) /* audio 3.1 kHz, ex PLMN */ #define ITC_FAX_GROUP_3 (0x3) /* fascimile group 3 */ #define ITC_AUXILIARY_SPEECH (0x6) /* Auxiliary speech */ #define ITC_NETWORK_RESERVED (0x7) /* reserved, to be used in the network. */ /* * Value constants for VAL_intermed_rate */ #define VAL_INTERMED_RATE___DEF (0x0) /* reserved */ #define IR_8_KBIT (0x2) /* 8 kbit/s */ #define IR_16_KBIT (0x3) /* 16 kbit/s */ /* * Value constants for VAL_l1_ident */ #define VAL_L1_IDENT___DEF (0x0) /* reserved */ #define L1_OCT_ID (0x1) /* octet identifier */ /* * Value constants for VAL_l2_ident */ #define VAL_L2_IDENT___DEF (0x0) /* reserved */ #define L2_OCT_ID (0x2) /* octet identifier */ /* * Value constants for VAL_loc */ #define VAL_LOC___DEF (0x0) /* reserved */ #define LOC_USER (0x0) /* user */ #define LOC_PRIV_NET_LOCAL_USER (0x1) /* private network serving the local user */ #define LOC_PUB_NET_LOCAL_USER (0x2) /* public network serving the local user */ #define LOC_TRANSIT_NET (0x3) /* transit network */ #define LOC_PUB_NET_REMOTE_USER (0x4) /* public network serving the remote user */ #define LOC_PRIV_NET_REMOTE_USER (0x5) /* private network serving the remote user */ #define LOC_INTERNATIONAL_NET (0x7) /* international network */ #define LOC_BEYOND_POINT (0xa) /* network beyond interworking point */ /* * Value constants for VAL_modem_type */ #define VAL_MODEM_TYPE___DEF (0x0) /* reserved */ #define MT_NONE (0x0) /* none */ #define MT_V21 (0x1) /* V.21 */ #define MT_V22 (0x2) /* V.22 */ #define MT_V22BIS (0x3) /* V.22 bis */ #define MT_V23 (0x4) /* V.23 */ #define MT_V26TER (0x5) /* V.26 ter */ #define MT_V32 (0x6) /* V.32 */ #define MT_UNDEF (0x7) /* modem for undefined interface */ #define MT_AUTO (0x8) /* autobauding type 1 */ /* * Value constants for VAL_mpty */ #define MPTY_IDLE (0x0) #define MPTY_REQ (0x1) #define MPTY_CALL (0x2) #define MPTY_SPLIT (0x3) /* * Value constants for VAL_negotiate */ #define VAL_NEGOTIATE___DEF (0x0) /* reserved */ #define NEGOTIATE_NO (0x0) /* in-band negotiation not possible */ /* * Value constants for VAL_nirr */ #define NIRR_NO_MEANING (0x0) /* No meaning is associated with this value. */ #define NIRR_DATA (0x1) /* Data up to and including 4.8 kb/s, full rate, non-transparent, 6 kb/s radio interface rate is requested. */ /* * Value constants for VAL_nic_rx */ #define NIC_RX_NO (0x0) /* cannot accept data with network independent clock (i.e. sender does not support this optional procedure) */ #define NIC_RX_YES (0x1) /* can accept data with network independent clock (i.e. sender does support this optional procedure) */ /* * Value constants for VAL_nic_tx */ #define NIC_TX_NO (0x0) /* does not require to send data with network independent clock */ #define NIC_TX_YES (0x1) /* requires to send data with network independent clock */ /* * Value constants for VAL_nd */ #define VAL_ND___DEF (0x0) /* reserved */ #define ND_USER_SUSPEND (0x0) #define ND_USED_RESUME (0x1) #define