FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_app/ffs/board/intelsbdrv.c @ 636:57e67ca2e1cb
pcmdata.c: default +CGMI to "FreeCalypso" and +CGMM to model
The present change has no effect whatsoever on Falconia-made and Openmoko-made
devices on which /pcm/CGMI and /pcm/CGMM files have been programmed in FFS
with sensible ID strings by the respective factories, but what should AT+CGMI
and AT+CGMM queries return when the device is a Huawei GTM900 or Tango modem
that has been converted to FreeCalypso with a firmware change? Before the
present change they would return compiled-in defaults of "<manufacturer>" and
"<model>", respectively; with the present change the firmware will self-identify
as "FreeCalypso GTM900-FC" or "FreeCalypso Tango" on the two respective targets.
This firmware identification will become important if someone incorporates an
FC-converted GTM900 or Tango modem into a ZeroPhone-style smartphone where some
high-level software like ofono will be talking to the modem and will need to
properly identify this modem as FreeCalypso, as opposed to some other AT command
modem flavor with different quirks.
In technical terms, the compiled-in default for the AT+CGMI query (which will
always be overridden by the /pcm/CGMI file in FFS if one is present) is now
"FreeCalypso" in all configs on all targets; the compiled-in default for the
AT+CGMM query (likewise always overridden by /pcm/CGMM if present) is
"GTM900-FC" if CONFIG_TARGET_GTM900 or "Tango" if CONFIG_TARGET_TANGO or the
original default of "<model>" otherwise.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 19 Jan 2020 20:14:58 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/****************************************************************************** * Flash File System (ffs) * Idea, design and coding by Mads Meisner-Jensen, mmj@ti.com * * FFS AMD single bank low level flash driver RAM code * * $Id: intelsbdrv.c 1.13 Thu, 08 Jan 2004 15:05:23 +0100 tsj $ * ******************************************************************************/ #include "ffs.cfg" #include "ffs/ffs.h" #include "ffs/board/drv.h" #include "ffs/board/ffstrace.h" #define INTEL_UNLOCK_SLOW 1 #undef tlw #define tlw(contents) #undef ttw #define ttw(contents) // Status bits for Intel flash memory devices #define INTEL_STATE_MACHINE_DONE (1<<7) #define FLASH_READ(addr) (*(volatile uint16 *) (addr)) #define FLASH_WRITE(addr, data) (*(volatile uint16 *) (addr)) = data asm(" .label _ffsdrv_ram_intel_begin"); asm(" .def _ffsdrv_ram_intel_begin"); uint32 intel_int_disable(void); void intel_int_enable(uint32 tmp); /****************************************************************************** * INTEL Single Bank Driver Functions ******************************************************************************/ // Actually we should have disabled and enable the interrupts in this // function, but when the interrupt functions are used Target don't run! // Anyway, currently the interrupts are already disabled at this point thus // it does not cause any problems. int ffsdrv_ram_intel_sb_init(void) { uint32 cpsr, i; volatile char *addr; uint16 status; for (i = 0; i < dev.numblocks; i++) { addr = block2addr(i); *addr = 0x50; // Intel Clear Status Register *addr = 0xFF; // Intel read array *addr = 0x60; // Intel Config Setup *addr = 0xD0; // Intel Unlock Block // Wait for unlock to finish do { status = FLASH_READ(addr); } while (!(status & INTEL_STATE_MACHINE_DONE)); *addr = 0x70; // Intel Read Status Register status = FLASH_READ(addr); // Is there an erase suspended? if ((status & 0x40) != 0) { *addr = 0xD0; // Intel erase resume *addr = 0x70; // Intel Read Status Register // wait for erase to finish do { status = FLASH_READ(addr); } while (!