FreeCalypso > hg > fc-magnetite
view cdg211/cdginc/p_fad.val @ 636:57e67ca2e1cb
pcmdata.c: default +CGMI to "FreeCalypso" and +CGMM to model
The present change has no effect whatsoever on Falconia-made and Openmoko-made
devices on which /pcm/CGMI and /pcm/CGMM files have been programmed in FFS
with sensible ID strings by the respective factories, but what should AT+CGMI
and AT+CGMM queries return when the device is a Huawei GTM900 or Tango modem
that has been converted to FreeCalypso with a firmware change? Before the
present change they would return compiled-in defaults of "<manufacturer>" and
"<model>", respectively; with the present change the firmware will self-identify
as "FreeCalypso GTM900-FC" or "FreeCalypso Tango" on the two respective targets.
This firmware identification will become important if someone incorporates an
FC-converted GTM900 or Tango modem into a ZeroPhone-style smartphone where some
high-level software like ofono will be talking to the modem and will need to
properly identify this modem as FreeCalypso, as opposed to some other AT command
modem flavor with different quirks.
In technical terms, the compiled-in default for the AT+CGMI query (which will
always be overridden by the /pcm/CGMI file in FFS if one is present) is now
"FreeCalypso" in all configs on all targets; the compiled-in default for the
AT+CGMM query (likewise always overridden by /pcm/CGMM if present) is
"GTM900-FC" if CONFIG_TARGET_GTM900 or "Tango" if CONFIG_TARGET_TANGO or the
original default of "<model>" otherwise.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 19 Jan 2020 20:14:58 +0000 |
parents | 56abf6cf8a0b |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_fad.val | | SOURCE : "__out__\g23m_dfile\prim\fad.pdf" | | LastModified : "2002-04-22" | | IdAndVersion : "8411.103.00.305" | | SrcFileTime : "Mon Nov 24 15:50:18 2003" | | Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:15 2007 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_FAD_VAL #define P_FAD_VAL #define CDG_ENTER__P_FAD_VAL #define CDG_ENTER__FILENAME _P_FAD_VAL #define CDG_ENTER__P_FAD_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_FAD_VAL__LAST_MODIFIED _2002_04_22 #define CDG_ENTER__P_FAD_VAL__ID_AND_VERSION _8411_103_00_305 #define CDG_ENTER__P_FAD_VAL__SRC_FILE_TIME _Mon_Nov_24_15_50_18_2003 #include "CDG_ENTER.h" #undef CDG_ENTER__P_FAD_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_trans_rate */ #define R_BCS (0x12c) /* rate 300 bit/s */ #define R_2400 (0x960) /* rate 2400 bit/s */ #define R_4800 (0x12c0) /* rate 4800 bit/s */ #define R_7200 (0x1c20) /* rate 7200 bit/s */ #define R_9600 (0x2580) /* rate 9600 bit/s */ #define R_12000 (0x2ee0) /* rate 12000 bit/s */ #define R_14400 (0x3840) /* rate 14400 bit/s */ /* * Value constants for VAL_mode */ #define MUX_OFF (0x0) /* ignore */ #define MUX_BCS (0x1) /* BCS data */ #define MUX_MSG (0x2) /* MSG data */ /* * Value constants for VAL_cause */ #define ERR_REM_FAD (0xcc00) /* reserved */ #define ERR_REM_PREAMBLE (0xcc11) /* DATA received instead of PREAMBLE - Preamble too short */ #define ERR_REM_DATA_BCS (0xcc12) /* DATA received from remote modem during BCS phase */ #define ERR_REM_TRAIN_START (0xcc13) /* DATA received from remote modem at start of training */ #define ERR_REM_NO_TRAINING (0xcc14) /* DATA received from remote modem prior to training */ #define ERR_REM_TRAINING (0xcc15) /* DATA received from remote modem during training */ #define ERR_REM_MSG (0xcc16) /* DATA received from remote modem while sending MSG data */ #define ERR_REM_PREAMBLE_SHORT (0xcc17) /* PREAMBLE received from remote station too short */ #define ERR_REM_PREAMBLE_LONG (0xcc18) /* PREAMBLE received from remote station too long */ #define ERR_REM_IDENT (0xcc19) /* Incorrect identification from remote modem */ #define ERR_LOCAL_FAD (0xcc20) /* reserved */ #define ERR_LOCAL_BCS_RATE (0xcc21) /* BCS rate requested by local modem (MSG phase) */ #define ERR_LOCAL_MSG_RATE (0xcc22) /* MSG rate requested by local modem (BCS phase) */ #define ERR_LOCAL_DATA_NULL (0xcc23) /* DATA request received from T30 in NULL state */ #define ERR_LOCAL_DATA_BCS (0xcc24) /* DATA request received from T30 while receiving BCS data */ #define ERR_LOCAL_DATA_TCF_SND (0xcc25) /* DATA request received from T30 while sending TCF data */ #define ERR_LOCAL_DATA_TCF_RCV (0xcc26) /* DATA request received from T30 while receiving TCF data */ #define ERR_LOCAL_DATA_MSG (0xcc27) /* DATA request received from T30 while receiving MSG data */ #define ERR_LOCAL_DATA_UNDEF (0xcc28) /* DATA request received from T30 - state unknown */ #define ERR_LOCAL_DATA_MSG_UFL (0xcc29) /* DATA request not received from T30 - MSG-REC underflow */ #define ERR_LOCAL_IDENT (0xcc30) /* Incorrect identification from local modem */ #define ERR_OWN_FAD (0xcc40) /* reserved */ #define ERR_FAD_SUB_TRAIN (0xcc41) /* FAD in unknown substate during training */ #define ERR_FAD_SUB_TCF (0xcc42) /* FAD in unknown substate (TCF) */ #define ERR_FAD_SUB_MSG (0xcc43) /* FAD in unknown substate (MSG) */ #define ERR_GENERAL_FAD (0xcc50) /* reserved */ #define ERR_INVALID_DATA_RCV (0xcc51) /* invalid data received */ #define ERR_EMPTY_BUFFER (0xcc52) /* send/receive buffer is empty */ #define ERR_OVERFLOW_BCS_RCV (0xcc52) /* buffer overflow while receiving BCS data */ #define ERR_NOT_SET (0xccff) /* error not set */ /* * user defined constants */ #define DUMMY_FAD (0x0) #include "CDG_LEAVE.h" #endif