ND_BEARER_CHANGE (0x2) /* * Value constants for VAL_npi */ #define VAL_NPI___DEF (0x0) /* reserved */ #define NPI_UNKNOWN (0x0) /* unknown */ #define NPI_ISDN (0x1) /* ISDN/telephony numbering plan (Rec. E.164/E.163) */ #define NPI_X121 (0x3) /* data numbering plan (Recommendation X.121) */ #define NPI_F69 (0x4) /* telex numbering plan (Recommendation F.69) */ #define NPI_NATIONAL (0x8) /* national numbering plan */ #define NPI_PRIVATE (0x9) /* private numbering plan */ #define NPI_EXTENSTION (0xf) /* reserved for extension */ /* * Value constants for VAL_num_data */ #define NDATA_7 (0x0) /* 7 bits */ #define NDATA_8 (0x1) /* 8 bits (this value is also used in the case of bit oriented protocols) */ /* * Value constants for VAL_num_stop */ #define NSTOP_1 (0x0) /* 1 bit (This value is also used in the case of synchronous mode) */ #define NSTOP_2 (0x1) /* 2 bits */ /* * Value constants for VAL_odd_even */ #define OE_EVEN (0x0) /* even number of address signals */ #define OE_ODD (0x1) /* odd number of address signals */ /* * Value constants for VAL_parity */ #define VAL_PARITY___DEF (0x0) /* reserved */ #define PARITY_ODD (0x0) /* odd */ #define PARITY_EVEN (0x2) /* even */ #define PARITY_NONE (0x3) /* none */ #define PARITY_0 (0x4) /* forced to 0 */ #define PARITY_1 (0x5) /* forced to 1 */ /* * Value constants for VAL_present */ #define VAL_PRESENT___DEF (0x0) /* reserved */ #define PRES_ALLOWED (0x0) /* Presentation allowed */ #define PRES_RESTRICTED (0x1) /* Presentation restricted */ #define PRES_NOT_AVAIL (0x2) /* Number not available due to interworking */ /* * Value constants for VAL_progress_desc */ #define VAL_PROGRESS_DESC___DEF (0x0) /* Unspecific */ #define PROG_NO_END_TO_END_PLMN (0x1) /* Call is not end-to-end PLMN/ISDN, further call progress information may be available in-band */ #define PROG_DEST_NON_PLMN (0x2) /* Destination address in non-PLMN/ISDN */ #define PROG_ORIGIN_NON_PLMN (0x3) /* Origination address in non-PLMN/ISDN */ #define PROG_RETURN_TO_PLMN (0x4) /* Call has returned to the PLMN/ISDN */ #define PROG_INBAND_AVAIL (0x8) /* In-band information or appropriate pattern now available */ #define PROG_END_TO_END_PLMN (0x20) /* Call is end-to-end PLMN/ISDN */ #define PROG_QUEUEING (0x40) /* Queueing */ /* * Value constants for VAL_rad_chan_req */ #define VAL_RAD_CHAN_REQ___DEF (0x0) /* reserved */ #define RCR_FULL_ONLY (0x1) /* full rate support only mobile station */ #define RCR_HALF_PREF (0x2) /* dual rate support mobile station/half rate preferred */ #define RCR_FULL_PREF (0x3) /* dual rate support mobile station/full rate preferred */ /* * Value constants for VAL_rate_adapt */ #define VAL_RATE_ADAPT___DEF (0x0) /* reserved */ #define RA_NONE (0x0) /* no rate adaption */ #define RA_V110 (0x1) /* V.110/X.30 rate adaption */ #define RA_X31 (0x2) /* CCITT X.31 flag stuffing */ /* * Value constants for VAL_repeat */ #define REPEAT_CIRCULAR (0x1) /* Circular for