view src/g23m-fad/ip/ip.h @ 636:57e67ca2e1cb

pcmdata.c: default +CGMI to "FreeCalypso" and +CGMM to model The present change has no effect whatsoever on Falconia-made and Openmoko-made devices on which /pcm/CGMI and /pcm/CGMM files have been programmed in FFS with sensible ID strings by the respective factories, but what should AT+CGMI and AT+CGMM queries return when the device is a Huawei GTM900 or Tango modem that has been converted to FreeCalypso with a firmware change? Before the present change they would return compiled-in defaults of "<manufacturer>" and "<model>", respectively; with the present change the firmware will self-identify as "FreeCalypso GTM900-FC" or "FreeCalypso Tango" on the two respective targets. This firmware identification will become important if someone incorporates an FC-converted GTM900 or Tango modem into a ZeroPhone-style smartphone where some high-level software like ofono will be talking to the modem and will need to properly identify this modem as FreeCalypso, as opposed to some other AT command modem flavor with different quirks. In technical terms, the compiled-in default for the AT+CGMI query (which will always be overridden by the /pcm/CGMI file in FFS if one is present) is now "FreeCalypso" in all configs on all targets; the compiled-in default for the AT+CGMM query (likewise always overridden by /pcm/CGMM if present) is "GTM900-FC" if CONFIG_TARGET_GTM900 or "Tango" if CONFIG_TARGET_TANGO or the original default of "<model>" otherwise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 19 Jan 2020 20:14:58 +0000
parents 90eb61ecd093
children
line wrap: on
line source

/*
+----------------------------------------------------------------------------
|  Project :  GSM-WAP (8444)
|  Modul   :  IP
+----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+----------------------------------------------------------------------------
|  Purpose :  Definitions for the Protocol Stack Entity
|             Internet Protocol
+----------------------------------------------------------------------------
*/

#ifndef IP_H
#define IP_H

/*-------------------------------------------------------------------------*/

#if defined WIN32 && ! defined _SIMULATION_
  #define _SIMULATION_
#endif

#ifdef _SIMULATION_
  #undef _TARGET_
#else
  #ifndef _TARGET_
    #define _TARGET_
  #endif
#endif

/* Information for DTI library */

#define IP_DTI_DEF_INSTANCE        0
#define IP_DTI_HL_INTERFACE        0
#define IP_DTI_LL_INTERFACE        1
#define IP_DTI_DEF_CHANNEL         0

#define IP_DTI_UPLINK_QUEUE_SIZE   0
#define IP_DTI_DOWNLINK_QUEUE_SIZE 0

/*==== Types =======================================================*/

/* Instance management */

#ifdef OPTION_MULTI_INSTANCE
  #define GET_INSTANCE(p) (ip_data_base + p->custom.route.inst_no)
  #define IP_INSTANCES MAX_INSTANCES
#else
  #define GET_INSTANCE(p) ip_data_base
  #define IP_INSTANCES 1
#endif

/*==== Constants ============================================================*/

#define MAX_LAYER 1 /* Connected to layers */

/* States for send and receive packets */

/* Constants for the IP packet */

#define MIN_HEADER_LEN    5 /* Min IP header length in 32 bit words */
#define MAX_PACKET_LEN 1500 /* Max packet len from higher layer */

/* Segmenting states and parameter */

#define NO_SEGMENTS          0 /* Normal packet */
#define SEND_SEGMENT         1 /* Sending segments */
#define READ_SEGMENT         2 /* Read segment */
#define GO_ON_SEGMENTING    10 /* Fragmenting ok - go on */
#define NO_SPACE_SEGMENTING 10 /* Not possible to sort cs. of less space */
#define MAX_SEGMENTS        50 /* Max received segments */
#define MAX_SEGM_SERVER      1 /* Max active server by rec. segments */

/* Errors */

#define NO_ERROR          0 /* No errors found */
#define ERR_PACKET_LEN    1 /* Packet length error */
#define CHANGE_PACKET_LEN 2 /* Length desc_list > total len indicated in header */

