FreeCalypso > hg > fc-magnetite
view cdg-hybrid/cdginc/p_l2r.val @ 636:57e67ca2e1cb
pcmdata.c: default +CGMI to "FreeCalypso" and +CGMM to model
The present change has no effect whatsoever on Falconia-made and Openmoko-made
devices on which /pcm/CGMI and /pcm/CGMM files have been programmed in FFS
with sensible ID strings by the respective factories, but what should AT+CGMI
and AT+CGMM queries return when the device is a Huawei GTM900 or Tango modem
that has been converted to FreeCalypso with a firmware change? Before the
present change they would return compiled-in defaults of "<manufacturer>" and
"<model>", respectively; with the present change the firmware will self-identify
as "FreeCalypso GTM900-FC" or "FreeCalypso Tango" on the two respective targets.
This firmware identification will become important if someone incorporates an
FC-converted GTM900 or Tango modem into a ZeroPhone-style smartphone where some
high-level software like ofono will be talking to the modem and will need to
properly identify this modem as FreeCalypso, as opposed to some other AT command
modem flavor with different quirks.
In technical terms, the compiled-in default for the AT+CGMI query (which will
always be overridden by the /pcm/CGMI file in FFS if one is present) is now
"FreeCalypso" in all configs on all targets; the compiled-in default for the
AT+CGMM query (likewise always overridden by /pcm/CGMM if present) is
"GTM900-FC" if CONFIG_TARGET_GTM900 or "Tango" if CONFIG_TARGET_TANGO or the
original default of "<model>" otherwise.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 19 Jan 2020 20:14:58 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_l2r.val | | SOURCE : "sap\l2r.pdf" | | LastModified : "2001-10-31" | | IdAndVersion : "8411.102.01.124" | | SrcFileTime : "Thu Nov 29 09:44:22 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_L2R_VAL #define P_L2R_VAL #define CDG_ENTER__P_L2R_VAL #define CDG_ENTER__FILENAME _P_L2R_VAL #define CDG_ENTER__P_L2R_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_L2R_VAL__LAST_MODIFIED _2001_10_31 #define CDG_ENTER__P_L2R_VAL__ID_AND_VERSION _8411_102_01_124 #define CDG_ENTER__P_L2R_VAL__SRC_FILE_TIME _Thu_Nov_29_09_44_22_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_L2R_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_pt */ #define L2R_COMPR_TYPE_V42BIS (0x0) /* V.42bis */ /* * Value constants for VAL_p0 */ #define L2R_COMP_DIR_NONE (0x0) /* compress in neither direction */ #define L2R_COMP_DIR_TRANSMIT (0x1) /* compress in uplink direction only */ #define L2R_COMP_DIR_RECEIVE (0x2) /* compress in downlink direction only */ #define L2R_COMP_DIR_BOTH (0x3) /* compress in both directions */ /* * Value constants for VAL_uil2p */ #define L2R_ISO6429 (0x0) /* ISO6429, codeset 0, DC1/DC3 (with flow control) */ #define L2R_COPnoFlCt (0x1) /* Character Oriented Protocol with No Flow Control */ /* * Value constants for VAL_rate */ #define L2R_HALFRATE_4800 (0x0) /* halfrate 4,8/6 kBit */ #define L2R_FULLRATE_4800 (0x1) /* fullrate 4,8/6 kBit */ #define L2R_FULLRATE_9600 (0x2) /* fullrate 9,6/12 kBit */ #define L2R_FULLRATE_14400 (0x3) /* fullrate 13,4/14,4 kBit */ /* * Value constants for VAL_ack_flg */ #define L2R_ACK (0x0) /* acknowledged */ #define L2R_NAK (0x1) /* not acknowledged */ /* * Value constants for VAL_cause */ #define CAUSE_DUMMY (0x0) /* The following causes can occur within this primitive: all those possible within the RLP_ERROR_IND primitive of the RLP SAP */ /* * Value constants for VAL_dti_conn */ #define L2R_CONNECT_DTI (0x0) /* Connect DTI to L2R */ #define L2R_DISCONNECT_DTI (0x1) /* Connect DTI to upper layer */ /* * Value constants for VAL_link_id */ #define L2R_LINK_ID_DEFAULT (0x0) /* Default link id */ /* * Value constants for VAL_dti_direction */ #define L2R_DTI_NORMAL (0x0) /* DTI used normally */ #define L2R_DTI_INVERTED (0x1) /* DTI is inverted */ /* * user defined constants */ #define L2R_K_MS_IWF_MIN (0x0) #define L2R_K_MS_IWF_MAX (0x3d) #define L2R_K_MS_IWF_DEF (0x3d) #define L2R_K_IWF_MS_MIN (0x0) #define L2R_K_IWF_MS_MAX (0x3d) #define L2R_K_IWF_MS_DEF (0x3d) #define L2R_T1_MIN_FULLRATE_14400 (0x2a) #define L2R_T1_MIN_FULLRATE_9600 (0x26) #define L2R_T1_MIN_FULLRATE_4800 (0x2c) #define L2R_T1_MIN_HALFRATE_4800 (0x3c) #define L2R_T1_MIN (0x26) #define L2R_T1_MAX (0xff) #define L2R_T1_DEF_FULLRATE_14400 (0x34) #define L2R_T1_DEF_FULLRATE_9600 (0x30) #define L2R_T1_DEF_FULLRATE_4800 (0x36) #define L2R_T1_DEF_HALFRATE_4800 (0x4e) #define L2R_T1_DEF (0x30) #define L2R_T2_MIN (0x0) #define L2R_T2_MAX (0xff) #define L2R_T2_DEF (0x14) #define L2R_N2_MIN (0x1) #define L2R_N2_MAX (0xff) #define L2R_N2_DEF (0x6) #define L2R_PT_MIN (0x0) #define L2R_PT_MAX (0x0) #define L2R_PT_DEF (0x0) #define L2R_P0_MIN (0x0) #define L2R_P0_MAX (0x0) #define L2R_P0_DEF (0x0) #define L2R_P1_MIN (0x200) #define L2R_P1_MAX (0xffff) #define L2R_P1_DEF (0x200) #define L2R_P2_MIN (0x6) #define L2R_P2_MAX (0xfa) #define L2R_P2_DEF (0x6) #define L2R_BYTES_PER_PRIM_MIN (0x19) #define L2R_BYTES_PER_PRIM_MAX (0xfa) #define L2R_BYTES_PER_PRIM_DEF (0xfa) #define L2R_BUFFER_SIZE_MIN (0x800) #define L2R_BUFFER_SIZE_MAX (0x1000) #define L2R_BUFFER_SIZE_DEF (0x800) #define L2R_ENTITY_NAME_LEN (0x6) #include "CDG_LEAVE.h" #endif