FreeCalypso > hg > fc-magnetite
view src/cs/system/main/init.asm @ 695:530f71d65c20
uartfax.c: pull from Tourmaline (GTM900 RI output)
In addition to the primary intent of bringing in GTM900 RI output support,
pulling uartfax.c wholesale from Tourmaline also changes the initial_time
argument in the two NU_Create_Timer() calls from 0 to 1. This change
is required for the new version of Nucleus used in Tourmaline and Selenite
(and apparently also used by TI in LoCosto), and it is harmless (no effect)
for the original TCS211 version of Nucleus used in Magnetite.
The new philosophical model being adopted is that Tourmaline is our new
development head firmware, whereas Magnetite will now be maintained
similarly to how Linux maintainers treat stable kernels: changes will be
backported from Tourmaline if they are deemed appropriate for stable
modem firmware.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 24 Oct 2020 17:33:10 +0000 |
parents | a7ed7d4483b0 |
children |
line wrap: on
line source
;****************************************************************************** ; TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION ; ; Property of Texas Instruments -- For Unrestricted Internal Use Only ; Unauthorized reproduction and/or distribution is strictly prohibited. This ; product is protected under copyright law and trade secret law as an ; unpublished work. Created 1987, (C) Copyright 1996 Texas Instruments. All ; rights reserved. ; ; ; Filename : init.asm ; ; Description : Environment configuration ; ; Project : drivers ; ; Author : pmonteil@tif.ti.com Patrice Monteil. ; ; Version number : 1.4 ; ; Date and time : 03/06/01 10:44:19 ; ; Previous delta : 12/19/00 14:28:47 ; ; SCCS file : /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release_gprs/mod/emu_p/EMU_P_C_SAMPLE_REQ1145_BIS/drivers1/board_7/SCCS/s.init.asm ; ; Sccs Id (SID) : '@(#) init.asm 1.4 03/06/01 10:44:19 ' ; ; ;***************************************************************************** ; use in int.s for first initializations .if BOARD = 6 .if CHIPSET != 12 CS0_MEM_REG .short 0x2A0 ;ROM init : 0 WS, 16 bits, little CS1_MEM_REG .short 0x281 ;RAM init : 1 WS, 8 bits, little CS2_MEM_REG .short 0x2A1 ;RAM init : 1 WS, 16 bits, little CS3_MEM_REG .short 0x283 ;RAM init : 5 WS, 8 bits, little CS4_MEM_REG .short 0xe85 ;RAM init : 5 WS, 8 bits, little .endif .if CHIPSET = 3 CS6_MEM_REG .short 0x0C0 ;Internal RAM init : 0 WS, 32 bits, little, write enable .elseif CHIPSET = 4 CS6_MEM_REG .short 0x0C0 ;Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x0C0 ;Internal RAM init : 0 WS, 32 bits, little, write enable .elseif CHIPSET = 5 CS6_MEM_REG .short 0x0C0 ;Internal RAM init : 0 WS, 32 bits, little, write enable .elseif CHIPSET = 6 CS6_MEM_REG .short 0x0C0 ;Internal RAM init : 0 WS, 32 bits, little, write enable .elseif CHIPSET = 7 CS6_MEM_REG .short 0x0C0 ;Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x040 ;Internal BOOT ROM init : 0 WS, 32 bits, little, write disable .elseif CHIPSET = 8 CS6_MEM_REG .short 0x0C0 ;Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x040 ;Internal BOOT ROM init : 0 WS, 32 bits, little, write disable .elseif CHIPSET = 10 CS6_MEM_REG .short 0x0C0 ;Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x040 ;Internal BOOT ROM init : 0 WS, 32 bits, little, write disable .elseif CHIPSET = 11 CS6_MEM_REG .short 0x0C0 ;Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x040 ;Internal BOOT ROM init : 0 WS, 32 bits, little, write disable .elseif CHIPSET = 12 CS0_MEM_REG .short 0x2A1 ;CALYPSO PLUS TEST MODE - TO BE ERASED - RAM init : 1 WS, 16 bits, little CS4_MEM_REG .short 0x2A1 ;RAM init : 1 WS, 16 bits, little CS5_MEM_REG .short 0x2A1 ;ROM init : 0 WS, 16 bits, little .endif ; CHIPSET = 3, 4, 5, 6, 7, 8, 10 or 11 or 12 .elseif BOARD = 7 CS0_MEM_REG .short 0x2a1 ; 1 Dummy Cycle 16 bit 1 WS SW BP enable .if OP_WCP = 1 CS1_MEM_REG .short 0x2a1 ; 1 Dummy Cycle 16 bit 0 WS SW BP enable .else CS1_MEM_REG .short 0x2a0 ; 1 Dummy Cycle 16 bit 0 WS SW BP enable .endif CS2_MEM_REG .short 0x2a1 ; 1 Dummy Cycle 16 bit 1 WS SW BP enable CS3_MEM_REG .short 0x283 ; 1 Dummy Cycle 8 bit 3 WS SW BP enable CS4_MEM_REG .short 0x281 ; 1 Dummy Cycle 8 bit 1 WS SW BP enable .if CHIPSET = 3 CS6_MEM_REG .short 0x2c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable .elseif CHIPSET = 4 CS6_MEM_REG .short 0x0c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x0c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable .elseif CHIPSET = 5 CS6_MEM_REG .short 0x0c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable .elseif CHIPSET = 6 .if OP_WCP = 1 CS6_MEM_REG .short 0x2c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable .else CS6_MEM_REG .short 0x0c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable .endif .endif ; CHIPSET = 3, 4, 5 or 6 .elseif BOARD = 8 CS0_MEM_REG .short 0x2a0 ; 1 Dummy Cycle 16 bit 0 WS SW BP enable CS1_MEM_REG .short 0x2a1 ; 1 Dummy Cycle 16 bit 1 WS SW BP enable CS2_MEM_REG .short 0x2a1 ; 1 Dummy Cycle 16 bit 1 WS SW BP enable CS3_MEM_REG .short 0x283 ; 1 Dummy Cycle 8 bit 3 WS SW BP enable CS4_MEM_REG .short 0xe85 ; default reset value .if CHIPSET = 4 CS6_MEM_REG .short 0x0c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x0c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable .elseif CHIPSET = 7 CS6_MEM_REG .short 0x0c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x040 ; Internal BOOT ROM init : 0 WS, 32 bits, little, write disable .elseif CHIPSET = 8 CS6_MEM_REG .short 0x0c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x040 ; Internal BOOT ROM init : 0 WS, 32 bits, little, write disable .endif ; CHIPSET = 4, 7 or 8 .elseif BOARD = 9 CS0_MEM_REG .short 0x2a1 ; 1 Dummy Cycle 16 bit 1 WS SW BP enable CS1_MEM_REG .short 0x2a1 ; 1 Dummy Cycle 16 bit 1 WS SW BP enable CS2_MEM_REG .short 0x2a1 ; 1 Dummy Cycle 16 bit 1 WS SW BP enable CS3_MEM_REG .short 0x283 ; 1 Dummy Cycle 8 bit 3 WS SW BP enable CS4_MEM_REG .short 0xe85 ; default reset value .if CHIPSET = 4 CS6_MEM_REG .short 0x0c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x0c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable .elseif CHIPSET = 7 CS6_MEM_REG .short 0x2c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x040 ; Internal BOOT ROM init : 0 WS, 32 bits, little, write disable .elseif CHIPSET = 8 CS6_MEM_REG .short 0x2c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x040 ; Internal BOOT ROM init : 0 WS, 32 bits, little, write disable .endif ; CHIPSET = 4, 7 or 8 .elseif BOARD = 35 CS0_MEM_REG .short 0x7C0 ; 7 WS, 32 bits, write enabled CS1_MEM_REG .short 0x7C0 ; 7 WS, 32 bits, write enabled CS2_MEM_REG .short 0x7C0 ; 7 WS, 32 bits, write enabled CS6_MEM_REG .short 0x7C0 ; 7 WS, 32 bits, write enabled CS7_MEM_REG .short 