/* IP addresses */

#define MAX_ADDR_TYPES   15 /* Max field address-types */
#define MCAST_ADDR        0 /* Multicast address or class D address */
#define LINK_LAYER_BCAST  1 /* Link layer broadcast address */
#define LOOP_BACK_ADDR    2 /* Loopback address */
#define CLASS_E_ADDR      3 /* Class E address */
#define NO_DEST_ADDR      4 /* No destination address */
#define BCAST_ADDR_255    5 /* Broadcast address 255.255.255.255 */
#define NETW_ADDR         6 /* Network address */
#define CLASS_A_ADDR      7 /* Class A address */
#define CLASS_B_ADDR      8 /* Class B address */
#define CLASS_C_ADDR      9 /* Class C address */
#define DEFAULT_R_ADDR   10 /* Default route address */
#define BAD_UL_SRC_ADDR  11 /* Indicate bad uplink source address */
#define BAD_DL_SRC_ADDR  12 /* Indicate bad downlink source address */
#define BAD_UL_DEST_ADDR 13 /* Indicate bad uplink destination address */
#define BAD_DL_DEST_ADDR 14 /* Indicate bad uplink destination address */

/* Only for testing */

#define TEST_SRC_ADDR  0x0a0b0c0d /* Source test address */
#define TEST_DEST_ADDR 0x0a0b0c0e /* Destination test address */

/* Type of primitives */

#define P_DTI_READY       0
#define P_DTI_DATA_REQ    1
#define P_DTI_GETDATA_REQ 2
#define P_DTI_DATA_IND    3

/* Bit offset for encoding/decoding */

#define ENCODE_OFFSET 0

/* Timer */

#define TREASSEMBLY 0 /* Reassembly timer */

/* Timeout for reassembly segments */

#define TIME_REASSEMBLY 30000 /* 30 - 60 seconds is the correct value */

/* Dynamic configuration numbers */

#define RESET       0
#define FRAME_TRACE 6

/* State index for the entity process/services */

#define KER   ker.
#define HILA hila.
#define LOLA lola.

/* States of the entity process kernel */

#define DEACTIVATED 0
#define ACTIVE_NC   1 /* Not configured */
#define CONNECTED   2

/* States for send and receive packet services */

#define DOWN       0 /* State not active */
#define CONNECTING 1 /* State is connecting */
#define IDLE       2 /* State no incoming signals */
#define SEND       3 /* State sending packet */
#define WAIT       4 /* State waiting for packet */

/* For trace purposes */

#ifndef NTRACE
  #define SERVICE_NAME_KER   "KER"
  #define SERVICE_NAME_HILA "HILA"
  #define SERVICE_NAME_LOLA "LOLA"
#endif

/*============ TYPES ======================================================*/

/* Global variable-structure for uplink */

typedef struct
{
  UBYTE state; /* State uplink */
#ifndef NTRACE
  char * name;
  char * state_name;
#endif
  T_DTI2_DATA_REQ * dti_data_req; /* Data primitive uplink */
  BOOL drop_packet; /* TRUE: not sending packet to lower layer */
  UBYTE ttl; /* Time to live */
  USHORT segment_id; /* Number of the segment packet */
  USHORT header_len; /* Header length */
  UBYTE state_segment; /* State segmenting uplink */
  ULONG next_segment_desc; /* Pointer to next segment desc */
  USHORT last_segment_pos; /* Last position for copy in next_segment_desc */
  USHORT segment_offset; /* Offset for segmenting */
  USHORT sended_segment_len; /* Sended segment length include header */
  USHORT list_len_segment; /* Listlength of the income datagram */
  UBYTE segment_prot; /* Protokoll higher layer by fragmenting */
  T_desc2 * first_desc_segment; /* First desc for sending */
  USHORT identity; /* Sets the identity */
} T_HILA;

/* Global variable-structure for downlink */

typedef struct
{
  UBYTE state; /* State downlink */
#ifndef NTRACE
  char * name;
  char * state_name;
#endif
  T_DTI2_DATA_IND * dti_data_ind; /* Inputbuffer from higher layer */
  T_DTI2_DATA_IND * data_ind_reassembly [MAX_SEGM_SERVER]; /* For receiving segments */
  BOOL drop_packet; /* TRUE: not sending packet to lower layer */
  USHORT header_len; /* Header length */
  UBYTE state_reassembly [MAX_SEGM_SERVER]; /* State segmenting uplink */
  BOOL got_first_segment [MAX_SEGM_SERVER]; /* Got first segment by reassembling */
  BOOL got_last_segment [MAX_SEGM_SERVER]; /* Got last segment */
  ULONG ip_source_addr_segment [MAX_SEGM_SERVER]; /* IP source address for segment */
  USHORT pos_server; /* Position of fragmenting server */
  USHORT id_reassemble [MAX_SEGM_SERVER]; /* Identity of the reassemble fragments */
  UBYTE prot_reassemble [MAX_SEGM_SERVER]; /* Protocol reassembly */
  UBYTE timer_reass_running [MAX_SEGM_SERVER]; /* Timer is running */
  ULONG sort_reass_array [2] [MAX_SEGMENTS]; /* Used to sort the incoming fragments */
} T_LOLA;

