FreeCalypso > hg > fc-magnetite
view cdg3/cdginc-locosto/p_8010_136_simdrv_sap.val @ 636:57e67ca2e1cb
pcmdata.c: default +CGMI to "FreeCalypso" and +CGMM to model
The present change has no effect whatsoever on Falconia-made and Openmoko-made
devices on which /pcm/CGMI and /pcm/CGMM files have been programmed in FFS
with sensible ID strings by the respective factories, but what should AT+CGMI
and AT+CGMM queries return when the device is a Huawei GTM900 or Tango modem
that has been converted to FreeCalypso with a firmware change? Before the
present change they would return compiled-in defaults of "<manufacturer>" and
"<model>", respectively; with the present change the firmware will self-identify
as "FreeCalypso GTM900-FC" or "FreeCalypso Tango" on the two respective targets.
This firmware identification will become important if someone incorporates an
FC-converted GTM900 or Tango modem into a ZeroPhone-style smartphone where some
high-level software like ofono will be talking to the modem and will need to
properly identify this modem as FreeCalypso, as opposed to some other AT command
modem flavor with different quirks.
In technical terms, the compiled-in default for the AT+CGMI query (which will
always be overridden by the /pcm/CGMI file in FFS if one is present) is now
"FreeCalypso" in all configs on all targets; the compiled-in default for the
AT+CGMM query (likewise always overridden by /pcm/CGMM if present) is
"GTM900-FC" if CONFIG_TARGET_GTM900 or "Tango" if CONFIG_TARGET_TANGO or the
original default of "<model>" otherwise.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 19 Jan 2020 20:14:58 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_8010_136_simdrv_sap.val | | SOURCE : "sap\8010_136_SIMDRV_SAP.pdf" | | LastModified : "2004-06-10" | | IdAndVersion : "8010.136.03.009" | | SrcFileTime : "Thu Nov 29 09:27:56 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : SIMDRV * COMPATIBILITY_DEFINES : NO * ALWAYS_ENUM_IN_VAL_FILE: YES * ENABLE_GROUP: YES * CAPITALIZE_TYPENAME: NO */ #ifndef P_8010_136_SIMDRV_SAP_VAL #define P_8010_136_SIMDRV_SAP_VAL #define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL #define CDG_ENTER__FILENAME _P_8010_136_SIMDRV_SAP_VAL #define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__LAST_MODIFIED _2004_06_10 #define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__ID_AND_VERSION _8010_136_03_009 #define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_27_56_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL #undef CDG_ENTER__FILENAME /* * Enum to value table VAL_reset_return_val * CCDGEN:WriteEnum_Count==29 */ #ifndef __T_SIMDRV_VAL_reset_return_val__ #define __T_SIMDRV_VAL_reset_return_val__ typedef enum { SIMDRV_SIM_INSERTED = 0x0, /* A SIM is inserted and ATR/PPS was successful */ SIMDRV_SIM_NOT_INSERTED = 0x1, /* No SIM inserted (hardware detected) */ SIMDRV_INVALID_CARD = 0x2, /* Card is not responding or gives unintelligible answers, communications time out. */ SIMDRV_ME_FAILURE = 0x3, /* Power management related problems, e.g. voltage selection */ SIMDRV_IMPROPER_CALL_BACK = 0x4, /* simdrv_register function called with pointer improperly set, e.g. NULL. */ SIMDRV_ME_READER_NOT_AVAILABLE = 0x5 /* The reader requested is not available */ }T_SIMDRV_VAL_reset_return_val; #endif /* * Enum to value table VAL_len * CCDGEN:WriteEnum_Count==31 */ #ifndef __T_SIMDRV_VAL_len__ #define __T_SIMDRV_VAL_len__ typedef enum { SIMDRV_VAL_LEN__RANGE_MIN = 0x0, /* minimum */ SIMDRV_VAL_LEN__RANGE_MAX = 0x100, /* maximum */ SIMDRV_LENGTH_UNKNOWN = 0xffff /* Indicating that the length expected is unknown. */ }T_SIMDRV_VAL_len; #endif /* * Enum to value table VAL_sw1_2 * CCDGEN:WriteEnum_Count==33 */ #ifndef __T_SIMDRV_VAL_sw1_2__ #define __T_SIMDRV_VAL_sw1_2__ typedef enum { SIMDRV_ERR_NOCARD = 0x1, /* No SIM inserted (hardware detected) */ SIMDRV_ERR_NOT_RESET = 0x2, /* A reset has not been performed on the driver with the requested Id. */ SIMDRV_ERR_ME_FAIL = 0x3, /* Unrecoverable ME failure (for instance interrupt fails to occur) */ SIMDRV_ERR_RETRY_FAIL = 0x4, /* ME/SIM communication failed after certain retries, SIM reset required */ SIMDRV_ERR_PARAM_WRONG = 0x5 /* A driver function is called with invalid parameters */ }T_SIMDRV_VAL_sw1_2; #endif /* * Enum to value table VAL_cla * CCDGEN:WriteEnum_Count==35 */ #ifndef __T_SIMDRV_VAL_cla__ #define __T_SIMDRV_VAL_cla__ typedef enum { SIMDRV_GSM_CLASS_BYTE = 0xa0, /* GSM Class byte according to [GSM 11.11 / 3GPP 51.011] */ SIMDRV_UMTS_CLASS_BYTE = 0x80, /* UMTS Class byte according to [ETSI 102 221 10.1.2] */ SIMDRV_UICC_CLASS_BYTE = 0x0 /* UICC Class byte according to [ISO 7816-4] */ }T_SIMDRV_VAL_cla; #endif /* * Enum to value table VAL_ins * CCDGEN:WriteEnum_Count==37 */ #ifndef __T_SIMDRV_VAL_ins__ #define __T_SIMDRV_VAL_ins__ typedef enum { SIMDRV_INS_SELECT = 0xa4, /* Select Instruction */ SIMDRV_INS_STATUS = 0xf2, /* Status Instruction */ SIMDRV_INS_READ_BINARY = 0xb0, /* Read Binary Instruction */ SIMDRV_INS_UPDATE_BINARY = 0xd6, /* Update Binary Instruction */ SIMDRV_INS_READ_RECORD = 0xb2, /* Read Record Instruction */ SIMDRV_INS_UPDATE_RECORD = 0xdc, /* Update Record Instruction */ SIMDRV_INS_SEEK = 0xa2, /* Seek Instruction */ SIMDRV_INS_INCREASE = 0x32, /* Increase Instruction */ SIMDRV_INS_VERIFY_CHV = 0x20, /* Verify Chv Instruction */ SIMDRV_INS_CHANGE_CHV = 0x24, /* Change Chv Instruction */ SIMDRV_INS_DISABLE_CHV = 0x26, /* Disable Chv Instruction */ SIMDRV_INS_ENABLE_CHV = 0x28, /* Ensable Chv Instruction */ SIMDRV_INS_UNBLOCK_CHV = 0x2c, /* Unblock Chv Instruction */ SIMDRV_INS_INVALIDATE = 0x4, /* Invalidate Instruction */ SIMDRV_INS_REHABILITATE = 0x44, /* Rehabilitate Instruction */ SIMDRV_INS_AUTHENTICATE = 0x88, /* Run GSM Algorithm (2/2.5G) / Authenticate (3G) Instruction */ SIMDRV_INS_TERMINAL_PROFILE = 0x10, /* Terminal Profile Instruction */ SIMDRV_INS_ENVELOPE = 0xc2, /* Envelope Instruction */ SIMDRV_INS_FETCH = 0x12, /* Fetch Instruction */ SIMDRV_INS_TERMINAL_RESPONSE = 0x14, /* Terminal Response Instruction */ SIMDRV_INS_GET_RESPONSE = 0xc0 /* Get Response Instruction */ }T_SIMDRV_VAL_ins; #endif /* * Enum to value table VAL_voltage_select * CCDGEN:WriteEnum_Count==39 */ #ifndef __T_SIMDRV_VAL_voltage_select__ #define __T_SIMDRV_VAL_voltage_select__ typedef enum { SIMDRV_REQ_VOLTAGE_SEL = 0x0, /* The SIM reader driver shall perform voltage selection */ SIMDRV_OMIT_VOLTAGE_SEL = 0x1 /* The SIM reader driver shall restart with the current voltage */ }T_SIMDRV_VAL_voltage_select; #endif /* * Enum to value table VAL_config_requested * CCDGEN:WriteEnum_Count==41 */ #ifndef __T_SIMDRV_VAL_config_requested__ #define __T_SIMDRV_VAL_config_requested__ typedef enum { SIMDRV_OMIT_CONFIG_CHARACTERISTICS = 0x0, /* PS Shall not retrieve Configuration Characteristics */ SIMDRV_REQUEST_CONFIG_CHARACTERISTICS = 0x1 /* PS Shall retrieve Configuration Characteristics */ }T_SIMDRV_VAL_config_requested; #endif /* * Enum to value table VAL_reader_id * CCDGEN:WriteEnum_Count==43 */ #ifndef __T_SIMDRV_VAL_reader_id__ #define __T_SIMDRV_VAL_reader_id__ typedef enum { SIMDRV_VAL_READER_ID__RANGE_MIN = 0x1, /* minimum */ SIMDRV_VAL_READER_ID__RANGE_MAX = 0x2 /* maximum */ }T_SIMDRV_VAL_reader_id; #endif /* * user defined constants */ #define SIMDRV_SIZE_ATR_INFO (0x21) #define SIMDRV_MIN_RESULT (0x1) #define SIMDRV_MAX_RESULT (0x100) #define SIMDRV_MIN_DATA_SIZE (0x1) #define SIMDRV_MAX_DATA_SIZE (0xff) #define SIMDRV_MAX_READERS (0x2) #include "CDG_LEAVE.h" #endif