FreeCalypso > hg > fc-magnetite
view cdg3/cdginc-conservative/m_rr_com.val @ 695:530f71d65c20
uartfax.c: pull from Tourmaline (GTM900 RI output)
In addition to the primary intent of bringing in GTM900 RI output support,
pulling uartfax.c wholesale from Tourmaline also changes the initial_time
argument in the two NU_Create_Timer() calls from 0 to 1. This change
is required for the new version of Nucleus used in Tourmaline and Selenite
(and apparently also used by TI in LoCosto), and it is harmless (no effect)
for the original TCS211 version of Nucleus used in Magnetite.
The new philosophical model being adopted is that Tourmaline is our new
development head firmware, whereas Magnetite will now be maintained
similarly to how Linux maintainers treat stable kernels: changes will be
backported from Tourmaline if they are deemed appropriate for stable
modem firmware.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 24 Oct 2020 17:33:10 +0000 |
| parents | c15047b3d00d |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : m_rr_com.val | | SOURCE : "msg\rr_com.mdf" | | LastModified : "2004-01-16" | | IdAndVersion : "8010.606.02.008" | | SrcFileTime : "Wed Nov 28 10:20:42 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:52:54 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO * CCDNAME: RR_COM */ #ifndef M_RR_COM_VAL #define M_RR_COM_VAL #define CDG_ENTER__M_RR_COM_VAL #define CDG_ENTER__FILENAME _M_RR_COM_VAL #define CDG_ENTER__M_RR_COM_VAL__FILE_TYPE CDGINC #define CDG_ENTER__M_RR_COM_VAL__LAST_MODIFIED _2004_01_16 #define CDG_ENTER__M_RR_COM_VAL__ID_AND_VERSION _8010_606_02_008 #define CDG_ENTER__M_RR_COM_VAL__SRC_FILE_TIME _Wed_Nov_28_10_20_42_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__M_RR_COM_VAL #undef CDG_ENTER__FILENAME // VALTAB-FF: REL99 // // Value constants for VAL_ab_type // // #define AB_8_BIT (0x0) /* 8 bit access burst shall be used */ // #define AB_11_BIT (0x1) /* 11 bit access burst shall be used */ /* * Value constants for VAL_acc_tech_typ */ #define VAL_ACC_TECH_TYP___DEF (0x0) /* unknown */ #define ACC_GSM_P (0x0) /* GSM P */ #define ACC_GSM_E (0x1) /* GSM E -note that GSM E covers GSM P */ #define ACC_GSM_R (0x2) /* GSM R - note that GSM R covers GSM E and GSM P */ #define ACC_GSM_1800 (0x3) /* GSM 1800 (DCS) */ #define ACC_GSM_1900 (0x4) /* GSM 1900 (PCS) */ #define ACC_GSM_450 (0x5) /* GSM 450 */ #define ACC_GSM_480 (0x6) /* GSM 480 */ #define ACC_GSM_850 (0x7) /* GSM 850 */ // VAL-FF: REL99 // #define ACC_CAP_SAME_AS_PRECED (0xf) /* When access capabilities of a band is same as it's previously included band. */ // VAL-FF: REL99 // #define ACC_INVALID (0xe) /* no valid access technology type present (this value isn?t defined in the specification) */ // VAL-FF: !REL99 #define ACC_INVALID (0xf) /* no valid access technology type present (this value isn?t defined in the specification) */ /* * Value constants for VAL_pow_class */ #define POWER_CLASS_1 (0x1) /* Power Class 1 */ #define POWER_CLASS_2 (0x2) /* Power Class 2 */ #define POWER_CLASS_3 (0x3) /* Power Class 3 */ #define POWER_CLASS_4 (0x4) /* Power