/* Entity data for each IP instance */

typedef struct
{
  UBYTE state; /* State variables for each process */
#ifndef NTRACE
  char * name;
  char * state_name;
#endif
  ULONG source_addr;/* Source IP address */
  ULONG dst_addr; /* Destination address */
  ULONG peer_addr; /* Destination address for routing */
  ULONG netmask; /* Netmask for the routing table */
  char entity_name_hl [IPA_ENTITY_NAME_LEN]; /* Entity name higher layer */
  char entity_name_ll [IPA_ENTITY_NAME_LEN]; /* Entity name lower layer */
  ULONG link_id_hl;
  ULONG link_id_ll;
  USHORT mtu; /* Maximum transfer unit */
  BOOL send_icmp; /* ICMP message shall be sent */
  T_DTI2_DATA_REQ * icmp_dti_data_req; /* For sending ICMP message to uplink */
} T_KER;

typedef struct
{
  T_HILA hila; /* Data for each higher layer */
  T_LOLA lola; /* Data for each lower layer */
  T_KER ker;
} T_IP_DATA;

#ifdef GPRS
  typedef enum
  {
    UNIT_INVALID = -1,
    UNIT_SNDCP,
    UNIT_ACI,
    UNIT_UART,
    UNIT_PPPS,
    UNIT_PPPC,
    UNIT_L2R,
    UNIT_T30,
    UNIT_IP,
    UNIT_TRA,
    UNIT_UDP,
    UNIT_WAP,
    UNIT_MTST,
    UNIT_BLUETOOTH,
    UNIT_NULL,
    UNIT_MAX
  } IP_UNIT_ID;
#endif

/*==== EXPORT =====================================================*/

/* Data base */

extern DTI_HANDLE ip_hDTI;

/* Instance data base */

extern T_IP_DATA ip_data_base [], * ip_data;

/* DTI data base. The data base is allocated in function dti_init(). */

extern DTI_HANDLE udp_hDTI;

#define ENTITY_DATA ip_data

/* Prototypes timer */

#ifdef OPTION_MULTITHREAD
  #define tim_init_timer       _ENTITY_PREFIXED (tim_init_timer)
  #define tim_set_timeout_flag _ENTITY_PREFIXED (tim_set_timeout_flag)
  #define tim_handle_timeout   _ENTITY_PREFIXED (tim_handle_timeout)
  #define tim_flush_fifo       _ENTITY_PREFIXED (tim_flush_fifo)
  #define tim_reassembly       _ENTITY_PREFIXED (tim_reassembly)
#endif

BOOL tim_init_timer (void);

/* Timer specific timeout handling routines */

void tim_reassembly (/* USHORT layer, USHORT segm_server */);

/* Prototypes customer specific functions */

#ifdef OPTION_MULTITHREAD
  #define csf_init_timer  _ENTITY_PREFIXED (csf_init_timer)
  #define csf_close_timer _ENTITY_PREFIXED (csf_close_timer)
#endif

BOOL csf_init_timer (void);
void csf_close_timer (void);
void csf_stop_timer (USHORT index);
BOOL csf_timer_expired (
  USHORT index,
  USHORT * layer,
  USHORT * segm_server,
  USHORT * timer
);

/*==== Prototypes ==================================================*/

/* Prototypes
 *
 * IP KERNEL
 *
 * KERNEL primitive processing
 */

#ifdef OPTION_MULTITHREAD
  #define ker_ipa_activate_req   _ENTITY_PREFIXED (ker_ipa_activate_req)
  #define ker_ipa_deactivate_req _ENTITY_PREFIXED (ker_ipa_deactivate_req)
  #define ker_ipa_config_req     _ENTITY_PREFIXED (ker_ipa_config_req)
  #define ker_ip_addr_req        _ENTITY_PREFIXED (ker_ip_addr_req)