successive selection 'mode 1 alternate mode 2' */ #define REPEAT_SEQUENTIAL (0x3) /* Sequential for successive selection 'mode 1 and then mode 2' */ /* * Value constants for VAL_screen */ #define SCR_USER_UNSCREENED (0x0) /* User-provided, not screened */ #define SCR_USER_PASSED (0x1) /* User-provided, verified and passed */ #define SCR_USER_FAILED (0x2) /* User-provided, verified and failed */ #define SCR_NETWORD (0x3) /* Network provided */ /* * Value constants for VAL_signal */ #define VAL_SIGNAL___DEF (0x0) /* reserved */ #define SIGNAL_DIAL_ON (0x0) /* dial tone on */ #define SIGNAL_BACK_ON (0x1) /* ring back tone on */ #define SIGNAL_INTERCEPT_ON (0x2) /* intercept tone on */ #define SIGNAL_CONGEST_ON (0x3) /* network congestion tone on */ #define SIGNAL_BUSY_ON (0x4) /* busy tone on */ #define SIGNAL_CONFIRM_ON (0x5) /* confirm tone on */ #define SIGNAL_ANSWER_ON (0x6) /* answer tone on */ #define SIGNAL_WAITING_ON (0x7) /* call waiting tone on */ #define SIGNAL_HOOK_OFF_ON (0x8) /* off-hook warning tone on */ #define SIGNAL_TONES_OFF (0x3f) /* tones off */ #define SIGNAL_ALERT_OFF (0x4f) /* alerting off */ /* * Value constants for VAL_sig_access_prot */ #define VAL_SIG_ACCESS_PROT___DEF (0x0) /* reserved */ #define SIAP_I440 (0x1) /* I.440/450 */ #define SIAP_X21 (0x2) /* X.21 */ #define SIAP_X28_INDIV_NUI (0x3) /* X.28 - dedicated PAD, individual NUI */ #define SIAP_X28_UNIV_NUI (0x4) /* X.28 - dedicated PAD, universal NUI */ #define SIAP_X28_NON_DEDIC (0x5) /* X.28 - non dedicated PAD */ #define SIAP_X32 (0x6) /* X.32 */ /* * Value constants for VAL_structure */ #define VAL_STRUCTURE___DEF (0x0) /* reserved */ #define STRC_SERV_DATA_INTEG (0x0) /* service data unit integrity */ #define STRC_UNSTRUCTURED (0x3) /* unstructured */ /* * Value constants for VAL_sync_async */ #define SYNCHRONOUS (0x0) /* synchronous */ #define ASYNCHRONOUS (0x1) /* asynchronous */ /* * Value constants for VAL_trans_mode */ #define TM_CIRCUIT (0x0) /* circuit mode */ #define TM_PACKET (0x1) /* packet mode */ /* * Value constants for VAL_ton */ #define VAL_TON___DEF (0x0) /* reserved */ #define TON_UNKNOWN (0x0) /* unknown */ #define TON_INTERNATIONAL (0x1) /* international number */ #define TON_NATIONAL (0x2) /* national number */ #define TON_NETWORK (0x3) /* network specific number */ #define TON_DEDICATED (0x4) /* dedicated access, short code */ #define TON_EXTENSION (0x7) /* reserved for extention */ /* * Value constants for VAL_tos */ #define VAL_TOS___DEF (0x0) /* reserved */ #define TOS_NSAP (0x0) /* NSAP (X.213/ISO 8348 AD2) */ #define TOS_USER (0x2) /* User specified */ /* * Value constants for VAL_user_inf_l1_prot */ #define VAL_USER_INF_L1_PROT___DEF (0x0) /* reserved */ #define L1_DEFAULT (0x0) /* default layer 1 protocol */ /* * Value constants for VAL_user_inf_l2_prot */ #define VAL_USER_INF_L2_PROT___DEF (0x0) /* reserved */ #define L2_X25 (0x6) /* recommendation X.25, link level */ #define L2_ISO6429 (0x8) /* ISO 6429, codeset 0 (DC1/DC3) */ #define L2_X75 (0x9) /* X.75 layer 2 modified (teletex) */ #define L2_VIDEOTEX (0xa) /* videotex profile 1 */ #define L2_COPFC (0xc) /* COPnoFlCt (Character oriented Protocol with no Flow Control mechanism) */ /* * Value constants for VAL_user_rate */ #define VAL_USER_RATE___DEF (0x0) /* reserved */ #define UR_0_3_KBIT (0x1) /* rate : 0.3 kbit/s Recommendation X.1 and V.110 */ #define UR_1_2_KBIT (0x2) /* rate : 1.2 kbit/s Recommendation X.1 and V.110 */ #define UR_2_4_KBIT (0x3) /* rate : 2.4 kbit/s Recommendation X.1 and V.110 */ #define UR_4_8_KBIT (0x4) /* rate : 4.8 kbit/s Recommendation X.1 and V.110 */ #define UR_9_6_KBIT (0x5) /* rate : 9.6 kbit/s Recommendation X.1 and V.110 */ #define UR_12_0_KBIT_TRANS (0x6) /* rate : 12.0 kbit/s transparent */ #define UR_1_2_KBIT_V23 (0x7) /* rate : 1.2 kbit/s/75 bit/s Recommendation V.23, X.1,V.110. */ /* * Value constants for VAL_pd */ #define VAL_PD___DEF (0x0) /* reserved */ #define PD_USER (0x0) /* User specific protocol */ #define PD_HIGH_LAYER (0x1) /* OSI high layer protocols */ #define PD_X244 (0x2) /* X.244 */ #define PD_SYS_MANAGE (0x3) /* Reserved for system management convergence function */ #define PD_IA5 (0x4) /* IA5 characters */ #define PD_V120 (0x7) /* Rec.V.120 rate adaption */ #define PD_Q931 (0x8) /* Q.931 (I.451) user-network call control messages */ /* * Value constants for VAL_speech_vers1 */ #define SPEECH_VERS_FR (0x0) /* full rate speech version 1 */ #define SPEECH_VERS_HR (0x1) /* half rate speech version 1 */ #define SPEECH_VERS_EFR (0x2) /* full rate speech version 2 (enhanced full rate) */ #define SPEECH_VERS_AMR_HR (0x5) /* half rate speech version 3 (AHS) */ #define SPEECH_VERS_AMR_FR (0x4) /* full rate speech version 3 (AFS) */ #define SPEECH_VERS_NONE (0xf) /* no speech version given */ /* * Value constants for VAL_modem_type_2 */ #define OTHER_MODEM_TYPE_NONE (0x0) /* No other modem type specified */ #define OTHER_MODEM_TYPE_V32BIS (0x1) /* V.32bis */ #define OTHER_MODEM_TYPE_V34 (0x2) /* V.34 */ /* * Value constants for VAL_fnur */ #define FNUR_NOT_APPLICABLE (0x0) /* Fixed network user rate not applicable */ #define FNUR_9600 (0x1) /* FNUR 9.6 kbit/s */ #define FNUR_14400 (0x2) /* FNUR 14.4 kbit/s */ #define FNUR_19200 (0x3) /* FNUR 19.2 kbit/s */ #define FNUR_28800 (0x4) /* FNUR 28.8 kbit/s */ #define FNUR_38400 (0x5) /* FNUR 38.4 kbit/s */ #define FNUR_48000 (0x6) /* FNUR 48.0 kbit/s */ #define FNUR_56000 (0x7) /* FNUR 56.0 kbit/s */ #define FNUR_64000 (0x8) /* FNUR 64.0 kbit/s */ /* * Value constants for VAL_acc */ #define ACC_EMPTY (0x0) /* No channel codings acceptable */ #define ACC_48 (0x1) /* TCH 4.8 acceptable */ #define ACC_96 (0x2) /* TCH 9.6 acceptable */ #define ACC_48_96 (0x3) /* TCH 4.8/9.6 acceptable */ #define ACC_144 (0x8) /* TCH 14.4 acceptable */ #define ACC_48_144 (0x9) /* TCH 4.8/14.4 acceptable */ #define ACC_96_144 (0xa) /* TCH 