Class 4 */ #define POWER_CLASS_5 (0x5) /* Power Class 5 */ #define VAL_POW_CLASS___6 (0x6) /* Reserved */ #define VAL_POW_CLASS___7 (0x7) /* Reserved */ #define MIN_CLASS_GSM (0x2) /* minimal GSM power class */ #define MAX_CLASS_GSM (0x5) /* maximal GSM power class */ #define MIN_CLASS_DCS (0x1) /* minimal DCS power class */ #define MAX_CLASS_DCS (0x3) /* maximal DCS power class */ #define MIN_CLASS_PCS (0x1) /* minimal PCS power class */ #define MAX_CLASS_PCS (0x3) /* maximal PCS power class */ #define CLASS_MIN_POW_GSM (0x5) /* GSM power class with the lowest output power */ #define CLASS_MIN_POW_DCS (0x2) /* DCS power class with the lowest output power */ #define CLASS_MIN_POW_PCS (0x2) /* PCS power class with the lowest output power */ #define IDX_PWRCLASS_900 (0x0) /* Index for use with rf_cap.rf_power.pow_class4[] array */ #define IDX_PWRCLASS_1800 (0x1) /* Index for use with rf_cap.rf_power.pow_class4[] array */ #define IDX_PWRCLASS_1900 (0x2) /* Index for use with rf_cap.rf_power.pow_class4[] array */ #define IDX_PWRCLASS_850 (0x3) /* Index for use with rf_cap.rf_power.pow_class4[] array */ #define IDX_PWRCLASS_400 (0x4) /* Index for use with rf_cap.rf_power.pow_class4[] array */ // VAL-FF: REL99 // #define IDX_PWRCLASS_700 (0x5) /* Index for use with rf_cap.rf_power.pow_class4[] array */ /* * Value constants for VAL_bool */ #define NO (0x0) /* value is not set */ #define YES (0x1) /* value is set */ #define NOT_SUPPORTED (0x0) /* feature not supported */ #define SUPPORTED (0x1) /* feature supported */ /* * Value constants for VAL_flag */ #define GRR_NO (0x0) /* not present */ #define GRR_YES (0x1) /* present */ // VALTAB-FF: REL99 // // Value constants for VAL_bss_paging_coord // // #define CS_PG_NOT_SUPPORTED (0x0) /* The cell does not support Circuit-Switched paging co-ordination */ // #define CS_PG_SUPPORTED (0x1) /* The cell supports Circuit-Switched paging co-ordination */ /* * Value constants for VAL_ctrl_ack_type */ #define VAL_CTRL_ACK_TYPE___0 (0x0) /* default format is four access bursts */ #define VAL_CTRL_ACK_TYPE___1 (0x1) /* default format is RLC/MAC control block. */ /* * Value constants for VAL_dtm_g_ms_class */ #define SUB_CLASS_1 (0x0) /* Sub-Class 1 supported */ #define SUB_CLASS_5 (0x1) /* Sub-Class 5 supported */ #define SUP_CLASS_9 (0x2) /* Sub-Class 9 supported */ #define VAL_DTM_G_MS_CLASS___3 (0x3) /* Reserved */ // VALTAB-FF: TI_PS_FF_REL99_AND_ABOVE // // Value constants for VAL_dtm_g_high_ms_class // // #define VAL_DTM_G_HIGH_MS_CLASS___0 (0x0) /* Reserved */ // #define SUB_CLASS_31_OR_36 (0x1) /* Multislot class 31 or 36 supported */ // #define SUB_CLASS_32_OR_37 (0x2) /* Multislot class 32 or 37 supported */ // #define SUB_CLASS_33_OR_38 (0x3) /* Multislot class 33 or 38 supported */ // #define SUB_CLASS_41 (0x4) /* Multislot class 41 supported */ // #define SUB_CLASS_42 (0x5) /* Multislot class 42 supported */ // #define SUB_CLASS_43 (0x6) /* Multislot class 43 supported */ // #define SUB_CLASS_44 (0x7) /* Multislot class 44 supported */ // VALTAB-FF: REL99 // // Value constants for VAL_dtm_support // // #define DTM_NOT_SUPPORTED (0x0) /* The cell does not support DTM procedures. */ // #define DTM_SUPPORTED (0x1) /* The cell supports DTM procedures. */ // VALTAB-FF: REL99 // // Value constants for VAL_egprs_packet_channel_request // // #define EGPRS_PACKET_CHANNEL_REQUEST_MSG_SENT (0x0) // #define PACKET_CHANNEL_REQUEST_MSG_SENT (0x1) /* * Value constants for VAL_bands */ #define BAND_AUTO (0x0) /* 0b00000000: All bands shall be scanned */ #define BAND_GSM_900 (0x1) /* 0b00000001: GSM 900 is supported, shall be scanned */ #define BAND_DCS_1800 (0x2) /* 0b00000010: DCS 1800 is supported, shall be scanned */ #define BAND_PCS_1900 (0x4) /* 0b00000100: PCS 1900 is supported, shall be scanned */ #define BAND_E_GSM (0x8) /* 0b00001000: Extended GSM is supported, shall be scanned */ #define BAND_GSM_850 (0x10) /* 0b00010000: GSM 850 is supported, shall be scanned */ #define BAND_GSM_450 (0x20) /* 0b00100000: GSM 450 is supported, shall be scanned */ #define BAND_GSM_480 (0x40) /* 0b01000000: GSM 480 is supported, shall be scanned */ #define BAND_R_GSM (0x80) /* 0b10000000: R-GSM is supported, shall be scanned */ #define BAND_DUAL (0x3) /* 0b00000011: GSM 900 and DCS 1800 is supported, shall be scanned */ #define BAND_DUAL_EXT (0xb) /* 0b00001011: GSM 900, E-GSM and DCS 1800 is supported, shall be scanned */ #define BAND_DUAL_US (0x14) /* 0b00010100: GSM 850 and PCS 1900 is supported, shall be scanned */ /* * Value constants for VAL_egsm */ #define EGSM_NOT_SUPPORTED (0x0) /* The mobile station does not support the extension band. */ #define EGSM_SUPPORTED (0x1) /* The mobile station does support the extension band (E-GSM or R-GSM). */ // VALTAB-FF: REL99 // // Value constants for VAL_freq_scroll // // #define SCROL_NO (0x0) /* Frequency scrolling is not used */ // #define SCROL_YES (0x1) /* Frequency scrolling is used */ /* * Value constants for VAL_gsm400_supp */ #define VAL_GSM400_SUPP___0 (0x0) /* reserved (if neither GSM 480 nor GSM 450 is supported the whole gsm400_struct is omitted) */ #define GSM480 (0x1) /* GSM 480 supported but GSM 450 not supported */ #define GSM450 (0x2) /* GSM 450 supported but GSM 480 not supported */ #define GSM450_480 (0x3) /* GSM 450 supported and GSM 480 supported */ /* * Value constants for VAL_pow_8psk_cap */ #define VAL_POW_8PSK_CAP___0 (0x0) /* Reserved */ #define POWER_CLASS_E1 (0x1) #define POWER_CLASS_E2 (0x2) #define POWER_CLASS_E3 (0x3) /* * Value constants for VAL_mod_cap */ #define DL_ONLY_8PSK (0x0) /* 8-PSK supported for downlink reception only */ #define FULL_8PSK (0x1) /* 8-PSK supported for uplink transmission and downlink reception */ /* * Value constants for VAL_mb_value */ #define VAL_MB_VALUE___DEF (0x0) /* Reserved */ #define MB_NO_EUROPEAN_BAND (0x0) /* 0b000: neither GSM 900, E-GSM or DCS 1800 supported */ #define MB_GSM900 (0x1) /* 0b001: GSM 900 is supported */ #define MB_EGSM (0x2) /* 0b010: E-GSM is supported */ #define MB_DCS1800 (0x4) /* 0b100: DCS 1800 is supported */ #define MB_DUAL (0x5) /* 0b101: GSM 900 and DCS 1800 is supported */ #define MB_DUAL_EXT (0x6) /* 0b110: E-GSM and DCS 