view src/gpf3/inc/pcon.h @ 695:530f71d65c20

uartfax.c: pull from Tourmaline (GTM900 RI output) In addition to the primary intent of bringing in GTM900 RI output support, pulling uartfax.c wholesale from Tourmaline also changes the initial_time argument in the two NU_Create_Timer() calls from 0 to 1. This change is required for the new version of Nucleus used in Tourmaline and Selenite (and apparently also used by TI in LoCosto), and it is harmless (no effect) for the original TCS211 version of Nucleus used in Magnetite. The new philosophical model being adopted is that Tourmaline is our new development head firmware, whereas Magnetite will now be maintained similarly to how Linux maintainers treat stable kernels: changes will be backported from Tourmaline if they are deemed appropriate for stable modem firmware.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 17:33:10 +0000
parents c41a534f33c6
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :
|  Modul   : pcon.h
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  Condat Coder Decoder For Primitives
|             Global function prototypes
+-----------------------------------------------------------------------------
*/


#ifndef PCON_H
#define PCON_H

#define PCON_LITTLE            1
#define PCON_BIG               2

#define PCON_OK              0
#define PCON_INVALID_OPC     1      /* operation code of primitive not defined */
#define PCON_INVALID_CNT     2      /* wrong number of entries of an variable long array */
#define PCON_INVALID_OFFS    3      /* wrong sum of l_buf and o_buf of an sdu */
#define PCON_INVALID_TYPE    4      /* wrong entry in pvar table */
#define PCON_INVALID_INIT    5      /* wrong initialization */
#define PCON_INVALID_UTAG    6      /* union controller too large */
#define PCON_NO_MEM          7      /* out of memory */
#define PCON_CCDDATA_ERROR   8      /* wrong ccddata format */
#define PCON_INVALID_PTR     9      /* user supplied null pointer for a
                                       mandatory element */
#define PCON_INVALID_VALFLAG 10     /* user supplied valid flag that is neither
                                       1 nor 0 */
#define PCON_INVALID_VALUE   11     /* user supplied value for basetype not
                                       defined in specification */
#define PCON_INVALID_PATH    12     /* component path for prim not found */

#define PCON_CONFIG_PRIM     23     /* primitive was for internal use of PCON,
                                     * not to be relayed to stack
                                     */
#ifdef _TOOLS_
#define PCON_DLLFUNC_ERROR   24      /* could not find a function in pcon.dll */
#define PCON_STRING_END      25      /* command string end reached */
#endif /* _TOOLS_ */

#define PCON_NOT_PRES        0xFFFF
#define PCON_NOT_INCL        0xFFFE

#if !defined (CCDDATA_PREF)
#if defined (_TOOLS_) && defined (CCDDATA_LOAD)
#define CCDDATA_PREF(pcon_fun) cddl_##pcon_fun
#else
#define CCDDATA_PREF(pcon_fun) pcon_fun
#endif /* _TOOLS_ && CCDDATA_LOAD */
#endif /* !CCDDATA_PREF */

typedef struct
{
#ifdef _TOOLS_
  ULONG (*init_prim_coding) (T_HANDLE, UBYTE);
  ULONG (*decode_prim)      (ULONG, void **, void *, ULONG *, ULONG);
  ULONG (*code_prim)        (ULONG, void *, void **, ULONG *, ULONG, char*);
  ULONG (*make_filter)      (char *, void **);
#else
  ULONG (*init_prim_coding) (T_HANDLE, UBYTE);
  ULONG (*decode_prim)      (ULONG, void **, void *, ULONG *, ULONG);
  ULONG (*code_prim)        (ULONG, void *, void **, ULONG *, ULONG, char*);
  ULONG (*pcheck)           (ULONG, void *);
#endif
  int stack_offset;
} T_PCON_PROPERTIES;

typedef struct
{
  USHORT struct_level;  /* the substructure level within the structure, where
                         * the counting started from */
  USHORT cnt_sub_elems; /* the counter of structure subelements */
  BOOL   count_subs ;   /* flag whether sub elements should be counted */
} T_SUB_ELEM_COUNT;

#define PCON_STACK_OFFSET   3072


#ifndef PCON_C
/*
 * function prototypes
 */
extern ULONG CCDDATA_PREF(pcon_init_prim_coding)(T_HANDLE caller, UBYTE format);

extern ULONG CCDDATA_PREF(pcon_decodePrim) (ULONG opc,
                                            void ** decoded_prim,
                                            void * coded_prim,
                                            ULONG * length,
                                            ULONG woff);

extern ULONG CCDDATA_PREF(pcon_codePrim)  (ULONG opc,
                                           void * decoded_prim,
                                           void ** coded_prim,
                                           ULONG * length,
                                           ULONG woff,
                                           char* receiver);

#ifdef _TOOLS_
extern ULONG CCDDATA_PREF(pcon_init_ccddata)(void);
/*
 * The format for the command string in pcon_make_filter is:
 * [<receiver> [<opc>|<primname> [+|-<elem_pathnames>]]]
 * With <elem_pathnames>: <elem_pathname>[,<elem_pathnames]
 * and <elem_pathname> is the unique path of and element in a
 * primitive, with the structure member names separated by '.'.
 * Examples:
 * "TAP ENT_FOO_IND +struct_3.elem_2,struct_1.substruct_0.elem_1" - Set filter
 *   if primitive ENT_FOO_IND if sent to TAP for the two elements elem_2 in
 *   struct_3 and elem_1 in substruct_0 in struct_1.
 * "TAP 800000AF1 +struct_3.elem_2,struct_1.substruct_0.elem_1" - same for given
 *   opc instead of prim name.
 * "TAP ENT_FOO_IND -struct_3.elem_2,struct_1.substruct_0.elem_1" - Set filter
 *   for all other elements than two given here
 * "TAP ENT_FOO_IND" - Delete filter setting for primitive ENT_FOO_IND
 *   sent to TAP
 * "TAP" - Delete all filter settings for any primitive sent to TAP
 * "" - Delete all filter settings
 */
extern ULONG CCDDATA_PREF(pcon_make_filter)(char* string, void** prim);
extern ULONG CCDDATA_PREF(pcon_filter_decode_prim) (ULONG opc,
                                                    void** decoded_prim,
                                                    void* coded_prim,
                                                    ULONG* length,
                                                    ULONG woff,
                                                    void** shadow_prim);
#else
extern ULONG pcon_pcheck  (ULONG opc, void * decoded_prim);
#endif /* _TOOLS_ */

#endif /* !PCON_C */

#endif