view src/aci2/alr/alr_csf.c @ 695:530f71d65c20

uartfax.c: pull from Tourmaline (GTM900 RI output) In addition to the primary intent of bringing in GTM900 RI output support, pulling uartfax.c wholesale from Tourmaline also changes the initial_time argument in the two NU_Create_Timer() calls from 0 to 1. This change is required for the new version of Nucleus used in Tourmaline and Selenite (and apparently also used by TI in LoCosto), and it is harmless (no effect) for the original TCS211 version of Nucleus used in Magnetite. The new philosophical model being adopted is that Tourmaline is our new development head firmware, whereas Magnetite will now be maintained similarly to how Linux maintainers treat stable kernels: changes will be backported from Tourmaline if they are deemed appropriate for stable modem firmware.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 17:33:10 +0000
parents 5e39123540e6
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-PS
|  Modul   :  alr_CSF
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This Modul defines the customer specific functions.
+-----------------------------------------------------------------------------
*/

#ifndef ALR_CSF_C
#define ALR_CSF_C

#define ENTITY_PL

/*==== INCLUDES ===================================================*/
#include <string.h>
#include <stdlib.h>
#include <ctype.h>
#include "typedefs.h"
#include "pconst.cdg"
#include "mconst.cdg"
#include "message.h"
#include "ccdapi.h"
#include "vsi.h"
#include "custom.h"
#include "gsm.h"
#include "prim.h"
#include "cnf_alr.h"
#include "mon_alr.h"
#include "pei.h"
#include "tok.h"

#include "pcm.h"
#ifdef GPRS
#include "alr_gprs.h"
#endif

#ifdef _TMS470
#include "inth/iq.h"
#include "armio/armio.h"
#endif  /* _TMS470 */

#include "alr.h"


/*==== IMPORT =====================================================*/

/*==== EXPORT =====================================================*/

/*==== PRIVAT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (8403)       MODULE  : alr_CSF                    |
| STATE   : code                ROUTINE : csf_show_version           |
+--------------------------------------------------------------------+

  PURPOSE : Trace Layer 1 DSP version numbers

*/

GLOBAL const void csf_show_version (T_TST_TEST_HW_CON  *ver)
{
#if defined (_TMS470)
  USHORT build, hw, jtag, rev;

  /*
   * Retrieve hardware info and build from library
   */
  hw = 0;

  build = IQ_GetBuild();
  jtag  = IQ_GetJtagId();
  rev   = IQ_GetRevision();

  TRACE_EVENT_P4 ("Build=%04d HW ver=%04X, jtag=%04X, rev=%04X", build, hw, jtag, rev);

  if (ver)
  {
    /*
     * Retrieve Layer 1 info from primitive
     */
    TRACE_EVENT_P3 ("DSP version/patch=%04X, %04x, chksum=%04X",
                    ver->dsp_code_version,
                    ver->dsp_patch_version,
                    ver->dsp_checksum);
    TRACE_EVENT_P3 ("MCU version ALR=%04X, GPRS=%04X, TM=%04X",
                    ver->mcu_alr_version,
                    ver->mcu_gprs_version,
                    ver->mcu_tm_version);
    PFREE (ver);
  }
#else  /* _TMS470  */
  if (ver)
  {
    PFREE (ver);
  }
#endif  /* _TMS470 */
}

#if !defined NTRACE
/*
 * The following monitor capabilities are used by the Condat RT system.
 * They are only included in the trace version of protocol stack.
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)       MODULE  : alr_CSF                    |
| STATE   : code                ROUTINE : trc_mon_counter_idle       |
+--------------------------------------------------------------------+

  PURPOSE : traces the downlink counter values in idle mode if a change
            occur.

*/

UBYTE v_mon_counter_idle = 0;

GLOBAL void trc_mon_counter_idle (UBYTE act_dlt, UBYTE max_dlt)
{
  if (v_mon_counter_idle)
  {
    /*
     * only if monitoring is enabled
     */
    PALLOC (mon_counter_idle, MON_COUNTER_IDLE_IND);

    mon_counter_idle->act_dlt = act_dlt;
    mon_counter_idle->max_dlt = max_dlt;

    PSENDX(RR, mon_counter_idle);
  }
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)       MODULE  : alr_CSF                    |
| STATE   : code                ROUTINE : trc_mon_counter_dedi       |
+--------------------------------------------------------------------+

  PURPOSE : traces the radiolink counter values in dedicated mode
            if a change occur.

*/

UBYTE v_mon_counter_dedi = 0;

GLOBAL void trc_mon_counter_dedi (UBYTE act_rlt, UBYTE max_rlt)
{
  if (v_mon_counter_dedi)
  {
    /*
     * only if monitoring is enabled
     */
    PALLOC (mon_counter_dedi, MON_COUNTER_DEDI_IND);

    mon_counter_dedi->act_rlt = act_rlt;
    mon_counter_dedi->max_rlt = max_rlt;

    PSENDX(RR, mon_counter_dedi);
  }
}

#endif /* !NTRACE */

/*
 * Function added in FreeCalypso to support Openmoko's AT@BAND command
 * without making ACI include ALR header files.
 */

GLOBAL void alr_get_band_of_serving_cell (char *strbuf)
{
    switch(alr_data->sc_band)
    {
    case BAND_GSM_900:
      strcpy(strbuf, "GSM 900");
      break;
    case BAND_DCS_1800:
      strcpy(strbuf, "DCS 1800");
      break;
    case BAND_PCS_1900:
      strcpy(strbuf, "PCS 1900");
      break;
    case BAND_E_GSM:
      strcpy(strbuf, "EGSM");
      break;
    case BAND_GSM_850:
      strcpy(strbuf, "GSM 850");
      break;
    default:
      strcpy(strbuf, "Unknown");
    }
}

#endif