view cdg3/cdginc-locosto/p_rrlc.val @ 636:57e67ca2e1cb

pcmdata.c: default +CGMI to "FreeCalypso" and +CGMM to model The present change has no effect whatsoever on Falconia-made and Openmoko-made devices on which /pcm/CGMI and /pcm/CGMM files have been programmed in FFS with sensible ID strings by the respective factories, but what should AT+CGMI and AT+CGMM queries return when the device is a Huawei GTM900 or Tango modem that has been converted to FreeCalypso with a firmware change? Before the present change they would return compiled-in defaults of "<manufacturer>" and "<model>", respectively; with the present change the firmware will self-identify as "FreeCalypso GTM900-FC" or "FreeCalypso Tango" on the two respective targets. This firmware identification will become important if someone incorporates an FC-converted GTM900 or Tango modem into a ZeroPhone-style smartphone where some high-level software like ofono will be talking to the modem and will need to properly identify this modem as FreeCalypso, as opposed to some other AT command modem flavor with different quirks. In technical terms, the compiled-in default for the AT+CGMI query (which will always be overridden by the /pcm/CGMI file in FFS if one is present) is now "FreeCalypso" in all configs on all targets; the compiled-in default for the AT+CGMM query (likewise always overridden by /pcm/CGMM if present) is "GTM900-FC" if CONFIG_TARGET_GTM900 or "Tango" if CONFIG_TARGET_TANGO or the original default of "<model>" otherwise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 19 Jan 2020 20:14:58 +0000
parents c15047b3d00d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_rrlc.val                                                     |
| SOURCE  : "sap\rrlc.pdf"                                                 |
| LastModified : "2002-10-11"                                              |
| IdAndVersion : "8443.101.02.008"                                         |
| SrcFileTime  : "Thu Nov 29 09:52:52 2007"                                |
| Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_RRLC_VAL
#define P_RRLC_VAL


#define CDG_ENTER__P_RRLC_VAL

#define CDG_ENTER__FILENAME _P_RRLC_VAL
#define CDG_ENTER__P_RRLC_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_RRLC_VAL__LAST_MODIFIED _2002_10_11
#define CDG_ENTER__P_RRLC_VAL__ID_AND_VERSION _8443_101_02_008

#define CDG_ENTER__P_RRLC_VAL__SRC_FILE_TIME _Thu_Nov_29_09_52_52_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_RRLC_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_cause
 */
#define LCS_OK                         (0x0)      /* no error                       */
#define LCS_WRONG_BTS                  (0xa)      /* Serving Cell BTS differs from Reference BTS */
#define LCS_HANDOVER                   (0x14)     /* handover occured during Position Measurement procedure */

/*
 * Value constants for VAL_sb_flag
 */
#define EOTD_INVALID                   (0x0)      /* invalid data                   */
#define EOTD_VALID                     (0x1)      /* valid data                     */

/*
 * Value constants for VAL_eotd_mode
 */
#define EOTD_IDLE                      (0x0)      /* Idle mode                      */
#define EOTD_DEDIC                     (0x1)      /* Dedicated or packet mode       */

/*
 * Value constants for VAL_exp_otd
 */

/*
 * Value constants for VAL_fn
 */
#define FNMAX                          (0x297000) /* max Frame Number + 1 (26*51*2048) */

/*
 * Value constants for VAL_mfrm_offset
 */

/*
 * Value constants for VAL_otd_type
 */
#define ROUGH_RTD                      (0x0)      /* only rough RTD has been provided by the NW */
#define EXPECTED_OTD                   (0x1)      /* only expectedOTD has been provided by the NW */
#define BOTH_OTD                       (0x2)      /* Both OTD / RTD types have been provided by the NW */

/*
 * Value constants for VAL_rough_rtd
 */

/*
 * Value constants for VAL_tav
 */
#define TA_NOT_AVAIL                   (0xff)     /* no Timing Advance in Idle Mode */

/*
 * Value constants for VAL_uncertainty
 */
#define UNC_MAX_2BIT                   (0x0)      /* uncertainty in bits. 0 - 2 bits */
#define UNC_MAX_4BIT                   (0x1)      /* uncertainty in bits. 3 - 4 bits */
#define UNC_MAX_8BIT                   (0x2)      /* uncertainty in bits. 5 - 8 bits */
#define UNC_MAX_12BIT                  (0x3)      /* uncertainty in bits. 9 - 12 bits */
#define UNC_MAX_16BIT                  (0x4)      /* uncertainty in bits. 13 - 16 bits */
#define UNC_MAX_22BIT                  (0x5)      /* uncertainty in bits. 17 - 22 bits */
#define UNC_MAX_30BIT                  (0x6)      /* uncertainty in bits. 23 - 30 bits */
#define UNC_GT_30BIT                   (0x7)      /* uncertainty in bits.  > 30 bits */

/*
 * user defined constants
 */
#define MAX_NCELL_EOTD_L1              (0xc)      
#define MAX_NCELL_EOTD                 (0xf)      
#define MAX_NCELL_EOTD_SI              (0x20)     
#define XCOR_NO                        (0x12)     

#include "CDG_LEAVE.h"


#endif