FreeCalypso > hg > fc-magnetite
view cdg3/sap/8010_153_cause_include.pdf @ 438:53f32098ea36
configs/hybrid-ui: switch to the new TCS3 versions of BMI and MFW
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 22 Jan 2018 01:22:02 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : 8010_153_cause_include.pdf ;*** Creation : Wed Mar 11 09:57:55 CST 2009 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : 8010_153_cause_include ;*** Document No. : 8010.153.04.032 ;*** Document Date : 2004-11-30 ;*** Document Status: SUBMITTED ;*** Document Author: JOJ ;******************************************************************************** PRAGMA SRC_FILE_TIME "Thu Nov 29 09:29:16 2007" PRAGMA LAST_MODIFIED "2004-11-30" PRAGMA ID_AND_VERSION "8010.153.04.032" PRAGMA PREFIX CAUSE ; Prefix for this document PRAGMA ALLWAYS_ENUM_IN_VAL_FILE YES ; Enumeration values in value file PRAGMA ENABLE_GROUP NO ; Disable h-file grouping PRAGMA COMPATIBILITY_DEFINES NO ; Compatible to the old #defines VALTAB VAL_cc_cause VAL 0x001D CC_FACILITY_REJECT "facility rejected (originated by MS)" VAL 0x0041 CC_BEARER_NOT_IMPLEM "bearer service not implemented (originated by MS)" VAL 0x0051 CC_INVALID_TI "invalid transaction identifier value (originated by MS)" VAL 0x0058 CC_INCOMPAT_DEST "incompatible destination (originated by MS)" VAL 0x0060 CC_INVALID_MAND_INFO "invalid mandatory information (originated by MS)" VAL 0x0065 CC_MESSAGE_INCOMPAT "message not compatible with protocol state (originated by MS)" VAL 0x0066 CC_TIMER "recovery on timer expiry (originated by MS)" VAL 0x0001 CC_MODIFY_SUCCESS "in-call modification successfully performed, MODIFY COMPLETE message received" VAL 0x0002 CC_HOLD_SUCCESS "hold successfully performed, HOLD ACKNOWLEDGE message received" VAL 0x0003 CC_RETRIEVE_SUCCESS "retrieve successfully performed, RETRIEVE ACKNOWLEDGE message received" VAL 0x0004 CC_DTMF_START_SUCCESS "start of DTMF successfully performed, START DTMF ACKNOWLEDGE message received" VAL 0x0005 CC_NO_NET_CAUSE "network initiated without cause" VAL 0x0006 CC_SUCCESS "operation successfully performed (e.g. a call establishment); this cause is used only if no more specific cause applies" VAL 0x0007 CC_DTMF_NOT_ALLOWED "DTMF is currently not allowed (no speech TCH)" VAL 0x0008 CC_DTMF_BUFFER_FULL "DTMF storage buffer overflow" VAL 0x0009 CC_DTMF_ABORTED "DTMF was aborted (e.g. due to state change)" VAL 0x0010 CC_MAX_NO_CALLS_REACHED "maximum number of calls was reached" VAL 0x0011 CC_MAX_NO_RECALLS_REACHED "maximum number of recalls (CCBS) was reached" VAL 0x0012 CC_CHANNEL_SYNC "channel mode or type information (changed)" VAL 0x0013 CC_REEST_STARTED "call re-establishment started" VAL 0x0014 CC_REEST_FINISHED "call re-establishment is finished" VAL 0x0015 CC_DTMF_STOP_SUCCESS "stop of DTMF successfully performed, STOP DTMF ACKNOWLEDGE message received" VAL 0x00FF CC_NO_ERROR "Equal to NOT_PRESENT_8BIT" VALTAB VAL_nwcc_cause VAL 0x0001 NWCC_UNASSIGN "unassigned (unallocated) number" VAL 0x0003 NWCC_NO_ROUTE "no route to destination" VAL 0x0006 NWCC_CHAN_UNACCEPT "channel unacceptable" VAL 0x0008 NWCC_BARRED "operator determined barring" VAL 0x0010 NWCC_CALL_CLEAR "normal call clearing" VAL 0x0011 NWCC_USER_BUSY "user busy" VAL 0x0012 NWCC_NO_RESPONSE "no user responding" VAL 0x0013 NWCC_ALERT_NO_ANSWER "user alerting, no answer" VAL 0x0015 NWCC_CALL_REJECT "call rejected" VAL 0x0016 NWCC_NUM_CHANGED "number changed" VAL 0x0019 NWCC_PREEMPTION "pre-emption" VAL 0x001A NWCC_USER_CLEAR "non selected user clearing" VAL 0x001B NWCC_DEST_ORDER "destination out of order" VAL 0x001C NWCC_NUM_FORMAT "invalid number format (incomplete number)" VAL 0x001D NWCC_FACILITY_REJECT "facility rejected" VAL 0x001E NWCC_STATUS_ENQUIRY "response to status enquiry" VAL 0x001F NWCC_UNSPECIFIED "normal, unspecified" VAL 0x0022 NWCC_NO_CHAN_AVAIL "no circuit / channel available" VAL 0x0026 NWCC_NETWORK_ORDER "network out of order" VAL 0x0029 NWCC_TEMP_FAIL "temporary failure" VAL 0x002A NWCC_SWITCH_CONGEST "switching equipment congestion" VAL 0x002B NWCC_INFO_DISCARD "access information discarded" VAL 0x002C NWCC_REQ_CHAN_UNAVAIL "requested circuit / channel not available" VAL 0x002F NWCC_RESOURCE_UNAVAIL "resources unavailable, unspecified" VAL 0x0031 NWCC_QOS_UNAVAIL "quality of service unavailable" VAL 0x0032 NWCC_FACILITY_UNSUBSCRIB "requested facility not subscribed" VAL 0x0037 NWCC_BARRED_IN_CUG "incoming calls barred within the CUG" VAL 0x0039 NWCC_BEARER_CAP_AUTHORIZ "bearer capability not authorized" VAL 0x003A NWCC_BEARER_CAP_UNAVAIL "bearer capability not presently available" VAL 0x003F