9.6/14.4 acceptable */ #define ACC_ALL (0xb) /* All channel codings acceptable */ /* * Value constants for VAL_mTch */ #define MAX_TCH_1 (0x0) /* Maximum of 1 TCH */ #define MAX_TCH_2 (0x1) /* Maximum of 2 TCH */ #define MAX_TCH_3 (0x2) /* Maximum of 3 TCH */ #define MAX_TCH_4 (0x3) /* Maximum of 4 TCH */ #define MAX_TCH_5 (0x4) /* Maximum of 5 TCH */ #define MAX_TCH_6 (0x5) /* Maximum of 6 TCH */ #define MAX_TCH_7 (0x6) /* Maximum of 7 TCH */ #define MAX_TCH_8 (0x7) /* Maximum of 8 TCH */ /* * Value constants for VAL_uimi */ #define UIMI_NOT_ALLOWED (0x0) /* User initiated modification not allowed/required */ #define UIMI_MAX_1_TCH (0x1) /* User initiated modification up to 1 TCH/F */ #define UIMI_MAX_2_TCH (0x2) /* User initiated modification up to 2 TCH/F */ #define UIMI_MAX_3_TCH (0x3) /* User initiated modification up to 3 TCH/F */ #define UIMI_MAX_4_TCH (0x4) /* User initiated modification up to 4 TCH/F */ /* * Value constants for VAL_waiur */ #define WAIUR_NOT_APPLICABLE (0x0) /* Wanted Air Interface user rate not applicable */ #define WAIUR_9600 (0x1) /* WAIUR 9.6 kbit/s */ #define WAIUR_14400 (0x2) /* WAIUR 14.4 kbit/s */ #define WAIUR_19200 (0x3) /* WAIUR 19.2 kbit/s */ #define WAIUR_28800 (0x5) /* WAIUR 28.8 kbit/s */ #define WAIUR_38400 (0x6) /* WAIUR 38.4 kbit/s */ #define WAIUR_43200 (0x7) /* WAIUR 43.2 kbit/s */ #define WAIUR_57600 (0x8) /* WAIUR 57.6 kbit/s */ /* * Value constants for VAL_ccbs_act */ #define CCBS_NO (0x0) /* CCBS is not possible */ #define CCBS_YES (0x1) /* CCBS is possible */ /* * Value constants for VAL_pcp */ #define PCP_NO (0x0) /* Mobile does not support prolonged clearing procedure */ #define PCP_YES (0x1) /* Mobile supports prolonged clearing procedure */ /* * Value constants for VAL_rcl_type */ #define CCBS (0x0) /* CCBS */ #define CCBS_1 (0x1) /* Shall be treated as CCBS (intended for other similar types of Recall) */ #define CCBS_2 (0x2) /* Shall be treated as CCBS (intended for other similar types of Recall) */ #define CCBS_3 (0x3) /* Shall be treated as CCBS (intended for other similar types of Recall) */ #define CCBS_4 (0x4) /* Shall be treated as CCBS (intended for other similar types of Recall) */ #define CCBS_5 (0x5) /* Shall be treated as CCBS (intended for other similar types of Recall) */ #define CCBS_6 (0x6) /* Shall be treated as CCBS (intended for other similar types of Recall) */ /* * Value constants for VAL_coding_bc3x1 */ #define CODING_BC3X_SPEECH (0x0) /* Octet 3x of IE Bearer Capabilities indicates speech codec version */ #define CODING_BC3X_OTHER (0x1) /* Octet 3x of IE Bearer Capabilities used for other extension of octet 3 */ /* * Value constants for VAL_ctm */ #define CTM_NO (0x0) /* Mobile does not support prolonged clearing procedure */ #define CTM_YES (0x1) /* Mobile supports prolonged clearing procedure */ /* * user defined constants */ #define L3MAX (0xfb) #define MAX_SS_VERSION (0x1) #include "CDG_LEAVE.h" #endif