1800 is supported */ /* * Value constants for VAL_ms_class */ #define MSLOT_CLASS_1 (0x1) /* Multi Slot Class 1 */ #define MSLOT_CLASS_2 (0x2) /* Multi Slot Class 2 */ #define MSLOT_CLASS_3 (0x3) /* Multi Slot Class 3 */ #define MSLOT_CLASS_4 (0x4) /* Multi Slot Class 4 */ #define MSLOT_CLASS_5 (0x5) /* Multi Slot Class 5 */ #define MSLOT_CLASS_6 (0x6) /* Multi Slot Class 6 */ #define MSLOT_CLASS_7 (0x7) /* Multi Slot Class 7 */ #define MSLOT_CLASS_8 (0x8) /* Multi Slot Class 8 */ #define MSLOT_CLASS_9 (0x9) /* Multi Slot Class 9 */ #define MSLOT_CLASS_10 (0xa) /* Multi Slot Class 10 */ #define MSLOT_CLASS_11 (0xb) /* Multi Slot Class 11 */ #define MSLOT_CLASS_12 (0xc) /* Multi Slot Class 12 */ #define MSLOT_CLASS_13 (0xd) /* Multi Slot Class 13 */ #define MSLOT_CLASS_14 (0xe) /* Multi Slot Class 14 */ #define MSLOT_CLASS_15 (0xf) /* Multi Slot Class 15 */ #define MSLOT_CLASS_16 (0x10) /* Multi Slot Class 16 */ #define MSLOT_CLASS_17 (0x11) /* Multi Slot Class 17 */ #define MSLOT_CLASS_18 (0x12) /* Multi Slot Class 18 */ #define MSLOT_CLASS_19 (0x13) /* Multi Slot Class 19 */ #define MSLOT_CLASS_20 (0x14) /* Multi Slot Class 20 (not for HSCSD) */ #define MSLOT_CLASS_21 (0x15) /* Multi Slot Class 21 (not for HSCSD) */ #define MSLOT_CLASS_22 (0x16) /* Multi Slot Class 22 (not for HSCSD) */ #define MSLOT_CLASS_23 (0x17) /* Multi Slot Class 23 (not for HSCSD) */ #define MSLOT_CLASS_24 (0x18) /* Multi Slot Class 24 (not for HSCSD) */ #define MSLOT_CLASS_25 (0x19) /* Multi Slot Class 25 (not for HSCSD) */ #define MSLOT_CLASS_26 (0x1a) /* Multi Slot Class 26 (not for HSCSD) */ #define MSLOT_CLASS_27 (0x1b) /* Multi Slot Class 27 (not for HSCSD) */ #define MSLOT_CLASS_28 (0x1c) /* Multi Slot Class 28 (not for HSCSD) */ #define MSLOT_CLASS_29 (0x1d) /* Multi Slot Class 29 (not for HSCSD) */ /* * Value constants for VAL_nmo */ #define VAL_NMO___0 (0x0) /* Network Mode 1 */ #define VAL_NMO___1 (0x1) /* Network Mode 2 */ #define VAL_NMO___2 (0x2) /* Network Mode 3 */ #define VAL_NMO___3 (0x3) /* reserved */ // VALTAB-FF: REL99 // // Value constants for VAL_pfc_feature_mode // // #define PFC_NOT_SUPPORTED (0x0) /* The network does not support packet flow context procedures. */ // #define PFC_SUPPORTED (0x1) /* The network supports packet flow context procedures. */ // VALTAB-FF: REL99 // // Value constants for VAL_rep_priority // // #define NORMAL_PRIO (0x0) /* Normal reporting priority */ // #define HIGH_PRIO (0x1) /* High reporting priority */ /* * Value constants for VAL_rf_pow_cap */ #define RF_CLASS_1 (0x0) /* class 1 for GSM 850, 900P+E, DCS 1800 and PCS 1900 */ #define RF_CLASS_2 (0x1) /* class 2 for GSM 850, 900P+E, DCS 1800 and PCS 1900 */ #define RF_CLASS_3 (0x2) /* class 3 for GSM 850, 900P+E, DCS 1800 and PCS 1900 */ #define RF_CLASS_4 (0x3) /* class 4 for GSM 850, 900P+E (reserved for DCS 1800 and PCS 1900) */ #define RF_CLASS_5 (0x4) /* class 5 for GSM 850, 900P+E (reserved for DCS 1800 and PCS 1900) */ #define VAL_RF_POW_CAP___5 (0x5) /* reserved */ #define VAL_RF_POW_CAP___6 (0x6) /* reserved */ #define RF_CLASS_IRRELEVANT (0x7) /* irrelevant