NWCC_SERVICE_UNAVAIL "service or option not available, unspecified" VAL 0x0041 NWCC_BEARER_NOT_IMPLEM "bearer service not implemented" VAL 0x0044 NWCC_ACM_MAX "ACM equal or greater than ACMmax" VAL 0x0045 NWCC_FACILITY_NOT_IMPLEM "requested facility not implemented" VAL 0x0046 NWCC_RESTICT_BEARER_CAP "only restricted digital information bearer capability is available" VAL 0x004F NWCC_SERVICE_NOT_IMPLEM "service or option not implemented, unspecified" VAL 0x0051 NWCC_INVALID_TI "invalid transaction identifier value" VAL 0x0057 NWCC_USER_NOT_IN_CUG "user not member of CUG" VAL 0x0058 NWCC_INCOMPAT_DEST "incompatible destination" VAL 0x005B NWCC_INVALID_TRANS_NET "invalid transit network selection" VAL 0x005F NWCC_INCORRECT_MESSAGE "semantically incorrect message" VAL 0x0060 NWCC_INVALID_MAND_INFO "invalid mandatory information" VAL 0x0061 NWCC_MESSAGE_TYPE_NOT_IMPLEM "message type non-existent or not implemented" VAL 0x0062 NWCC_MESSAGE_TYPE_INCOMPAT "message type not compatible with protocol state" VAL 0x0063 NWCC_INFO_ELEM_NOT_IMPLEM "information element non-existent or not implemented" VAL 0x0064 NWCC_COND_INFO_ELEM "conditional information element error" VAL 0x0065 NWCC_MESSAGE_INCOMPAT "message not compatible with protocol state" VAL 0x0066 NWCC_TIMER "recovery on timer expiry" VAL 0x006F NWCC_PROTOCOL "protocol error, unspecified" VAL 0x007F NWCC_INTERWORKING "interworking, unspecified" VAL 0x00FF NWCC_NO_NET_CAUSE "Network initiated without cause" VALTAB VAL_dl_cause VAL 0x0000 DL_INFO_FIELD_MISMATCH "Different information fields" VAL 0x00FF DL_NO_ERROR "Equal to NOT_PRESENT_8BIT" VALTAB VAL_l2r_cause VAL 0x0001 L2R_ERR_INTERNAL "L2R internal error" VALTAB VAL_llc_cause VAL 0x0000 LLC_NORMAL_REL "Normal release" VAL 0x0001 LLC_INVALID_XID "Invalid XID response" VAL 0x0002 LLC_DM_RECEIVED "DM received" VAL 0x0003 LLC_NO_PEER_RES "No peer response" VAL 0x0004 LLC_INVALID_UA "Invalid UA response" VAL 0x0005 LLC_SABM_INVALID_XID "Invalid XID response during connection establishment" VAL 0x0006 LLC_SABM_NO_PEER_RES "No peer response during connection establishment" VAL 0x0007 LLC_XID_INVALID_XID "Invalid XID response during parameter negotiation" VAL 0x0008 LLC_XID_NO_PEER_RES "No peer response during parameter negotiation" VAL 0x0009 LLC_DISC_NO_PEER_RES "No peer response during release of connection" VAL 0x000A LLC_MULT_ASS_TLLI "Possible multiple assignment of a TLLI value" VAL 0x000B LLC_DM1_RECEIVED "Unsolicited DM response with F bit 1 in state ABM" VAL 0x000C LLC_DM1_RECEIVED_REEST "Unsolicited DM response with F bit 1 in state Timer Recovery; re-establishment procedure initiated" VAL 0x000D LLC_ACK_NO_PEER_RES_REEST "No peer response during waiting for acknowledgement; re-establishment procedure initiated" VAL 0x000E LLC_PEER_BUSY_REEST "Peer receiver busy condition; re-establishment procedure initiated" VAL 0x000F LLC_FRMR_COND "Frame rejection condition; frame discarded" VAL 0x0010 LLC_FRMR_COND_REEST "Frame rejection condition; re-establishment procedure initiated" VAL 0x0011 LLC_FRMR_RECEIVED "FRMR response received; frame discarded" VAL 0x0012 LLC_L3_REEST "Layer 3 initiated re-establishment procedure" VAL 0x0013 LLC_PEER_REEST "Peer initiated re-establishment procedure" VAL 0x0014 LLC_DM0_RECEIVED_REEST "Unsolicited DM response with F bit 0; re-establishment procedure initiated" VALTAB VAL_mm_cause VAL 0x0000 MM_SUCCESS "No error, successful operation (MM)" VAL 0x0080 MM_NO_REGISTRATION "MS is not registered" VAL 0x0081 MM_TIMER_RECOVERY "Time-out in MM during establishment" VAL 0x0082 MM_NO_REESTABLISH "Cell does not support call reestablish" VAL 0x0083 MM_INT_PREEM "Preemptive release, e.g. MO/MT clash in MM" VAL 0x0084 MM_PLMN_NOT_IDLE_MODE "Reject (not in idle mode)" VAL 0x0088 MM_AUTHENTICATION_REJECTED "Authentication failure" VAL 0x0089 MM_SIM_REMOVED "SIM card removed" VAL 0x008A MM_POWER_OFF "UE Power Off" VAL 0x008B MM_NO_SERVICE "No service" VAL 0x008C MM_LIMITED_SERVICE "Only limited service available" VAL 0x0090 MM_PROTOCOL_ERROR "Protocol error, unspecified" VAL 0x0091 MM_DEDICATED_MODE "PS service suspended while in dedicated mode" VAL 0x0092 MM_TRY_TO_UPDATE "MM is attempting to update registration" VAL 0x0093 MM_SOFT_OFF "Disabled RF RX/TX mode" VAL 0x00A0 MM_DETACH_WITH_REATTACH "Detach with reattach required" VAL 0x00FF MM_NO_ERROR "NO ERROR CAUSE" VALTAB VAL_nwmm_cause VAL 2 NWMM_IMSI_UNKNOWN_IN_HLR "IMSI unknown in HLR" VAL 3 NWMM_ILLEGAL_MS "Illegal MS" VAL 4 NWMM_IMSI_UNKNOWN_IN_VLR "IMSI unknown in VLR" VAL 5 NWMM_IMEI_NOT_ACCEPTED "IMEI not accepted" VAL 6 NWMM_ILLEGAL_ME "Illegal ME" VAL 7 NWMM_GPRS_NOT_ALLOWED "GPRS