FreeCalypso > hg > fc-magnetite

view cdg211/cdginc/p_dti.val @ 636:57e67ca2e1cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
pcmdata.c: default +CGMI to "FreeCalypso" and +CGMM to model The present change has no effect whatsoever on Falconia-made and Openmoko-made devices on which /pcm/CGMI and /pcm/CGMM files have been programmed in FFS with sensible ID strings by the respective factories, but what should AT+CGMI and AT+CGMM queries return when the device is a Huawei GTM900 or Tango modem that has been converted to FreeCalypso with a firmware change? Before the present change they would return compiled-in defaults of "<manufacturer>" and "<model>", respectively; with the present change the firmware will self-identify as "FreeCalypso GTM900-FC" or "FreeCalypso Tango" on the two respective targets. This firmware identification will become important if someone incorporates an FC-converted GTM900 or Tango modem into a ZeroPhone-style smartphone where some high-level software like ofono will be talking to the modem and will need to properly identify this modem as FreeCalypso, as opposed to some other AT command modem flavor with different quirks. In technical terms, the compiled-in default for the AT+CGMI query (which will always be overridden by the /pcm/CGMI file in FFS if one is present) is now "FreeCalypso" in all configs on all targets; the compiled-in default for the AT+CGMM query (likewise always overridden by /pcm/CGMM if present) is "GTM900-FC" if CONFIG_TARGET_GTM900 or "Tango" if CONFIG_TARGET_TANGO or the original default of "<model>" otherwise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 19 Jan 2020 20:14:58 +0000
parents 56abf6cf8a0b
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_dti.val                                                      |
| SOURCE  : "__out__\g23m_dfile\prim\dti.pdf"                              |
| LastModified : "2000-06-29"                                              |
| IdAndVersion : "8411.110.00.007"                                         |
| SrcFileTime  : "Mon Nov 24 15:50:28 2003"                                |
| Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:15 2007                    |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_DTI_VAL
#define P_DTI_VAL


#define CDG_ENTER__P_DTI_VAL

#define CDG_ENTER__FILENAME _P_DTI_VAL
#define CDG_ENTER__P_DTI_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_DTI_VAL__LAST_MODIFIED _2000_06_29
#define CDG_ENTER__P_DTI_VAL__ID_AND_VERSION _8411_110_00_007

#define CDG_ENTER__P_DTI_VAL__SRC_FILE_TIME _Mon_Nov_24_15_50_28_2003

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_DTI_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_c_id
 */
#define DTI_NSAPI_0                    (0x0)      /* escape mechanism for future extensions */
#define DTI_NSAPI_1                    (0x1)      /* Point-To-Multipoint Multicast information */
#define DTI_NSAPI_2                    (0x2)      /* reserved for future use        */
#define DTI_NSAPI_3                    (0x3)      /* reserved for future use        */
#define DTI_NSAPI_4                    (0x4)      /* reserved for future use        */
#define DTI_NSAPI_5                    (0x5)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_6                    (0x6)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_7                    (0x7)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_8                    (0x8)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_9                    (0x9)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_10                   (0xa)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_11                   (0xb)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_12                   (0xc)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_13                   (0xd)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_14                   (0xe)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_15                   (0xf)      /* dynamically allocated NSAPI value */
#define DTI_C_ID_DEFAULT               (0x5)      /* Default value for c_id         */

/*
 * Value constants for VAL_p_id
 */
#define DTI_PID_IP                     (0x21)     /* simple ip packet               */
#define DTI_PID_CTCP                   (0x2d)     /* Van Jacobson compressed TCP/IP header */
#define DTI_PID_UTCP                   (0x2f)     /* Van Jacobson uncompressed TCP/IP header */
#define DTI_PID_FRAME                  (0x0)      /* PPP frame                      */

/*
 * Value constants for VAL_op_ack
 */
#define OP_ACK                         (0x1)      /* acknowledged operation mode    */
#define OP_UNACK                       (0x0)      /* unacknowledged operation mode  */

/*
 * Value constants for VAL_st_flow
 */
#define DTI_FLOW_ON                    (0x0)      /* flow control is inactive       */
#define DTI_FLOW_OFF                   (0x1)      /* flow control is active         */

/*
 * Value constants for VAL_st_line_sa
 */
#define DTI_SA_ON                      (0x0)      /* SA is inactive                 */
#define DTI_SA_OFF                     (0x1)      /* SA is active                   */

/*
 * Value constants for VAL_st_line_sb
 */
#define DTI_SB_ON                      (0x0)      /* SB is inactive                 */
#define DTI_SB_OFF                     (0x1)      /* SB is active                   */

/*
 * Value constants for VAL_st_escape
 */
#define DTI_ESC_OFF                    (0x0)      /* No escape detected             */
#define DTI_ESC_ON                     (0x1)      /* Escape detected                */

#include "CDG_LEAVE.h"


#endif