FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_app/lcc/lcc_handle_timers.c @ 695:530f71d65c20
uartfax.c: pull from Tourmaline (GTM900 RI output)
In addition to the primary intent of bringing in GTM900 RI output support,
pulling uartfax.c wholesale from Tourmaline also changes the initial_time
argument in the two NU_Create_Timer() calls from 0 to 1. This change
is required for the new version of Nucleus used in Tourmaline and Selenite
(and apparently also used by TI in LoCosto), and it is harmless (no effect)
for the original TCS211 version of Nucleus used in Magnetite.
The new philosophical model being adopted is that Tourmaline is our new
development head firmware, whereas Magnetite will now be maintained
similarly to how Linux maintainers treat stable kernels: changes will be
backported from Tourmaline if they are deemed appropriate for stable
modem firmware.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 24 Oct 2020 17:33:10 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/****************************************************************************** * Power Task (pwr) * Design and coding by Svend Kristian Lindholm, skl@ti.com * * Timers * * $Id: pwr_handle_timers.c 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $ * ******************************************************************************/ #ifndef __PWR_HANDLE_TIMERS_C_ #define __PWR_HANDLE_TIMERS_C_ UINT32 rvf_get_tick_count(void); void pwr_check_timers(void); T_RVM_RETURN pwr_create_timer(UINT32 *timer_begin); T_RVM_RETURN pwr_start_timer(UINT32 *timer_begin); void stop_ci_charge(void); void pwr_modulate_off(void); void pwr_send_msg(uint32 msg_id ,T_RVF_ADDR_ID src_addr_id, T_RVF_ADDR_ID dest_addr_id); int pwr_capacity(uint16 Vbat); void mmi_send_msg(struct mmi_info_ind_s *event); void end_charging_house_keeping(void); void cv_charging_house_keeping(void); // Timer functions UINT32 pwr_timer_elapsed(UINT32 time_begin, UINT32 current_timer) { // return elapsed time in [ms] return (current_timer - time_begin) * 60 / 13; } T_RVM_RETURN pwr_start_timer(UINT32 *timer_begin) { ttw(ttr(TTrTimer, "pwr_start_timer(%d)" NL, 0)); // Start timer (will be checked each time an ADC measurement is received) *timer_begin = rvf_get_tick_count(); ttw(ttr(TTrTimer, "pwr_start_timer(%d)" NL, 0xFF)); return (RV_OK); } T_RVM_RETURN pwr_stop_timer(UINT32 *timer_begin) { ttw(ttr(TTrTimer, "pwr_stop_timer(%d)" NL, 0)); *timer_begin = 0; ttw(ttr(TTrTimer, "pwr_stop_timer(%d)" NL, 0xFF)); return (RV_OK); } void pwr_stop_timers(void) { // Only stop charging related timers - not supervision timers pwr_stop_timer(&pwr_ctrl->time_begin_T1); pwr_stop_timer(&pwr_ctrl->time_begin_T2); pwr_stop_timer(&pwr_ctrl->time_begin_T3); pwr_stop_timer(&pwr_ctrl->time_begin_T4); pwr_stop_timer(&pwr_ctrl->time_begin_mod_cycle); } T_RVM_RETURN pwr_create_timer(UINT32 *timer_begin) { ttw(ttr(TTrTimer, "pwr_create_timer(%d)" NL, 0)); *timer_begin = 0; ttw(ttr(TTrTimer, "pwr_create_timer(%d)" NL, 0xFF)); return (RV_OK); } T_RV_RET process_pwr_handle_T1_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_T1_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : break; case CCI : case CCV : case LCI : case LCV : // Change state pwr_ctrl->state = SUP; end_charging_house_keeping(); break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_T1_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } ttw(ttr(TTrTimer, "process_pwr_handle_T1_expiration(%d)" NL, 0xFF)); pwr_free(request); } T_RV_RET process_pwr_handle_T2_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_T2_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Another timer did expire prior to the T2 timer - ignore this expiration break; case CCV : case LCV : // Change state pwr_ctrl->state = SUP; end_charging_house_keeping(); break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_T2_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_T2_expiration(%d)" NL, 0xFF)); } T_RV_RET process_pwr_handle_T3_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_T3_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Stop & reset timers pwr_stop_timers(); break; case CCI : case CCV : case LCI : case LCV : break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_T3_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_T3_expiration(%d)" NL, 0xFF)); } T_RV_RET process_pwr_handle_T4_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_T4_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Yes - since timing issues can make this timer expire in SUP state // It can take a long time before we know if a charger has been unplugged break; case CCV : case LCV : pwr_stop_timer(&pwr_ctrl->time_begin_T4); pwr_modulate_off(); // Wait for duty cycle timer to expire before restarting this timer break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_T4_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_T4_expiration(%d)" NL, 