  #define sig_dti_ker_connection_opened_hl_ind \
    _ENTITY_PREFIXED (sig_dti_ker_connection_opened_hl_ind)
  #define sig_dti_ker_connection_opened_ll_ind \
    _ENTITY_PREFIXED (sig_dti_ker_connection_opened_ll_ind)
  #define sig_dti_ker_connection_closed_hl_ind \
    _ENTITY_PREFIXED (sig_dti_ker_connection_closed_hl_ind)
  #define sig_dti_ker_connection_closed_ll_ind \
    _ENTITY_PREFIXED (sig_dti_ker_connection_closed_ll_ind)
  #define sig_dti_ker_data_received_hl_ind \
    _ENTITY_PREFIXED (sig_dti_ker_data_received_hl_ind)
  #define sig_dti_ker_tx_buffer_ready_ll_ind \
    _ENTITY_PREFIXED (sig_dti_ker_tx_buffer_ready_ll_ind)
  #define sig_dti_ker_tx_buffer_full_hl_ind \
    _ENTITY_PREFIXED (sig_dti_ker_tx_buffer_full_hl_ind)
  #define sig_dti_ker_data_received_ll_ind \
    _ENTITY_PREFIXED (sig_dti_ker_data_received_ll_ind)
  #define sig_dti_ker_tx_buffer_ready_hl_ind \
    _ENTITY_PREFIXED (sig_dti_ker_tx_buffer_ready_hl_ind)
  #define sig_dti_ker_tx_buffer_full_ll_ind \
    _ENTITY_PREFIXED (sig_dti_ker_tx_buffer_full_ll_ind)

  #define pei_dti_dti_connect_req    _ENTITY_PREFIXED (pei_dti_dti_connect_req)
  #define pei_dti_dti_connect_cnf    _ENTITY_PREFIXED (pei_dti_dti_connect_cnf)
  #define pei_dti_dti_connect_ind    _ENTITY_PREFIXED (pei_dti_dti_connect_ind)
  #define pei_dti_dti_connect_res    _ENTITY_PREFIXED (pei_dti_dti_connect_res)
  #define pei_dti_dti_disconnect_req _ENTITY_PREFIXED (pei_dti_dti_disconnect_req)
  #define pei_dti_dti_disconnect_ind _ENTITY_PREFIXED (pei_dti_dti_disconnect_ind)
  #define pei_dti_dti_ready_ind      _ENTITY_PREFIXED (pei_dti_dti_ready_ind)
  #define pei_dti_dti_data_req       _ENTITY_PREFIXED (pei_dti_dti_data_req)
  #define pei_dti_dti_data_ind       _ENTITY_PREFIXED (pei_dti_dti_data_ind)
  #define pei_dti_dti_getdata_req    _ENTITY_PREFIXED (pei_dti_dti_getdata_req)

  #ifdef _SIMULATION_
    #define pei_dti_dti_data_test_req _ENTITY_PREFIXED (pei_dti_dti_data_test_req)
    #define pei_dti_dti_data_test_ind _ENTITY_PREFIXED (pei_dti_dti_data_test_ind)
  #endif

  #define pei_sig_callback _ENTITY_PREFIXED (pei_sig_callback)

  #define ip_packet_validator  _ENTITY_PREFIXED (ip_packet_validator)
  #define check_ip_address     _ENTITY_PREFIXED (check_ip_address)
  #define chk_packet_len       _ENTITY_PREFIXED (chk_packet_len)
  #define ip_addr_int_to_byte  _ENTITY_PREFIXED (ip_addr_int_to_byte)
  #define build_ip_packet      _ENTITY_PREFIXED (build_ip_packet)
  #define init_ip              _ENTITY_PREFIXED (init_ip)
  #define sort_descs_id_up     _ENTITY_PREFIXED (sort_descs_id_up)
  #define reassemble_fragments _ENTITY_PREFIXED (reassemble_fragments)
  #define config_down_ll       _ENTITY_PREFIXED (config_down_ll)
  #define terminate_ip         _ENTITY_PREFIXED (terminate_ip)
#endif

/* IPA SAP */

void ker_ipa_dti_req (T_IPA_DTI_REQ * ipa_dti_req);
void ker_ipa_config_req (T_IPA_CONFIG_REQ * ipa_config_req);

/* IP SAP */

void ker_ip_addr_req (T_IP_ADDR_REQ * ip_addr_req);