services not allowed" VAL 8 NWMM_GSM_GPRS_NOT_ALLOWED "GPRS services and non-GPRS services not allowed" VAL 9 NWMM_NO_MS_ID "MS identity cannot be derived by the network" VAL 10 NWMM_IMPLICIT_DETACHED "Implicitly detached" VAL 11 NWMM_PLMN_NOT_ALLOWED "PLMN not allowed" VAL 12 NWMM_LA_NOT_ALLOWED "Location Area not allowed" VAL 13 NWMM_ROAMING_NOT_ALLOWED "Roaming not allowed in this location area" VAL 14 NWMM_GPRS_NOT_ALLOWED_IN_PLMN "GPRS service not allowed in this PLMN" VAL 15 NWMM_NO_SUITABLE_CELL_IN_LA "Find another allowed location area in the same PLMN" VAL 16 NWMM_MSC_TEMP_NOT_REACHABLE "MSC temporarily not reachable" VAL 17 NWMM_NETWORK_FAILURE "Network failure" VAL 20 NWMM_MAC_FAILURE "MAC failure" VAL 21 NWMM_SYNCH_FAILURE "Synch failure" VAL 22 NWMM_CONGESTION "Congestion" VAL 23 NWMM_GSM_AUTH_UNACCEPTABLE "No AUTN IE present when MS supports the UMTS authentication algorithm" VAL 32 NWMM_SERVICE_NOT_SUPPORTED "MS requests a service/facility which is not sup-ported by the PLMN." VAL 33 NWMM_SERVICE_NOT_SUBSCRIBED "Requested service option not subscribed" VAL 34 NWMM_SERVICE_OUT_OF_ORDER "Service option temporary out of order in the MSC" VAL 38 NWMM_CALL_NOT_IDENTIFIED "Call is not identified" VAL 40 NWMM_NO_PDP_CONTEXT_ACTIVATED "No PDP context activated" VAL 95 NWMM_SEMANTIC_INCORRECT_MSG "Semantically incorrect message" VAL 96 NWMM_INVALID_M_INFO "Invalid mandatory information" VAL 97 NWMM_MSG_TYPE_NOT_IMPLEMENTED "Message type non-existent or not implemented" VAL 98 NWMM_MSG_TYPE_INCOMPATIBLE_WITH_STATE "Message type not compatible with the protocol state" VAL 99 NWMM_IE_NOT_IMPLEMENTED "Information element non-existent or not implemented" VAL 100 NWMM_CONDITIONAL_IE_ERROR "Conditional IE error" VAL 101 NWMM_MSG_INCOMPATIBLE_WITH_STATE "Message not compatible with the protocol state" VAL 111 NWMM_PROTOCOL_ERROR_UNSPECIFIED "Unspecified protocol error" VALTAB VAL_ppp_cause VAL 0x0001 PPP_TERM_OK_MMI "successful terminated (MMI initiated)" VAL 0x0002 PPP_TERM_OK_PEER "successful terminated (PPP peer initiated)" VAL 0x0003 PPP_TERM_NO_RESPONSE "no response from the PPP peer" VAL 0x0004 PPP_TERM_LOOP_BACK "looped-back link detected" VAL 0x0005 PPP_TERM_LCP_NOT_CONVERGE "LCP configuration is not converging" VAL 0x0006 PPP_TERM_IPCP_NOT_CONVERGE "IPCP configuration is not converging" VAL 0x0007 PPP_TERM_IPCP_NOT_STARTED "PPP peer did not start IPCP configuration" VAL 0x0008 PPP_TERM_NO_CHANNEL "can not open communication channels" VAL 0x0009 PPP_TERM_PROT_REJ_UNEXPECTED "unexpected Protocol Rejection from PPP peer" VAL 0x000A PPP_TERM_USE_AUTHED_FAILED "user authentication failed" VAL 0x000B PPP_TERM_PROT_ERROR_UNSPEC "unspecified protocol error" VALTAB VAL_rcm_cause VAL 0x0000 RCM_OK "Operation or configuration completed successfully." VAL 0x0010 RCM_ABORT_NW_NOT_FOUND "Indicates that the selected network was not found." VAL 0x0011 RCM_ABORT_NO_NW_FOUND "Indicates that no network was found." VAL 0x0012 RCM_ABORT_NO_NW_SEARCHING "Indicates that RCM has no candidates for cell reselection and cell reselection measurements are started on all neighbour cells." VAL 0x0020 RCM_ERROR_NO_CELL_SELECTED "RCM has failed to reactivate as requested and is no longer camped on a cell." VAL 0x0021 RCM_ERROR_PREVIOUS_CELL_SELECTED "RCM failed to reactivate as requested but the previously selected cell remains valid." VAL 0x0030 RCM_MEAS_SETUP_INCOMPLETE_CONFIG "A received measurement configuration is incomplete." VAL 0x0031 RCM_MEAS_SETUP_INVALID_CONFIG "A received measurement configuration is invalid." VAL 0x0032 RCM_MEAS_SETUP_UNSUPPORTED_MEAS "A received measurement type is not supported." VAL 0x1000 RCM_IRAT_CR_TARGET_BARRED "Inter RAT cell reselection target cell is barred." VAL 0x1001 RCM_IRAT_CR_TARGET_RESERVED "Inter RAT cell reselection target cell is reserved for operator use, and UE does not fulfil access requirements." VAL 0x1002 RCM_IRAT_CR_TARGET_NOT_FOUND "Inter RAT cell reselection target cell was not found." VAL 0x1003 RCM_IRAT_CR_FAILURE_UNSPECIFIED "Inter RAT cell reselection failed without specification of failure cause." VALTAB VAL_rr_cause VAL 0x0000 RR_OK "Operation or configuration completed successfully." VAL 0x0020 RR_NW_SCAN_REJECTED_CONNECTION_STATE "A network scan could not be carried out due to the current connection state of RR." VAL 0x0030 RR_SYNC_RESOURCE_ASSIGNED "Traffic channel resource assigned" VAL 0x0031 RR_SYNC_CHANNEL_MODE_MODIFIED "Channel mode modified" VAL 0x0032 RR_SYNC_DRX_CYCLE_LENGTH_UPDATED "The DRX cycle length has been modified" VAL 0x0040 RR_RADIO_LINK_FAILURE "Radio link failure occurred" VAL 0x0041 