FreeCalypso > hg > fc-magnetite
view src/cs/layer1/tm_include/l1tm_signa.h @ 695:530f71d65c20
uartfax.c: pull from Tourmaline (GTM900 RI output)
In addition to the primary intent of bringing in GTM900 RI output support,
pulling uartfax.c wholesale from Tourmaline also changes the initial_time
argument in the two NU_Create_Timer() calls from 0 to 1. This change
is required for the new version of Nucleus used in Tourmaline and Selenite
(and apparently also used by TI in LoCosto), and it is harmless (no effect)
for the original TCS211 version of Nucleus used in Magnetite.
The new philosophical model being adopted is that Tourmaline is our new
development head firmware, whereas Magnetite will now be maintained
similarly to how Linux maintainers treat stable kernels: changes will be
backported from Tourmaline if they are deemed appropriate for stable
modem firmware.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 24 Oct 2020 17:33:10 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1TM_SIGNA.H * * Filename l1tm_signa.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #define P_TMODE ( P_L1C + 3 ) // keep compatibility with GPRS code //TestMode #define TMODE_RXLEV_REQ ( ( P_TMODE << 8 ) | 1 ) #define TMODE_RXLEV_IND ( ( P_TMODE << 8 ) | 2 ) #define TMODE_STOP_RXLEV_CON ( ( P_TMODE << 8 ) | 3 ) #define TMODE_FB0_REQ ( ( P_TMODE << 8 ) | 4 ) #define TMODE_FB1_REQ ( ( P_TMODE << 8 ) | 5 ) #define TMODE_SB_REQ ( ( P_TMODE << 8 ) | 6 ) #define TMODE_FB_CON ( ( P_TMODE << 8 ) | 7 ) #define TMODE_SB_CON ( ( P_TMODE << 8 ) | 8 ) #define TMODE_BCCHS_CON ( ( P_TMODE << 8 ) | 9 ) #define TMODE_RA_START ( ( P_TMODE << 8 ) | 10 ) #define TMODE_RA_DONE ( ( P_TMODE << 8 ) | 11 ) #define TMODE_SCELL_NBCCH_REQ ( ( P_TMODE << 8 ) | 12 ) #define TMODE_STOP_SCELL_BCCH_REQ ( ( P_TMODE << 8 ) | 13 ) #define TMODE_NEW_SCELL_REQ ( ( P_TMODE << 8 ) | 14 ) #define TMODE_TCH_REQ ( ( P_TMODE << 8 ) | 15 ) #define TMODE_IMMED_ASSIGN_REQ ( ( P_TMODE << 8 ) | 16 ) #define TMODE_IMMED_ASSIGN_CON ( ( P_TMODE << 8 ) | 17 ) #define TMODE_STOP_RX_TX ( ( P_TMODE << 8 ) | 18 ) #define TMODE_SACCH_INFO ( ( P_TMODE << 8 ) | 19 ) #define TESTMODE_PRIM ( ( P_TMODE << 8 ) | 20 ) #define TMODE_FB_SB_REQ ( ( P_TMODE << 8 ) | 21 ) #define TMODE_NETWORK_SYNC_IND ( ( P_TMODE << 8 ) | 22 ) #define TMODE_TCH_INFO ( ( P_TMODE << 8 ) | 23 ) #if L1_GPRS #define TMODE_PDTCH_ASSIGN_REQ ( ( P_TMODE << 8 ) | 24 ) #define TMODE_PDTCH_INFO ( ( P_TMODE << 8 ) | 25 ) #endif // #define TMODE_RXLEV_REQ ( ( P_TMODE << 8 ) | 24 ) // #define TMODE_RXLEV_IND ( ( P_TMODE << 8 ) | 25 )