0x7C0 ; 7 WS, 32 bits, write enabled API_ADAPT .equ 0x6A CS7_SIZE .equ 0x2000 ; 8 kB CS7_ADDR .equ 0x03800000 ; Initial address before toggling nIBOOT SRAM_ADDR .equ 0x00800000 ; Internal SRAM start address SRAM_SIZE .equ 0x00050000 ; 2.5 MBits armio_in .word 0xFFFE4800 ; ARMIO_IN register address armio_out .word 0xFFFE4802 ; ARMIO_OUT register address addrExtraConf .word 0xFFFFFB10 ; Extra configuration addrCS7 .word 0xFFFFFB08 ; CS7 configuration DEF_EXTRA_CONF .short 0x033E ; Default configuration EXTRA_CONF .short 0x013E ; Boot configuration .elseif BOARD = 40 CS0_MEM_REG .short 0x2a1 ; 1 Dummy Cycle 16 bit 0 WS SW BP enable CS1_MEM_REG .short 0x2a1 ; 1 Dummy Cycle 16 bit 1 WS SW BP enable CS2_MEM_REG .short 0x2a1 ; 1 Dummy Cycle 16 bit 1 WS SW BP enable CS3_MEM_REG .short 0x283 ; 1 Dummy Cycle 8 bit 3 WS SW BP enable CS4_MEM_REG .short 0xe85 ; default reset value .if CHIPSET = 8 CS6_MEM_REG .short 0x0c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x040 ; Internal BOOT ROM init : 0 WS, 32 bits, little, write disable .elseif CHIPSET = 10 CS6_MEM_REG .short 0x0c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x040 ; Internal BOOT ROM init : 0 WS, 32 bits, little, write disable .elseif CHIPSET = 11 CS6_MEM_REG .short 0x0c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x040 ; Internal BOOT ROM init : 0 WS, 32 bits, little, write disable .endif ; CHIPSET = 8, 10 or 11 .elseif BOARD = 41 ; FreeCalypso change, please see MEMIF-wait-states document ; in the freecalypso-docs repository for the explanation. .if VCXO_26MHZ = 1 CS0_MEM_REG .short 0x2a2 ; 1 Dummy Cycle 16 bit 2 WS SW BP enable CS1_MEM_REG .short 0x2a2 ; 1 Dummy Cycle 16 bit 2 WS SW BP enable CS2_MEM_REG .short 0x2a2 ; 1 Dummy Cycle 16 bit 2 WS SW BP enable .else CS0_MEM_REG .short 0x2a1 ; 1 Dummy Cycle 16 bit 1 WS SW BP enable CS1_MEM_REG .short 0x2a1 ; 1 Dummy Cycle 16 bit 1 WS SW BP enable CS2_MEM_REG .short 0x2a1 ; 1 Dummy Cycle 16 bit 1 WS SW BP enable .endif CS3_MEM_REG .short 0x283 ; 1 Dummy Cycle 8 bit 3 WS SW BP enable CS4_MEM_REG .short 0xe85 ; default reset value .if CHIPSET = 8 CS6_MEM_REG .short 0x2c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x040 ; Internal BOOT ROM init : 0 WS, 32 bits, little, write disable .elseif CHIPSET = 10 CS6_MEM_REG .short 0x2c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x040 ; Internal BOOT ROM init : 0 WS, 32 bits, little, write disable .elseif CHIPSET = 11 CS6_MEM_REG .short 0x2c0 ; Internal RAM init : 0 WS, 32 bits, little, write enable CS7_MEM_REG .short 0x040 ; Internal BOOT ROM init : 0 WS, 32 bits, little, write disable .endif ; CHIPSET = 8, 10 or 11 .elseif BOARD = 43 .if CHIPSET = 12 CS0_MEM_REG .short 0x2A0 ;CALYPSO PLUS TEST MODE - TO BE ERASED BOARD 43 init.asm - RAM init : 1 WS, 16 bits, little CS4_MEM_REG .short 0x2A1 ;RAM init : 1 WS, 16 bits, little CS5_MEM_REG .short 0x2A0 ;ROM init : 0 WS, 16 bits, little .endif ; CHIPSET = 12 .elseif BOARD = 45 .if CHIPSET = 12 CS0_MEM_REG .short 0x2A1 ;CALYPSO PLUS TEST MODE - TO BE ERASED BOARD 43 init.asm - RAM init : 1 WS, 16 bits, little CS4_MEM_REG .short 0x2A1 ;RAM init : 1 WS, 16 bits, little CS5_MEM_REG .short 0x2A1 ; init : 0 WS, 16 bits, little .endif ; CHIPSET = 12 .endif ; BOARD CLKM_MEM_REG .equ 0x31 ;the same define INIT_CLKM_ARM_CLK = 0x1031 for InitArmAfterReset CTL_MEM_REG .short 0x02a ; rhea strobe 0/1 + API access size adaptation