RR_DATA_LINK_FAILURE "Data link failure occurred" VAL 0x0042 RR_RANDOM_ACCESS_FAILURE "Random access failed" VAL 0x0043 RR_DL_ESTABLISHMENT_FAILURE "DL establishment failure" VAL 0x0044 RR_ESTABLISH_REJECT "Rejecting establishment due to wrong state in RR" VAL 0x0050 RR_RELEASE_ABNORMAL_UNSPECIFIED "Abnormal release, unspecified" VAL 0x0051 RR_RELEASE_INTERNAL_UNSPECIFIED "Internal release, unspecified" VAL 0x0060 RR_ACCESS_BARRED "Access barred because of access class control" VAL 0x0061 RR_T3122_RUNNING "T3122 running, emergency calls only until expiry" VAL 0x0062 RR_ACCESS_DELAYED "Access delayed because of immediate assignment reject and followed by timeout" VAL 0x1000 RR_IRAT_CR_FAILURE_UNSPECIFIED "Indicates that reselection to the specified target cell was not successful." VAL 0x1010 RR_IRAT_HO_MESSAGE_FAILURE "Indicates that a check of a handover message to GSM failed." VAL 0x1020 RR_IRAT_HO_FAILURE_UNSPECIFIED "Inter RAT handover failed without specification of failure cause." VAL 0x1021 RR_IRAT_HO_ARFCN_NOT_SUPPORTED "Inter RAT handover failed because the frequency of the target cell was not supported." VAL 0x1030 RR_IRAT_CC_FAILURE_UNSPECIFIED "Inter RAT cell change from UMTS to GSM failed without a specific cause." VALTAB VAL_nwrr_cause VAL 0x0000 NWRR_RELEASE_NORMAL_EVENT "RR connection released normally" VAL 0x0001 NWRR_RELEASE_UNSPECIFIED "RR connection released for unspecified reason" VAL 0x0002 NWRR_RELEASE_CH_UNACCEPTABLE "RR connection released due to unacceptable channel" VAL 0x0003 NWRR_RELEASE_TIMER_EXPIRED "RR connection released due to timer expirery" VAL 0x0004 NWRR_RELEASE_NO_RADIO_ACTIVITY "RR connection released due to no activity on the radio path" VAL 0x0005 NWRR_RELEASE_PREEMPTIVE "RR connection released pre-emptively" VAL 0x0006 NWRR_UTRAN_CONF_UNKNOWN "UTRAN configuration unknown" VAL 0x0008 NWRR_HANDOVER_IMPOSSIBLE "Handover impossible, timing advance out of range" VAL 0x0009 NWRR_CH_MODE_UNACCEPTABLE "Channel mode unacceptable" VAL 0x000A NWRR_FREQ_NOT_IMPLEMENTED "Frequency not implemented" VAL 0x000C NWRR_LOWER_LAYER_FAILURE "Lower layer failure" VAL 0x0041 NWRR_CALL_ALREADY_CLEARED "Call already cleared" VAL 0x005F NWRR_INCORRECT_MESSAGE "Semantically incorrect message" VAL 0x0060 NWRR_INVALID_MANDATORY_INFO "Invalid mandatory information" VAL 0x0061 NWRR_MESS_NOT_IMPLEMENTED "Message type non-existent or not implemented" VAL 0x0062 NWRR_MESS_NOT_COMPATIBLE "Message type not compatible with protocol state" VAL 0x0064 NWRR_CONDITIONAL_IE_ERROR "Conditional IE error" VAL 0x0065 NWRR_NO_CELL_ALLOCATION "No cell allocation available" VAL 0x006F NWRR_PROTOCOL_ERROR_UNSPECIFIED "Protocol error unspecified" VALTAB VAL_rlp_cause VAL 0x0000 ERR_BASE "RLP base error number" VAL 0x0000 ERR_PF_RETRANS "Max Retransmissions of Poll reached" VAL 0x0001 ERR_XID_RETRANS "Max Retransmissions of XID reached" VAL 0x0002 ERR_SABM_RETRANS "Max Retransmissions of SABM reached" VAL 0x0003 ERR_DISC_RETRANS "Max Retransmissions of DISC reached" VAL 0x0004 ERR_REMAP_RETRANS "Max Retransmissions of REMAP reached" VAL 0x0010 ERR_SDU_TO_SMALL "Received SDU is to small" VAL 0x0020 ERR_INTERNAL "Internal error" VALTAB VAL_rrc_cause VAL 0x0000 RRC_OK "Operation or configuration completed successfully." VAL 0x0001 RRC_ABORT_UNSPECIFIED "Abort for unspecified reason" VAL 0x0010 RRC_PHY_CAPABILITY_CHECK_FAILURE "Indicates that a check of PHY capabilities against requirements for a requested cell selection has failed causing RRC to refuse to start cell selection." VAL 0x0020 RRC_NW_SCAN_REJECTED_CONNECTION_STATE "A network scan could not be carried out due to the current connection state of RRC." VAL 0x0030 RRC_SYNC_RESOURCE_ASSIGNED "Traffic channel resource assigned" VAL 0x0031 RRC_SYNC_CHANNEL_MODE_MODIFIED "Channel mode modified" VAL 0x0032 RRC_SYNC_DRX_CYCLE_LENGTH_UPDATED "The DRX cycle length has been modified" VAL 0x0040 RRC_START_UPDATE_IDLE_MODE_ENTERED "Update of START values on entering idle mode" VAL 0x0041 RRC_START_UPDATE_THRESHOLD_REACHED "Update of START values because threshold has been reached." VAL 0x0042 RRC_START_UPDATE_CONNECTION_ESTABLISHED "Update of START values on connection establishment." VAL 0x1000 RRC_IRAT_HO_MESSAGE_FAILURE "Indicates that a check of a handover message to UTRAN failed." VAL 0x1020 RRC_IRAT_HO_FAILURE_UNSPECIFIED "Inter RAT handover failed without specification of failure cause." VAL 0x1030 RRC_IRAT_CC_FAILURE_UNSPECIFIED "Inter RAT cell change from GSM to UMTS failed without a specific cause." VALTAB VAL_nwrrc_cause VAL 0x0000 NWRRC_PAGING_MT_CONVERSATION "Mobile terminated conversational call" VAL 0x0001 