pcmdata.c: default +CGMI to "FreeCalypso" and +CGMM to model The present change has no effect whatsoever on Falconia-made and Openmoko-made devices on which /pcm/CGMI and /pcm/CGMM files have been programmed in FFS with sensible ID strings by the respective factories, but what should AT+CGMI and AT+CGMM queries return when the device is a Huawei GTM900 or Tango modem that has been converted to FreeCalypso with a firmware change? Before the present change they would return compiled-in defaults of "<manufacturer>" and "<model>", respectively; with the present change the firmware will self-identify as "FreeCalypso GTM900-FC" or "FreeCalypso Tango" on the two respective targets. This firmware identification will become important if someone incorporates an FC-converted GTM900 or Tango modem into a ZeroPhone-style smartphone where some high-level software like ofono will be talking to the modem and will need to properly identify this modem as FreeCalypso, as opposed to some other AT command modem flavor with different quirks. In technical terms, the compiled-in default for the AT+CGMI query (which will always be overridden by the /pcm/CGMI file in FFS if one is present) is now "FreeCalypso" in all configs on all targets; the compiled-in default for the AT+CGMM query (likewise always overridden by /pcm/CGMM if present) is "GTM900-FC" if CONFIG_TARGET_GTM900 or "Tango" if CONFIG_TARGET_TANGO or the original default of "<model>" otherwise.

#ifndef __L1SW_CFG__
#define __L1SW_CFG__
#define AMR 1
#define CUST 0
#define DCO_ALGO 0
#define IDS 1
#define L1_12NEIGH 1
#define L1_EOTD 0
#define L1_EOTD_QBIT_ACC 0
#define L1_GPRS 1
#define L1_GTT 0
#define L1_MIDI 0
#define L1_VOICE_MEMO_AMR 1
#define MELODY_E2 1
#define OP_L1_STANDALONE 0
#define OP_RIV_AUDIO 1
#define ORDER2_TX_TEMP_CAL 1
#define RAZ_VULSWITCH_REGAUDIO 0
#define SECURITY 0
#define SPEECH_RECO 1
#define TESTMODE 1
#define TRACE_TYPE 4
#define VCXO_ALGO 1
#endif /* __L1SW_CFG__ */