(status & INTEL_STATE_MACHINE_DONE)); } *addr = 0xFF; // Intel Read Array } return 0; } void ffsdrv_ram_intel_sb_write_halfword(volatile uint16 *addr, uint16 value) { uint32 cpsr; ttw(ttr(TTrDrv, "wh(%x,%x)" NL, addr, value)); if (~*addr & value) { ttw(ttr(TTrFatal, "wh(%x,%x->%x) fatal" NL, addr, *addr, value)); return; } cpsr = intel_int_disable(); tlw(led_on(LED_WRITE)); #if (INTEL_UNLOCK_SLOW == 1) *addr = 0x60; // Intel Config Setup *addr = 0xD0; // Intel Unlock Block #endif *addr = 0x50; // Intel Clear Status Register *addr = 0x40; // Intel program byte/word *addr = value; while ((*addr & 0x80) == 0) ; *addr = 0xFF; // Intel read array tlw(led_off(LED_WRITE)); intel_int_enable(cpsr); } void ffsdrv_ram_intel_sb_erase(uint8 block) { volatile char *addr; uint32 cpsr; uint16 poll; ttw(ttr(TTrDrvEra, "e(%d)" NL, block)); addr = block2addr(block); cpsr = intel_int_disable(); tlw(led_on(LED_ERASE)); #if (INTEL_UNLOCK_SLOW == 1) *addr = 0x60; // Intel Config Setup *addr = 0xD0; // Intel Unlock Block #endif *addr = 0x50; // Intel Clear Status Register *addr = 0x20; // Intel Erase Setup *addr = 0xD0; // Intel Erase Confirm *addr = 0x70; // Intel Read Status Register // Wait for erase to finish. while ((*addr & 0x80) == 0) { tlw(led_toggle(LED_ERASE)); // Poll interrupts, taking interrupt mask into account. if (INT_REQUESTED) { // 1. suspend erase // 2. enable interrupts // .. now the interrupt code executes // 3. disable interrupts // 4. resume erase tlw(led_on(LED_ERASE_SUSPEND)); *addr = 0xB0; // Intel Erase Suspend *addr = 0x70; // Intel Read Status Register while (((poll = *addr) & 0x80) == 0) ; // If erase is complete, exit immediately if ((poll & 0x40) == 0) break; *addr = 0xFF; // Intel read array tlw(led_off(LED_ERASE_SUSPEND)); intel_int_enable(cpsr); // Other interrupts and tasks run now... cpsr = intel_int_disable(); tlw(led_on(LED_ERASE_SUSPEND)); *addr = 0xD0; // Intel erase resume // The following "extra" Read Status command is required because Intel has // changed the specification of the W30 flash! (See "1.8 Volt Intel® // Wireless Flash Memory with 3 Volt I/O 28F6408W30, 28F640W30, 28F320W30 // Specification Update") *addr = 0x70; // Intel Read Status Register tlw(led_off(LED_ERASE_SUSPEND)); } } *addr = 0xFF; // Intel read array tlw(led_on(LED_ERASE)); tlw(led_off(LED_ERASE)); intel_int_enable(cpsr); } // TODO: remove below function, not in use anymore. void ffsdrv_ram_intel_erase(uint8 block) { uint32 cpsr; uint16 status; ttw(ttr(TTrDrvErase, "e(%d)" NL, block)); tlw(led_on(LED_ERASE)); dev.addr = (uint16 *) block2addr(block); cpsr = intel_int_disable(); dev.state = DEV_ERASE; *dev.addr = 0x60; // Intel Config setup *dev.addr = 0xD0; // Intel Unlock block *dev.addr = 0x50; // Intel clear status register (not really necessary) *dev.addr = 0x20; // Intel erase setup *dev.addr = 0xD0; // Intel erase confirm intel_int_enable(cpsr); while ((*dev.addr & 0x80) == 0) ; *dev.addr = 0xFF; // Intel read array dev.state = DEV_READ; tlw(led_off(LED_WRITE)); } /****************************************************************************** * Interrupt Enable/Disable ******************************************************************************/ uint32 intel_int_disable(void) { asm(" .state16"); asm(" mov A1, #0xC0"); asm(" ldr A2, tct_intel_disable"); asm(" bx A2 "); asm("tct_intel_disable .field _TCT_Control_Interrupts+0,32"); asm(" .global _TCT_Control_Interrupts"); } void intel_int_enable(uint32 cpsr) { asm(" .state16"); asm(" ldr A2, tct_intel_enable"); asm(" bx A2 "); asm("tct_intel_enable .field _TCT_Control_Interrupts+0,32"); asm(" .global _TCT_Control_Interrupts"); } // Even though we have this end label, we cannot determine the number of // constant/PC-relative data following the code! asm(" .state32"); asm(" .label _ffsdrv_ram_intel_end"); asm(" .def _ffsdrv_ram_intel_end");