NWRRC_PAGING_MT_STREAM "Mobile terminated streaming call" VAL 0x0002 NWRRC_PAGING_MT_INTERACTIVE "Mobile terminated interactive call" VAL 0x0003 NWRRC_PAGING_MT_BACKGROUND "Mobile terminated background call" VAL 0x0004 NWRRC_PAGING_MT_HIGH_PRIO_SIGNAL "Mobile terminated high priority signalling" VAL 0x0005 NWRRC_PAGING_MT_LOW_PRIO_SIGNAL "Mobile terminated low priority signalling" VAL 0x0006 NWRRC_PAGING_MT_UNKNOWN "Mobile terminated call - unknown cause" VAL 0x0010 NWRRC_RELEASE_NORMAL_EVENT "RRC connection released normally" VAL 0x0011 NWRRC_RELEASE_UNSPECIFIED "RRC connection released for unspecified reason" VAL 0x0012 NWRRC_RELEASE_PREEMPTIVE "RRC connection released pre-emptively" VAL 0x0013 NWRRC_RELEASE_CONGESTION "RRC connection released due to congestion" VAL 0x0014 NWRRC_RELEASE_REESTABLISH_REJECT "RRC connection released due to rejection of connection reestablishment" VAL 0x0015 NWRRC_RELEASE_DIR_SIGNAL_REESTAB "RRC connection released due to directed signalling reestablishment" VAL 0x0016 NWRRC_RELEASE_USER_INACTIVITY "RRC connection released due to user inactivity" VALTAB VAL_sim_cause VAL 0x00FF SIM_NO_ERROR "No error (Status Code 9000, 91XX, 9FXX, 920X; USIM 63CX)" VAL 0x0001 SIM_NO_SELECT "No EF selected (SC 9400; USIM 6986)" VAL 0x0002 SIM_UNKN_FILE_ID "file id not found (SC 9404; USIM 6A82)" VAL 0x0003 SIM_EF_INVALID "EF invalidated (SC 9810; USIM 6283, 6984)" VAL 0x0004 SIM_ADDR_WRONG "Address of data invalid (SC 9402; USIM 6A83)" VAL 0x0005 SIM_CMD_INCONSIST "Command inconsistent with file type (SC 9408; USIM 6981)" VAL 0x0006 SIM_MAX_INCREASE "Increase: maximum reached (SC 9850)" VAL 0x0007 SIM_CLA_WRONG "Wrong class parameter (SC 6EXX)" VAL 0x0008 SIM_INS_WRONG "Unknown instruction code (SC 6DXX; USIM 6A81)" VAL 0x0009 SIM_P1P2_WRONG "Incorrect parameter P1, P2 (SC 6BXX; USIM 6A86. 6A88)" VAL 0x000A SIM_P3_WRONG "Incorrect parameter P3 (SC 67XX; USIM 6282, 6A87)" VAL 0x000B SIM_CHV_NOTSET "No CHV active (SC 9802; USIM 6982)" VAL 0x000C SIM_CHV_VALIDATED "CHV already validated (SC 9808; USIM 6982)" VAL 0x000D SIM_ACCESS_PROHIBIT "Access conditions not fulfilled (SC 9804; USIM 6985)" VAL 0x000E SIM_OTHER_ERROR "Any other SIM error" VAL 0x000F SIM_PUK1_BLOCKED "PUK1 blocked (SC 9840; USIM 63C0)" VAL 0x0010 SIM_PUK1_REMAIN1 "Wrong PUK1, 1 attempt left (SC 9804; USIM 63C1)" VAL 0x0011 SIM_PUK1_REMAIN2 "Wrong PUK1, 2 attempts left (USIM 63C2)" VAL 0x0012 SIM_PUK1_REMAIN3 "Wrong PUK1, 3 attempts left (USIM 63C3)" VAL 0x0013 SIM_PUK1_REMAIN4 "Wrong PUK1, 4 attempts left (USIM 63C4)" VAL 0x0014 SIM_PUK1_REMAIN5 "Wrong PUK1, 5 attempts left (USIM 63C5)" VAL 0x0015 SIM_PUK1_REMAIN6 "Wrong PUK1, 6 attempts left (USIM 63C6)" VAL 0x0016 SIM_PUK1_REMAIN7 "Wrong PUK1, 7 attempts left (USIM 63C7)" VAL 0x0017 SIM_PUK1_REMAIN8 "Wrong PUK1, 8 attempts left (USIM 63C8)" VAL 0x0018 SIM_PUK1_REMAIN9 "Wrong PUK1, 9 attempts left (USIM 63C9)" VAL 0x0019 SIM_PUK1_EXPECT "PUK1 required (SC 9804, 9808; USIM 6982, 6985)" VAL 0x001A SIM_PIN1_BLOCKED "PIN1 blocked (SC 9840; USIM 63C0, 6983)" VAL 0x001B SIM_PIN1_REMAIN1 "Wrong PIN1, 1 attempt left (USIM 63C1)" VAL 0x001C SIM_PIN1_REMAIN2 "Wrong PIN1, 2 attempts left (USIM 63C2)" VAL 0x001D SIM_PIN1_EXPECT "PIN1 required (SC 9804, 9808; USIM 6982, 6985)" VAL 0x001E SIM_PUK2_BLOCKED "PUK2 blocked (SC 9840; USIM 63C0)" VAL 0x001F SIM_PUK2_REMAIN1 "Wrong PUK2, 1 attempt left (USIM 63C1)" VAL 0x0020 SIM_PUK2_REMAIN2 "Wrong PUK2, 2 attempts left (USIM 63C2)" VAL 0x0021 SIM_PUK2_REMAIN3 "Wrong PUK2, 3 attempts left (USIM 63C3)" VAL 0x0022 SIM_PUK2_REMAIN4 "Wrong PUK2, 4 attempts left (USIM 63C4)" VAL 0x0023 SIM_PUK2_REMAIN5 "Wrong PUK2, 5 attempts left (USIM 63C5)" VAL 0x0024 SIM_PUK2_REMAIN6 "Wrong PUK2, 6 attempts left (USIM 63C6)" VAL 0x0025 SIM_PUK2_REMAIN7 "Wrong PUK2, 7 attempts left (USIM 63C7)" VAL 0x0026 SIM_PUK2_REMAIN8 "Wrong PUK2, 8 attempts left (USIM 63C8)" VAL 0x0027 SIM_PUK2_REMAIN9 "Wrong PUK2, 9 attempts left (USIM 63C9)" VAL 0x0028 SIM_PUK2_EXPECT "PUK2 required (SC 9804, 9808; USIM 6982, 6985)" VAL 0x0029 SIM_PIN2_BLOCKED "PIN2 blocked (SC 9840; USIM 63C0, 6983)" VAL 0x002A SIM_PIN2_REMAIN1 "Wrong PIN2, 1 attempt left (USIM 63C1)" VAL 0x002B SIM_PIN2_REMAIN2 "Wrong PIN2, 2 attempts left (USIM 63C2)" VAL 0x002C SIM_PIN2_EXPECT "PIN1 required (SC 9804, 9808; USIM 6982, 6985)" VAL 0x002D SIM_SAT_BUSY "SIM Application Toolkit busy (SC 9300)" VAL 0x002E SIM_DNL_ERROR "SAT download error (SC 9EXX; USIM 62XX, 63XX)" VAL 0x002F SIM_CARD_REMOVED "SIM card removed or exchanged" VAL 0x0030 SIM_PARAM_WRONG "Wrong parameter in primitive" VAL 0x0031 SIM_DRV_NOCARD "SIM driver error: no card detected" VAL 0x0032 SIM_DRV_NOINT "SIM driver error: no interrupt" VAL 0x0033 SIM_DRV_NOATR "SIM driver error: no answer to reset" VAL 0x0034 SIM_DRV_READ "SIM driver error: invalid response" VAL 0x0035 SIM_DRV_XMIT "SIM driver error: unsuccessful transmission" VAL 0x0036 SIM_DRV_OVF "SIM driver error: interrupt overflow" VAL 0x0037 SIM_DRV_LEN "SIM driver error: incorrect size of response" VAL 0x0038 SIM_DRV_CARDREJ "SIM driver error: card rejected (invalid properties)" VAL 0x0039 SIM_DRV_WAIT "SIM driver error: timeout" VAL 0x003A SIM_DRV_ABNCASE1 "SIM driver error: abnormal case 1" VAL 0x003B SIM_DRV_ABNCASE2 "SIM driver error: abnormal case 2" VAL 0x003C SIM_DRV_RCVOVFL "SIM driver error: more than 256 bytes received" VAL 0x003F SIM_DRV_TEMPFAIL "SIM driver error: temprary failure, SIM reset required" VAL 0x0040 SIM_UMTS_AUTH_SQN_ERROR "UMTS authentication failed due to Sequence Number error (erroneous AUTN)" VAL 0x0041 SIM_UMTS_AUTH_MAC_ERROR "UMTS authentication failed due to MAC error (erroneous AUTN)" VALTAB VAL_sm_cause VAL 0x0001 SM_MODIFY_COLLISION "Collision between MO and MT modify. MT wins." VAL 0x0002 SM_INVALID_NSAPI "Attempted procedure on non-existing context/NSAPI" VAL 0x0003 SM_R99_PROCEDURE_REJECTED_IN_R97 "R99 Procedure rejected: Currently active in R97 network" VAL 0x0004 SM_PRE_R99_NETWORK_ENTERED "Context deactivation due to entering pre-R99 network" VAL 0x0005 SM_ACTIVATION_OVERRIDE "Context deactivation due to activation override" VALTAB VAL_nwsm_cause VAL 0x0019 NWSM_LLC_OR_SNDCP_FAILURE "LLC or SNDCP failure" VAL 0x001A NWSM_INSUFFICIENT_RESOURCES "Insufficient resources" VAL 0x001B NWSM_MISSING_OR_UNKNOWN_APN "Missing or unknown APN" VAL 0x001C NWSM_UNKNOWN_PDP_ADDR_OR_TYPE "Unknown PDP address or PDP type" VAL 0x001D NWSM_USER_AUTH_FAILED "User Aauthentication failed" VAL 0x001E NWSM_ACTIVATE_REJECTED_BY_GGSN "Activation rejected by GGSN" VAL 0x001F NWSM_ACTIVATE_REJECTED_UNSPECIFIED "Activation rejected, unspecified" VAL 0x0020 NWSM_SERVICE_NOT_SUPPORTED "Service option not supported" VAL 0x0021 NWSM_SERVICE_NOT_SUBSCRIBED "Requested service option not subscribed" VAL 0x0022 NWSM_SERVICE_TEMP_OUT_OF_ORDER "Service option temporarily out of order" VAL 0x0023 NWSM_NSAPI_IN_USE "NSAPI already used (pre-R99 only)" VAL 0x0024 NWSM_REGULAR_DEACTIVATION "Regular deactivation" VAL 0x0025 NWSM_QOS_NOT_ACCEPTED "QoS not accepted" VAL 0x0026 NWSM_NETWORK_FAILURE "Network failure" VAL 0x0027 NWSM_REACTIVATION_REQUESTED "Reactivation requested" VAL 0x0028 NWSM_FEATURE_NOT_SUPPORTED "Feature not supported (context activation)" VAL 0x0029 NWSM_SEMANTIC_TFT_ERROR "Semantic error in TFT operation" VAL 0x002A NWSM_SYNTACTIC_TFT_ERROR "Syntactical error in TFT operation" VAL 0x002B NWSM_UNKNOWN_LINKED_TI "Unknown PDP context (identified by linked TI)" VAL 0x002C NWSM_SEMANTIC_TFT_FILTER_ERROR "Semantic error in packet filter" VAL 0x002D NWSM_SYNTACTIC_TFT_FILTER_ERROR "Syntactical error in packet filter" VAL 0x002E NWSM_CONTEXT_NEEDS_TFT "PDP context without TFT already activated" VAL 0x0051 NWSM_INVALID_TI "Invalid transaction identifier value" VAL 0x005F NWSM_SEMANTIC_ERROR_IN_MSG "Semantically incorrect message" VAL 0x0060 NWSM_INVALID_MANDATORY_ELEMENT "Invalid mandatory information" VAL 0x0061 NWSM_MSG_TYPE_NOT_IMPLEMENTED "Message type non-existent or not implemented" VAL 0x0062 NWSM_MSG_TYPE_INCOMPATIBLE_WITH_STATE "Message type not compatible with the protocol state" VAL 0x0063 NWSM_IE_NOT_IMPLEMENTED "Information element non-existent or not implemented" VAL 0x0064 NWSM_CONDITIONAL_IE_ERROR "Conditional IE error" VAL 0x0065 NWSM_MSG_INCOMPATIBLE_WITH_STATE "Message not compatible with the protocol state" VAL 0x006F NWSM_PROTOCOL_ERROR_UNSPECIFIED "Unspecified protocol error" VALTAB VAL_sms_cause VAL 0b1000100111111111 SMS_NO_ERROR "No error" VAL 0b1100100100000000 SMS_PARAM_WRONG "Wrong parameter in primitive" VAL 0b1100100100000001 SMS_ENTITY_BUSY "Entity is busy" VAL 0b1100100100000010 SMS_OPER_NOT_ALLW "Operation not allowed" VAL 0b1100100100000011 SMS_OPER_NOT_SUPP "Operation not supported" VAL 0b1100100100000100 SMS_SIM_BUSY "SIM busy" VAL 0b1100100100000101 SMS_MEM_FAIL "Memory failure" VAL 0b1100100100000110 SMS_INV_INDEX "Invalid memory index" VAL 0b1100100100001000 SMS_MEM_FULL "Memory full" VAL 0b1100100100001001 SMS_NO_SERVICE "No network service" VAL 0b1100100100001010 SMS_NET_TIMEOUT "Network timeout" VAL 0b1100100100001011 SMS_UNEXP_CNMA "No +CNMA acknowledgement expected" VAL 0b1100100100001111 SMS_OTHER_ERROR "Any other error" VALTAB VAL_nwsms_cp_cause VAL 0x0011 NWSMS_CP_NETWORK_FAILURE "Network Failure" VAL 0x0016 NWSMS_CP_CONGESTION "Congestion" VAL 0x0051 NWSMS_CP_INVALID_TI "Invalid Transaction Identifier" VAL 0x005F NWSMS_CP_SEM_INC_MSG "Semantically incorrect message" VAL 0x0060 NWSMS_CP_INV_MAND_INFO "Invalid mandatory information" VAL 0x0061 NWSMS_CP_MSG_TYPE_NON_EXIST "Message type non-existent or not implemented" VAL 0x0062 NWSMS_CP_MSG_NOT_COMP "Message not compatible with the short message protocol state" VAL 0x0063 NWSMS_CP_INFO_NON_EXIST "Information element non-existent or not implemented" VAL 0x006F NWSMS_CP_PROTOCOL_ERROR "Protocol error, unspecified" VALTAB VAL_nwsms_rp_cause VAL 0x0001 NWSMS_RP_UNASSIGNED_NUMBER "Unassigned (unallocated) number" VAL 0x0008 NWSMS_RP_OPERATOR_DET_BARRED "Operator determined barring" VAL 0x000A NWSMS_RP_CALL_BARRED "Call barred" VAL 0x0015 NWSMS_RP_SM_TRANSFER_REJECTED "Short message transfer rejected" VAL 0x0016 NWSMS_RP_MEM_CAP_EXCEEDED "Memory Capacity exceeded" VAL 0x001B NWSMS_RP_DEST_OUT_OF_ORDER "Destination out of order" VAL 0x001C NWSMS_RP_UNIDENT_SUBSCRIBER "Unidentified subscriber" VAL 0x001D NWSMS_RP_FACILITY_REJECTED "Facility rejected" VAL 0x001E NWSMS_RP_UNKNOWN_SUBSCRIBER "Unknown subscriber" VAL 0x0026 NWSMS_RP_NET_OUT_OF_ORDER "Network out of order" VAL 0x0029 NWSMS_RP_TEMP_FAILURE "Temporary Failure" VAL 0x002A NWSMS_RP_CONGESTION "Congestion" VAL 0x002F NWSMS_RP_NO_RESOURCES "Resources unavailable, unspecified" VAL 0x0032 NWSMS_RP_FAC_NOT_SUBSCRIBED "Requested facility not subscribed" VAL 0x0045 NWSMS_RP_FAC_NOT_IMPL "Requested facility not implemented" VAL 0x0051 NWSMS_RP_INV_SM_TR_REF_VAL "Invalid short message transfer reference value" VAL 0x005F NWSMS_RP_SEM_INC_MSG "Semantically incorrect message" VAL 0x0060 NWSMS_RP_INV_MAND_INFO "Invalid mandatory information" VAL 0x0061 NWSMS_RP_MSG_NON_EXIST "Message type non-existent or not implemented" VAL 0x0062 NWSMS_RP_MSG_NOT_COMP "Message not compatible with the short message protocol state" VAL 0x0063 NWSMS_RP_INFO_NON_EXIST "Information element non-existent or not implemented" VAL 0x006F NWSMS_RP_PROTOCOL_ERROR "Protocol error, unspecified" VAL 0x007F NWSMS_RP_INTERWORKING "Interworking, unspecified" VALTAB VAL_nwsms_tp_cause VAL 0x80 NWSMS_TP_TM_IW_NOT_SUP "Telematic interworking not supported (MO)" VAL 0x81 NWSMS_TP_SM_0_NOT_SUP "Short Message Type 0 not supported (MO, MT)" VAL 0x82 NWSMS_TP_CANT_REP_SM "Cannot replace short message (MO, MT)" VAL 0x8F NWSMS_TP_TP_PID_UNSPEC "Unspecified TP-PID error (MO, MT)" VAL 0x90 NWSMS_TP_DCS_NOT_SUP "Data coding scheme (alphabet) not supported (MO)" VAL 0x91 NWSMS_TP_CLASS_NOT_SUP "Message class not supported (MT)" VAL 0x9F NWSMS_TP_TP_DCS_UNSPEC "Unspecified TP-DCS error (MO, MT)" VAL 0xA0 NWSMS_TP_CMD_CANT_ACT "Command cannot be actioned (MO)" VAL 0xA1 NWSMS_TP_CMD_NOT_SUP "Command unsupported (MO)" VAL 0xAF NWSMS_TP_TP_CMD_UNSPEC "Unspecified TP-Command error (MO)" VAL 0xB0 NWSMS_TP_TPDU_NOT_SUP "TPDU not supported (MO, MT)" VAL 0xC0 NWSMS_TP_SC_BUSY "SC busy (MO)" VAL 0xC1 NWSMS_TP_NO_SC_SUBSCRIPT "No SC subscription (MO)" VAL 0xC2 NWSMS_TP_SC_SYS_FAIL "SC system failure (MO)" VAL 0xC3 NWSMS_TP_INV_SME_ADDR "Invalid SME address (MO)" VAL 0xC4 NWSMS_TP_DEST_SME_BARRED "Destination SME barred (MO)" VAL 0xC5 NWSMS_TP_REJ_DUPL_SM "SM rejected-duplicate SM (MO)" VAL 0xC6 NWSMS_TP_TPVPF_NOT_SUP "Validity Period Format not supported (MO)" VAL 0xC7 NWSMS_TP_TPVP_NOT_SUP "Validity Period not supported (MO)" VAL 0xD0 NWSMS_TP_SIM_MEM_FULL "SIM SMS storage full (MT)" VAL 0xD1 NWSMS_TP_NO_SMS_MEM_IN_MS "No SMS storage capability in SIM (MT)" VAL 0xD2 NWSMS_TP_ERROR_IN_MS "Error in MS (MT)" VAL 0xD3 NWSMS_TP_MEM_CAP_EXCEED "Memory Capacity exceeded (MO, MT)" VAL 0xD4 NWSMS_TP_SAT_BUSY "SIM Application Toolkit busy (MT)" VAL 0xD5 NWSMS_TP_SAT_DNL_ERROR "SIM Data Download error (MT)" VAL 0xFF NWSMS_TP_UNSPECIFIED "Unspecified error cause (MO, MT)" VALTAB VAL_sn_cause VAL 0x0000 SN_NORMAL_RELEASE "normal release (Not specified in 3G)" VAL 0x0100 SN_INVALID_XID "invalid XID response" VAL 0x0101 SN_DM_RECEIVED "DM received" VAL 0x0102 SN_NO_PEER_RESPONSE "no peer response" VAL 0x0103 SN_LOWLAYER_DEACT "lower layer deactivation" VALTAB VAL_upm_cause VAL 0x0000 UPM_NORMAL_RELEASE "normal release" VAL 0x0010 UPM_DTI_DISCONNECT "The DTI was closed for some reason" VAL 0x0200 UPM_RT_QOS_RELEASE "A real-time QoS caused a (RAB) release" VAL 0x0201 UPM_REEST_NEEDED "A real-time QoS context needs (RAB) reestablishment" VAL 0x0202 UPM_REEST_REJECT "A reestablishment was rejected" VALTAB VAL_rrlc_cause VAL 0 LCS_OK "no error" VAL 1 LCS_ERROR "Unspecified error" VAL 10 LCS_WRONG_BTS "Serving Cell BTS differs from Reference BTS" VAL 20 LCS_HANDOVER "handover