FreeCalypso > hg > fc-magnetite
view src/cs/riviera/rvt/rvt_gen.h @ 695:530f71d65c20
uartfax.c: pull from Tourmaline (GTM900 RI output)
In addition to the primary intent of bringing in GTM900 RI output support,
pulling uartfax.c wholesale from Tourmaline also changes the initial_time
argument in the two NU_Create_Timer() calls from 0 to 1. This change
is required for the new version of Nucleus used in Tourmaline and Selenite
(and apparently also used by TI in LoCosto), and it is harmless (no effect)
for the original TCS211 version of Nucleus used in Magnetite.
The new philosophical model being adopted is that Tourmaline is our new
development head firmware, whereas Magnetite will now be maintained
similarly to how Linux maintainers treat stable kernels: changes will be
backported from Tourmaline if they are deemed appropriate for stable
modem firmware.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 24 Oct 2020 17:33:10 +0000 |
parents | 6cea809631d7 |
children |
line wrap: on
line source
/******************************************************************************* * * tr_gen.h * * This file contain general definitions of Trace Module. * Definitions are exportable * * (C) Texas Instruments, all rights reserved * * Version number : 0.1 * * History : 0.1 (7/4/2000) - Created * * Date : 7/4/2000 * * Author : Cristian Livadiotti, c-livadiotti@ti.com * ******************************************************************************/ #ifndef __RVT_GEN_H__ #define __RVT_GEN_H__ #include "rv/general.h" /* ** If TRACE_MODULE is defined, the trace is using the trace task API. ** Otherwise, the trace is using the RVF. NOW OBSOLETE !!!!!!!! */ //#define TRACE_MODULE /* ** If FRAMING_PROTOCOL is defined, the trace mux should be used because of encapsulation and byte stuffing. ** Otherwise, the hyperterminal should be used. */ #define FRAMING_PROTOCOL /* ** If MIXED_TRACE is defined, all traces are mixed on the same UART and the ** trace task handles the RX commands. */ //#define MIXED_TRACE /* ** Type definitions */ /* Define return parameters. */ typedef enum { RVT_OK = 0, RVT_NOT_SUPPORTED = -2, RVT_NOT_READY = -3, RVT_MEMORY_ERR = -4, RVT_INTERNAL_ERR = -9, RVT_INVALID_PARAMETER = -10 } T_RVT_RET; typedef UINT8 T_RVT_USER_ID; typedef UINT32 T_RVT_MSG_LG; typedef enum { RVT_ASCII_FORMAT, // 0 RVT_BINARY_FORMAT // 1 } T_RVT_FORMAT; typedef UINT8 * T_RVT_BUFFER; typedef char T_RVT_NAME; #define RVT_NAME_MAX_LEN (10) #define RVT_RV_HEADER 0x11 #define RVT_L1_HEADER 0x12 #define RVT_L23_HEADER 0x13 #define RVT_TM_HEADER 0x14 #define RVT_RNET_HEADER 0x15 #define RVT_PROF_HEADER 0x16 #define RVT_GTTBACK_HEADER 0x17 #define RVT_OTHER_HEADER 0x18 /* FreeCalypso additions */ #define RVT_AT_HEADER 0x1A #define RVT_EXTUI_HEADER 0x1B #define RVT_TCH_HEADER 0x1C #define RVT_KEEPALIVE_HEADER 0x1D /* end of FreeCalypso additions */ #define RVT_INVALID_HEADER 0xFF typedef void (*RVT_CALLBACK_FUNC)(T_RVT_BUFFER, UINT16); /********* Fonction Prototypes ***********/ void rvt_set_trace_level(T_RVT_BUFFER p_msg, UINT16 msg_length); T_RVT_RET rvt_send_trace_no_cpy(T_RVT_BUFFER p_buffer, T_RVT_USER_ID user_id, T_RVT_MSG_LG msg_lenght, T_RVT_FORMAT msg_format); T_RVT_RET rvt_send_trace_cpy(T_RVT_BUFFER msg, T_RVT_USER_ID user_id, T_RVT_MSG_LG msg_length, T_RVT_FORMAT msg_format); T_RVT_RET rvt_register_id(T_RVT_NAME name[], T_RVT_USER_ID *tr_id, RVT_CALLBACK_FUNC callback); T_RVT_RET rvt_mem_alloc(T_RVT_USER_ID user_id, T_RVT_MSG_LG buffer_lenght, T_RVT_BUFFER * buff); T_RVT_RET rvt_mem_free(T_RVT_BUFFER msg); #endif