for this IE (multiband GSM MS) */ /* * Value constants for VAL_rev_lev */ #define VAL_REV_LEV___DEF (0x0) /* Reserved by future use */ #define REV_LEV_PHASE_1 (0x0) /* Reserved for GSM phase 1 */ #define REV_LEV_PHASE_2 (0x1) /* Used by GSM phase 2 mobile stations */ #define REV_LEV_R99_SUPPORT (0x2) /* Used by mobile stations supporting R99 or later versions */ // VALTAB-FF: REL99 // // Value constants for VAL_rev99 // // #define PHASE_1 (0x0) /* Release ?98 or older */ // #define RELEASE99 (0x1) /* Release ?99 onwards */ /* * Value constants for VAL_single_band */ #define VAL_SINGLE_BAND___DEF (0x0) /* Reserved */ #define SINGLE_EGSM (0x0) /* Extended GSM is supported */ #define SINGLE_GSM900 (0x1) /* GSM 900 is supported */ #define SINGLE_DCS1800 (0x2) /* DCS 1800 is supported */ #define SINGLE_GSM450 (0x3) /* GSM 450 is supported */ #define SINGLE_GSM480 (0x4) /* GSM 480 is supported */ #define SINGLE_GSM850 (0x5) /* GSM 850 is supported */ #define SINGLE_PCS1900 (0x6) /* PCS 1900 is supported */ /* * Value constants for VAL_sms_val */ #define SM_1 (0x0) /* 1/4 timeslot (~144 micro sec) */ #define SM_2 (0x1) /* 2/4 timeslot (~288 micro sec) */ #define SM_3 (0x2) /* 3/4 timeslot (~433 micro sec) */ #define SM_4 (0x3) /* 4/4 timeslot */ #define SM_5 (0x4) /* 5/4 timeslot */ #define SM_6 (0x5) /* 6/4 timeslot */ #define SM_7 (0x6) /* 7/4 timeslot */ #define SM_8 (0x7) /* 8/4 timeslot */ #define SM_9 (0x8) /* 9/4 timeslot */ #define SM_10 (0x9) /* 10/4 timeslot */ #define SM_11 (0xa) /* 11/4 timeslot */ #define SM_12 (0xb) /* 12/4 timeslot */ #define SM_13 (0xc) /* 13/4 timeslot */ #define SM_14 (0xd) /* 14/4 timeslot */ #define SM_15 (0xe) /* 15/4 timeslot */ #define SM_16 (0xf) /* 16/4 timeslot (~2307 micro sec) */ /* * Value constants for VAL_ss_screen */ #define VAL_SS_SCREEN___DEF (0x0) /* for future use (The network shall interpret these values the same as ?1?) */ #define SS_SCREEN_DEFAULT (0x0) /* default value of phase 1 */ #define SS_SCREEN_PHASE_2 (0x1) /* capability of handling of ellipsis notation and phase 2 error handling */ /* * Value constants for VAL_ucs2_treat */ #define DEFAULT_PREF (0x0) /* the ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2. */ #define NO_PREF (0x1) /* the ME has no preference between the use of the default alphabet and the use of UCS2. */ // VALTAB-FF: REL99 // // Value constants for VAL_rep_offset_900 // // #define ZERO_DB (0x0) /* Apply an offset of 0 dB to the reported value */ // #define SIX_DB (0x1) /* Apply an offset of 6 dB to the reported value */ // #define TWELVE_DB (0x2) /* Apply an offset of 12 dB to the reported value */ // #define EIGHTEEN_DB (0x3) /* Apply an offset of 18 dB to the reported value */ // #define TWENTYFOUR_DB (0x4) /* Apply an offset of 24 dB to the reported value */ // #define THIRTY_DB (0x5) /* Apply an offset of 30 dB to the reported value */ // #define THIRTYSIX_DB (0x6) /* Apply an offset of 36 dB to the reported value */ // #define FORTYTWO_DB (0x7) /* Apply an offset of 42 dB to the reported value */ // VALTAB-FF: REL99 // // Value constants for VAL_th_rep_900 // // #define ZERO (0x0) /* Apply priority reporting if the reported value is above 0 dB */ // #define SIX (0x1) /* Apply priority reporting if the reported value is above 6 dB */ // #define TWELVE (0x2) /* Apply priority reporting if the reported value is above 12 dB */ // #define EIGHTEEN (0x3) /* Apply priority reporting if the reported value is above 18 dB */ // #define TWENTYFOUR (0x4) /* Apply priority reporting if the reported value is above 24 dB */ // #define THIRTY (0x5) /* Apply priority reporting if the reported value is above 30 dB */ // #define THIRTYSIX (0x6) /* Apply priority reporting if the reported value is above 36 dB */ // #define INDEFINITELY (0x7) /* Never apply priority reporting */ // VALTAB-FF: REL99 // // Value constants for VAL_ccn_active // // #define VAL_CCN_ACTIVE___0 (0x0) /* The Cell has not enabled CCN procedure.(but if received on PMO/ PCCO then follow the one received on broadcast) */ // #define VAL_CCN_ACTIVE___1 (0x1) /* The Cell has enabled CCN procedure. */ // VALTAB-FF: REL99 // // Value constants for VAL_nw_ext_ul_tbf // // #define EXT_UL_TBF_NOT_SUPPORTED (0x0) /* The network does not support Extended UL TBF procedures. */ // #define EXT_UL_TBF_SUPPORTED (0x1) /* The network does support Extended UL TBF procedures. */ // VALTAB-FF: REL99 // // Value constants for VAL_ccn_supported // // #define CCN_SUPPORTED (0x0) /* CCN is enabled towards the corresponding cell */ // #define CCN_NOT_SUPPORTED (0x1) /* CCN is disabled towards the corresponding cell */ // VALTAB-FF: TI_PS_FF_REL99_AND_ABOVE // // Value constants for VAL_ms_pwr_profile // // #define MS_PWR_PROF0 (0x0) /* MULTISLOT_POWER_PROFILE 0 */ // #define MS_PWR_PROF1 (0x1) /* MULTISLOT_POWER_PROFILE 1 */ // #define MS_PWR_PROF2 (0x2) /* MULTISLOT_POWER_PROFILE 2 */ // #define MS_PWR_PROF3 (0x3) /* MULTISLOT_POWER_PROFILE 3 */ // VALTAB-FF: TI_PS_FF_REL99_AND_ABOVE // // Value constants for VAL_rep_acch_cap // // #define REP_DL_FACCH (0x0) /* MS supports Repeated Downlink FACCH */ // #define REP_SACCH_DL_FACCH (0x1) /* MS supports Repeated SACCH and Repeated Downlink FACCH */ // VALTAB-FF: TI_PS_FF_REL99_AND_ABOVE // // Value constants for VAL_dl_adv_rx_per // // #define DL_ADVANC_RX_PERF_NOT_SUPPORT (0x0) /* Downlink Advanced Receiver Performance not supported */ // #define DL_ADVANC_RX_PERF_PHASE1_SUPPORT (0x1) /* Downlink Advanced Receiver Performance – phase I supported */ // #define DL_ADVANC_RX_PERF_RESERVE_VALUE1 (0x2) /* If value is received by the network, they shall be interpreted as ‘01’. */ // #define DL_ADVANC_RX_PERF_RESERVE_VALUE2 (0x3) /* If value is received by the network, they shall be interpreted as ‘01’. */ /* * user defined constants */ #define MAX_ADD_RA_CAP (0x4) #define MAX_NUM_ACC_TYPE (0x10) #define MAX_BSIC (0x12) #define MAX_NNC (0x60) #define MAXRTDS6 (0x14) #define MAXRTDS12 (0xa) #define MAXRTD6 (0x8) #define MAXRTD12 (0x6) #define BIT7_MAX (0x80) #define MAX_TDD_CELLS (0x15) #define MAX_FDD_CELLS (0x11) #define MAX_FDD (0x83) #define MAX_TDD (0x83) #define MAX_CDMA2K_NEIGH_CELLS (0x40) #include "CDG_LEAVE.h" #endif