occured during Position Measurement procedure" VAR cc_cause "Cause element containing result of a CC operation" S VAL @p_8010_153_cause_include - VAL_cc_cause@ VAR nwcc_cause "Cause element containing result of a CC operation" S VAL @p_8010_153_cause_include - VAL_nwcc_cause@ VAR nwss_cause "Cause element containing result of a SS operation" S VAL @p_8010_153_cause_include - VAL_nwcc_cause@ VAR dl_cause "Cause element containing result of a DL operation" S VAL @p_8010_153_cause_include - VAL_dl_cause@ VAR l2r_cause "Cause element containing result of a L2R operation" S VAL @p_8010_153_cause_include - VAL_l2r_cause@ VAR llc_cause "Cause element containing result of a LLC operation" S VAL @p_8010_153_cause_include - VAL_llc_cause@ VAR mm_cause "Cause element containing result of an MM operation" S VAL @p_8010_153_cause_include - VAL_mm_cause@ VAR nwmm_cause "Cause element from network peer MM" S VAL @p_8010_153_cause_include - VAL_nwmm_cause@ VAR ppp_cause "Cause element containing result of a PPP operation" S VAL @p_8010_153_cause_include - VAL_ppp_cause@ VAR upper_nw_cause "If ctrl_value is below is_from_nw the cause originates from NW. Do NOT use as real value of ctrl_value." S VAR upper_ue_cause "If ctrl_value is between is_from_nw and is_from_ue the cause originates from UE. Do NOT use as real value of ctrl_value." S VAR rcm_cause "Cause element containing result of an RCM operation" S VAL @p_8010_153_cause_include - VAL_rcm_cause@ VAR rr_cause "Cause element containing result of an RR operation" S VAL @p_8010_153_cause_include - VAL_rr_cause@ VAR nwrr_cause "Cause element from GSM peer RR" S VAL @p_8010_153_cause_include - VAL_nwrr_cause@ VAR rlp_cause "Cause element containing result of an RLP operation" S VAL @p_8010_153_cause_include - VAL_rlp_cause@ VAR rrc_cause "Cause element containing result of an RRC operation" S VAL @p_8010_153_cause_include - VAL_rrc_cause@ VAR nwrrc_cause "Cause element from UTRAN peer RRC" S VAL @p_8010_153_cause_include - VAL_nwrrc_cause@ VAR sim_cause "Cause element from SIM to ACI/SMS/MM" S VAL @p_8010_153_cause_include - VAL_sim_cause@ VAR sm_cause "Cause element containing result of an SM operation" S VAL @p_8010_153_cause_include - VAL_sm_cause@ VAR nwsm_cause "Cause element from network peer SM" S VAL @p_8010_153_cause_include - VAL_nwsm_cause@ VAR sms_cause "Cause element containing result of an SMS operation" S VAL @p_8010_153_cause_include - VAL_sms_cause@ VAR nwsms_cp_cause "Cause element containing result of an SMS operation" S VAL @p_8010_153_cause_include - VAL_nwsms_cp_cause@ VAR nwsms_rp_cause "Cause element containing result of an SMS operation" S VAL @p_8010_153_cause_include - VAL_nwsms_rp_cause@ VAR nwsms_tp_cause "Cause element containing result of an SMS operation" S VAL @p_8010_153_cause_include - VAL_nwsms_tp_cause@ VAR sn_cause "Cause element containing result of an SNDCP operation" S VAL @p_8010_153_cause_include - VAL_sn_cause@ VAR upm_cause "Cause element containing result of an UPM operation" S VAL @p_8010_153_cause_include - VAL_upm_cause@ VAR rrlc_cause "cause" B VAL @p_8010_153_cause_include - VAL_rrlc_cause@ UNION value "Cause element containing result of operation" { is_from_nwmm nwmm_cause ; MM Network cause is_from_nwrr nwrr_cause ; RR Network cause is_from_nwrrc nwrrc_cause ; RRC Network cause is_from_nwsm nwsm_cause ; SM Network cause is_from_nwss nwss_cause ; SS Network cause is_from_nwsms_cp nwsms_cp_cause ; SMS CP Network Cause is_from_nwsms_rp nwsms_rp_cause ; SMS RP Network Cause is_from_nwsms_tp nwsms_tp_cause ; SMS TP Network Cause is_from_nw upper_nw_cause ; If ctrl_value is below is_from_nw the cause originates from NW. Do NOT use as real value of ctrl_value. is_from_cc cc_cause ; CC cause is_from_dl dl_cause ; DL cause is_from_l2r l2r_cause ; L2R cause is_from_llc llc_cause ; LLC cause is_from_mm mm_cause ; MM cause is_from_nwcc nwcc_cause ; CC Network cause is_from_ppp ppp_cause ; PPP cause is_from_rcm rcm_cause ; RCM cause is_from_rr rr_cause ; RR cause is_from_rlp rlp_cause ; RLP cause is_from_rrc rrc_cause ; RRC cause is_from_sim sim_cause ; SIM cause is_from_sm sm_cause ; SM cause is_from_sms sms_cause ; SMS cause is_from_sndcp sn_cause ; SNDCP cause is_from_upm upm_cause ; UPM cause is_from_ue upper_ue_cause ; If ctrl_value is between is_from_nw and is_from_ue the cause originates from UE. Do NOT use as real value of ctrl_value. is_from_rrlc rrlc_cause ; RRLC cause value } COMP ps_cause "Cause element containing result of operation" { value ; Cause value } ; CAUSE_EXPORT 0x0000 PRIM CAUSE_EXPORT 0x0000 { ps_cause ; Cause element containing result of operation }