0xFF)); } T_RV_RET process_pwr_handle_mod_cycle_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_mod_cycle_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Yes - since timing issues can make this timer expire in SUP state // It can take a long time before we know if a charger has been unplugged break; case CCV : case LCV : // Calculate k value // Start DC timer // Start T4 timer based on k value // Modulation ON cv_charging_house_keeping(); break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_mod_cycle_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_mod_cycle_expiration(%d)" NL, 0xFF)); } T_RV_RET process_pwr_handle_mmi_info_expiration(T_PWR_REQ *request) { struct mmi_info_ind_s MMI_Event; ttw(ttr(TTrTimer, "process_pwr_handle_mmi_info_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Send MMI info events according to configured repetition interval if (pwr_ctrl->flag_mmi_registered == 1) { pwr_ctrl->mmi_ptr->header.msg_id = MMI_BAT_SUPERVISION_INFO_IND; pwr_ctrl->mmi_ptr->Vbat = pwr_cfg->data.Vbat_avg_mV; pwr_ctrl->mmi_ptr->Tbat = pwr_cfg->data.Tbat_avg; pwr_ctrl->mmi_ptr->Cbat = pwr_capacity(pwr_cfg->data.Vbat_avg_mV); mmi_send_msg(pwr_ctrl->mmi_ptr); } // Restart timer ttw(ttr(TTrTimerLow,"MMI info timer started(%d)" NL, 0)); pwr_start_timer(&pwr_ctrl->time_begin_mmi_rep); break; case INI : case CCI : case CCV : case LCI : case LCV : // DON'T send any events when charging or initializing break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_mmi_info_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_mmi_info_expiration(%d)" NL, 0xFF)); } void pwr_check_timers() { UINT32 timer; ttw(ttr(TTrTimer, "pwr_check_timers(%d)" NL, 0)); // Check timers T1, T2, T3, T4, duty cycle & mmi timer - if expired send timer expired events timer = rvf_get_tick_count(); // T1 if (pwr_ctrl->time_begin_T1 != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_T1 = pwr_timer_elapsed(pwr_ctrl->time_begin_T1, timer); if (pwr_ctrl->time_elapsed_T1 > pwr_cfg->bat.T1) { // EXPIRED! ttw(ttr(TTrTimer, "T1 expired (%d):" NL, pwr_ctrl->time_elapsed_T1)); // 'Stop' timer pwr_ctrl->time_elapsed_T1 = 0; pwr_ctrl->time_begin_T1 = 0; // Send timer expired event pwr_send_msg(TIMER_T1_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // T2 if (pwr_ctrl->time_begin_T2 != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_T2 = pwr_timer_elapsed(pwr_ctrl->time_begin_T2, timer); if (pwr_ctrl->time_elapsed_T2 > pwr_cfg->bat.T2) { // EXPIRED! ttw(ttr(TTrTimer, "T2 expired (%d):" NL, pwr_ctrl->time_elapsed_T2)); // 'Stop' timer pwr_ctrl->time_elapsed_T2 = 0; pwr_ctrl->time_begin_T2 = 0; // Send timer expired event pwr_send_msg(TIMER_T2_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // T3 if (pwr_ctrl->time_begin_T3 != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_T3 = pwr_timer_elapsed(pwr_ctrl->time_begin_T3, timer); if (pwr_ctrl->time_elapsed_T3 > pwr_cfg->bat.T3) { // EXPIRED! ttw(ttr(TTrTimer, "T3 expired (%d):" NL, pwr_ctrl->time_elapsed_T3)); // 'Stop' timer pwr_ctrl->time_elapsed_T3 = 0; pwr_ctrl->time_begin_T3 = 0; // Send timer expired event pwr_send_msg(TIMER_T3_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // T4 if (pwr_ctrl->time_begin_T4 != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_T4 = pwr_timer_elapsed(pwr_ctrl->time_begin_T4, timer); if (pwr_ctrl->time_elapsed_T4 > pwr_cfg->data.T4) { // EXPIRED! ttw(ttr(TTrTimer, "T4 expired (%d):" NL, pwr_ctrl->time_elapsed_T4)); // 'Stop' timer pwr_ctrl->time_elapsed_T4 = 0; pwr_ctrl->time_begin_T4 = 0; // Send timer expired event pwr_send_msg(TIMER_T4_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // Duty cycle timer (Lithium only) if (pwr_ctrl->time_begin_mod_cycle != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_mod_cycle = pwr_timer_elapsed(pwr_ctrl->time_begin_mod_cycle, timer); if (pwr_ctrl->time_elapsed_mod_cycle > pwr_cfg->common.mod_cycle) { // EXPIRED! ttw(ttr(TTrTimer, "DC expired (%d):" NL, pwr_ctrl->time_elapsed_mod_cycle)); // 'Stop' timer pwr_ctrl->time_elapsed_mod_cycle = 0; pwr_ctrl->time_begin_mod_cycle = 0; // Send timer expired event pwr_send_msg(TIMER_MOD_CYCLE_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // MMI repetition timer if (pwr_ctrl->time_begin_mmi_rep != 0) { // Started - but has it expired? pwr_ctrl->time_elapsed_mmi_rep = pwr_timer_elapsed(pwr_ctrl->time_begin_mmi_rep, timer); if (pwr_ctrl->time_elapsed_mmi_rep > pwr_cfg->mmi.repetition) { // EXPIRED! // 'Stop' timer pwr_ctrl->time_elapsed_mmi_rep = 0; pwr_ctrl->time_begin_mmi_rep = 0; ttw(ttr(TTrTimer, "MMI info timer expired (%d):" NL, pwr_ctrl->time_elapsed_mmi_rep)); // Send timer expired event pwr_send_msg(TIMER_MMI_INFO_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } ttw(ttr(TTrTimer, "pwr_check_timers(%d)" NL, 0xFF)); } #endif