/* Wrapping functions for DTI library primitives */

void pei_dti_dti_connect_req (T_DTI2_CONNECT_REQ * dti_connect_req);
void pei_dti_dti_connect_cnf (T_DTI2_CONNECT_CNF * dti_connect_cnf);
void pei_dti_dti_connect_ind (T_DTI2_CONNECT_IND * dti_connect_ind);
void pei_dti_dti_connect_res (T_DTI2_CONNECT_RES * dti_connect_res);
void pei_dti_dti_disconnect_req (T_DTI2_DISCONNECT_REQ * dti_disconnect_req);
void pei_dti_dti_disconnect_ind (T_DTI2_DISCONNECT_IND * dti_disconnect_ind);
void pei_dti_dti_data_req (T_DTI2_DATA_REQ * dti_data_req);
void pei_dti_dti_getdata_req (T_DTI2_GETDATA_REQ * dti_getdata_req);
void pei_dti_dti_data_ind (T_DTI2_DATA_IND * dti_data_ind);
void pei_dti_dti_ready_ind (T_DTI2_READY_IND * dti_ready_ind);
#ifdef _SIMULATION_
  void pei_dti_dti_data_test_req (T_DTI2_DATA_TEST_REQ * dti_data_test_req);
  void pei_dti_dti_data_test_ind (T_DTI2_DATA_TEST_IND * dti_data_test_ind);
#endif

/* UP DTI */

void sig_dti_ker_data_received_hl_ind (T_DTI2_DATA_REQ * dti_data_req);
void sig_dti_ker_connection_opened_hl_ind ();
void sig_dti_ker_connection_closed_hl_ind ();
void sig_dti_ker_tx_buffer_ready_ll_ind ();
void sig_dti_ker_tx_buffer_full_hl_ind ();

/* DN DTI */

void sig_dti_ker_data_received_ll_ind (T_DTI2_DATA_IND * dti_data_ind);
void sig_dti_ker_connection_opened_ll_ind ();
void sig_dti_ker_connection_closed_ll_ind ();
void sig_dti_ker_tx_buffer_ready_hl_ind ();
void sig_dti_ker_tx_buffer_full_ll_ind ();

/* DTILIB callback function */

void pei_sig_callback (
  U8 instance,
  U8 interfac,
  U8 channel,
  U8 reason,
  T_DTI2_DATA_IND * dti_data_ind
);

/* Functions in ip_kerf.c */

BOOL ip_packet_validator (T_desc_list2 * desc_list);
void build_ip_packet (BOOL uplink, UBYTE select);
void init_ip (void);
void terminate_ip (void);
void config_down_ll (void);
void check_ip_address (
  BOOL * addr_type_dest,
  BOOL * addr_type_src,
  ULONG dest_addr,
  ULONG src_addr
);
void ip_addr_int_to_byte (UBYTE * b_values, ULONG ul_value);
UBYTE chk_packet_len (UBYTE * ip_header, T_desc_list2 * desc_list);
USHORT sort_descs_id_up (
  T_desc_list2 * desc_list,
  ULONG sort_array[2][MAX_SEGMENTS]
);
void reassemble_fragments (
  T_DTI2_DATA_IND ** dti_data_ind,
  T_LOLA * p_dl,
  UBYTE * ip_header,
  BOOL first_segment,
  /* BOOL middle_segment, */
  BOOL last_segment /*,*/
  /* USHORT fragm_offset */
);

/* Communication handles */

#ifdef OPTION_MULTITHREAD
  #define hCommMMI _ENTITY_PREFIXED (hCommMMI)
  #define hCommDL _ENTITY_PREFIXED (hCommDL)
  #define hCommIP _ENTITY_PREFIXED (hCommIP)
  #define hCommHL _ENTITY_PREFIXED (hCommHL)
#endif

extern T_HANDLE hCommMMI; /* ACI communication */
extern T_HANDLE hCommDL; /* HL communication */
extern T_HANDLE hCommIP; /* IP communication */
extern T_HANDLE hCommHL; /* HL communication */
extern T_HANDLE ip_handle;

/* Entity common buffer for the decoded air interface message */

#ifdef OPTION_MULTITHREAD
  #define _decodedMsg _ENTITY_PREFIXED (_decodedMsg)
#endif

extern UBYTE _decodedMsg [];

#ifndef NCONFIG
  #ifdef OPTION_MULTITHREAD
    #define partab _ENTITY_PREFIXED (partab)
  #endif
  extern KW_DATA partab [];
#endif

#ifdef _SIMULATION_
  #define Sprintf sprintf
#endif

/* Number of signals (maximal signalNum which occurs in pei_signal) */

#define MAX_SIGNALS 10

/*-------------------------------------------------------------------------*/

#endif /* IP_H */

/*-------------------------------------------------------------------------*/