FreeCalypso > hg > fc-magnetite
view cdg3/cdginc-conservative/p_mphp.val @ 695:530f71d65c20
uartfax.c: pull from Tourmaline (GTM900 RI output)
In addition to the primary intent of bringing in GTM900 RI output support,
pulling uartfax.c wholesale from Tourmaline also changes the initial_time
argument in the two NU_Create_Timer() calls from 0 to 1. This change
is required for the new version of Nucleus used in Tourmaline and Selenite
(and apparently also used by TI in LoCosto), and it is harmless (no effect)
for the original TCS211 version of Nucleus used in Magnetite.
The new philosophical model being adopted is that Tourmaline is our new
development head firmware, whereas Magnetite will now be maintained
similarly to how Linux maintainers treat stable kernels: changes will be
backported from Tourmaline if they are deemed appropriate for stable
modem firmware.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 24 Oct 2020 17:33:10 +0000 |
| parents | c15047b3d00d |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_mphp.val | | SOURCE : "sap\mphp.pdf" | | LastModified : "2003-01-13" | | IdAndVersion : "8441.100.03.011" | | SrcFileTime : "Thu Nov 29 09:50:10 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:52:55 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_MPHP_VAL #define P_MPHP_VAL #define CDG_ENTER__P_MPHP_VAL #define CDG_ENTER__FILENAME _P_MPHP_VAL #define CDG_ENTER__P_MPHP_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_MPHP_VAL__LAST_MODIFIED _2003_01_13 #define CDG_ENTER__P_MPHP_VAL__ID_AND_VERSION _8441_100_03_011 #define CDG_ENTER__P_MPHP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_50_10_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_MPHP_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_psi_nr */ #define VAL_PSI_NR___0 (0x0) /* read all PSI */ /* * Value constants for VAL_bs_pbcch_blks */ #define VAL_BS_PBCCH_BLKS___0 (0x0) /* B0 is used for PBCCH */ #define VAL_BS_PBCCH_BLKS___1 (0x1) /* B0, B6 is used for PBCCH */ #define VAL_BS_PBCCH_BLKS___2 (0x2) /* B0, B6, B3 is used for PBCCH */ #define VAL_BS_PBCCH_BLKS___3 (0x3) /* B0, B6, B3, B9 is used for PBCCH */ /* * Value constants for VAL_psi1_rep_period */ /* * Value constants for VAL_relative_pos_array */ /* * Value constants for VAL_hopping */ #define VAL_HOPPING___0 (0x0) /* static */ #define VAL_HOPPING___1 (0x1) /* hopping */ #define MPHP_INT_MEAS_STATIC (0x2) /* static */ #define MPHP_INT_MEAS_HOPPING (0x3) /* hopping */ #define VAL_HOPPING___4 (0x4) /* static */ #define VAL_HOPPING___5 (0x5) /* hopping */ /* * Value constants for VAL_tsc */ /* * Value constants for VAL_tn */ #define VAL_TN___FF (0xff) /* Value not present */ /* * Value constants for VAL_l2_channel */ #define L2_PCHANNEL_PCCCH (0x1) /* PCCCH block */ #define L2_PCHANNEL_PBCCH (0x2) /* PBCCH block */ #define L2_PCHANNEL_PPCH (0x3) /* PPCH block */ #define L2_PCHANNEL_PEPCH (0x4) /* PEPCH block */ #define L2_PCHANNEL_PACCH (0x5) /* PACCH block */ /* * Value constants for VAL_error_flag */ #define VAL_ERROR_FLAG___1 (0x1) /* valid block info */ #define VAL_ERROR_FLAG___0 (0x0) /* invalid block info */ /* * Value constants for VAL_bs_pag_blks_res */ /* * Value constants for VAL_page_mode */ #define PAGE_NORMAL (0x0) /* normal paging */ #define PAGE_EXT (0x1) /* extended paging */ #define PAGE_REORG (0x2) /* paging reorganisation */ /* * Value constants for VAL_nb_carrier */ /* * Value constants for VAL_nmeas */ /* * Value constants for VAL_fn_offset */ /* * Value constants for VAL_time_alignment */ /* * Value constants for VAL_bs_prach_blks */ #define VAL_BS_PRACH_BLKS___0 (0x0) /* No block is reserved for PRACH (default) */ #define VAL_BS_PRACH_BLKS___1 (0x1) /* B0 is used for PRACH */ #define VAL_BS_PRACH_BLKS___2 (0x2) /* B0, B6 is used for PRACH */ #define VAL_BS_PRACH_BLKS___3 (0x3) /* B0, B6, B3 is used for PRACH */ #define VAL_BS_PRACH_BLKS___4 (0x4) /* B0, B6, B3, B9 is used for PRACH */ #define VAL_BS_PRACH_BLKS___5 (0x5) /* B0, B6, B3, B9, B1 is used for PRACH */ #define VAL_BS_PRACH_BLKS___6 (0x6) /* B0, B6, B3, B9, B1, B7 is used for PRACH */ #define VAL_BS_PRACH_BLKS___7 (0x7) /* B0, B6, B3, B9, B1, B7, B4 is used for PRACH */ #define VAL_BS_PRACH_BLKS___8 (0x8) /* B0, B6, B3, B9, B1, B7, B4, B10 is used for PRACH */ #define VAL_BS_PRACH_BLKS___9 (0x9) /* B0, B6, B3, B9, B1, B7, B4, B10, B2 is used for PRACH */ #define VAL_BS_PRACH_BLKS___A (0xa) /* B0, B6, B3, B9, B1, B7, B4, B10, B2, B8 is used for PRACH */ #define VAL_BS_PRACH_BLKS___B (0xb) /* B0, B6, B3, B9, B1, B7, B4, B10, B2, B8, B5 is used for PRACH */ #define VAL_BS_PRACH_BLKS___C (0xc) /* B0, B6, B3, B9, B1, B7, B4, B10, B2, B8, B5, B11 is used for PRACH */ /* * Value constants for VAL_burst_type */ #define ACCESS_8_BIT (0x0) #define ACCESS_11_BIT (0x1) /* * Value constants for VAL_assign_cmd */ #define DL_ASSIGNMENT (0x0) /* Downlink assignment */ #define UL_ASSIGNMENT (0x1) /* Uplink assignment */ #define UL_DL_ASSIGNMENT (0x2) /* Uplink and downlink assignment */ #define UL_TP_ACCESS (0x5) /* Uplink Two Phase Access */ /* * Value constants for VAL_m_class */ /* * Value constants for VAL_repeat_alloc */ #define VAL_REPEAT_ALLOC___0 (0x0) /* cancel any pending repeat allocation */ #define VAL_REPEAT_ALLOC___1 (0x1) /* repeat the current fixed allocation when it ends */ /* * Value constants for VAL_purpose */ #define VAL_PURPOSE___0 (0x0) /* reserved */ #define VAL_PURPOSE___1 (0x1) /* reserved */ #define VAL_PURPOSE___2 (0x2) /* reserved */ #define SINGLE_BLOCK_TRANSFER_DL (0x3) /* todo ??? reception? */ #define SINGLE_BLOCK_TRANSFER_UL (0x4) /* i.e. measurement report */ #define TWO_PHASE_ACESS (0x5) /* two phases access */ /* * Value constants for VAL_ta_value */ #define VAL_TA_VALUE___FF (0xff) /* value not present */ /* * Value constants for VAL_ta_index */ #define VAL_TA_INDEX___FF (0xff) /* value not present */ /* * Value constants for VAL_ul_tfi */ /* * Value constants for VAL_dl_tfi */ /* * Value constants for VAL_mac_mode */ #define DA (0x0) /* Dynamic allocation */ #define EDA (0x1) /* Extended Dynamic allocation */ #define FA (0x2) /* Fixed allocation, not half duplex mode */ #define FA_HD (0x3) /* Fixed allocation, half duplex mode */ /* * Value constants for VAL_usf_gran */ #define VAL_USF_GRAN___0 (0x0) /* the ms shall transmit one RLC/MAC-Block */ #define VAL_USF_GRAN___1 (0x1) /* the ms shall transmit four consecutive RLC/MAC-Block */ /* * Value constants for VAL_dl_ctrl_ts */ /* * Value constants for VAL_size_bitmap */ /* * Value constants for VAL_tbf_start_present */ #define VAL_TBF_START_PRESENT___0 (0x0) /* not present */ #define VAL_TBF_START_PRESENT___1 (0x1) /* present */ /* * Value constants for VAL_pc_meas_chan */ #define MEAS_BCCH (0x0) #define MEAS_PDCH (0x1) /* * Value constants for VAL_tbf_type */ #define REL_DL_TBF (0x0) /* Release only the downlink TBF */ #define REL_UL_TBF (0x1) /* Release only the uplink TBF */ #define REL_ALL_TBF (0x2) /* Release both uplink and downlink TBFs */ /* * Value constants for VAL_poll_resp_type */ #define POLL_RESP_NB_CS1 (0x3) /* normal burst */ #define POLL_RESP_AB_8_BIT (0x7) /* access burst */ #define POLL_RESP_AB_11_BIT (0x8) /* access burst */ /* * Value constants for VAL_sb_status */ #define SB_STAT_OK (0x0) /* In uplink, indicates that the single block was sent. */ #define SB_STAT_DL_CRC_ERROR (0x0) /* In downlink, indicates that the downlink single block was received with no CRC_ERROR. */ #define SB_STAT_STIME_PASSED (0x1) /* Starting time is passed. Single block uplink/downlink was not sent/received. */ #define SB_STAT_TA_INVALID (0x2) /* No valid timing advance. Single block was not sent. */ #define SB_STAT_DL_OK (0x3) /* Valid downlink single block received ( NO CRC_ERROR). */ /* * Value constants for VAL_if_meas_enable */ #define MPHP_IM_DISABLED (0x0) /* interference measurement processing disabled */ #define MPHP_IM_ENABLED (0x1) /* interference measurement processing enabled */ /* * user defined constants */ #define MAX_L2_FRAME_SIZE (0x17) #define MAX_RELATIVE_POS (0x14) #define MPHP_NUMC_MA (0x40) #define MAX_USF_TABLE (0x8) #define MAX_ALLOC_BITMAP (0x7f) #define MPHP_NUMC_BA_GPRS_SC (0x21) #include "CDG_LEAVE.h" #endif