FreeCalypso > hg > fc-magnetite
view src/gpf3/ccd/ccd_globs.h @ 636:57e67ca2e1cb
pcmdata.c: default +CGMI to "FreeCalypso" and +CGMM to model
The present change has no effect whatsoever on Falconia-made and Openmoko-made
devices on which /pcm/CGMI and /pcm/CGMM files have been programmed in FFS
with sensible ID strings by the respective factories, but what should AT+CGMI
and AT+CGMM queries return when the device is a Huawei GTM900 or Tango modem
that has been converted to FreeCalypso with a firmware change? Before the
present change they would return compiled-in defaults of "<manufacturer>" and
"<model>", respectively; with the present change the firmware will self-identify
as "FreeCalypso GTM900-FC" or "FreeCalypso Tango" on the two respective targets.
This firmware identification will become important if someone incorporates an
FC-converted GTM900 or Tango modem into a ZeroPhone-style smartphone where some
high-level software like ofono will be talking to the modem and will need to
properly identify this modem as FreeCalypso, as opposed to some other AT command
modem flavor with different quirks.
In technical terms, the compiled-in default for the AT+CGMI query (which will
always be overridden by the /pcm/CGMI file in FFS if one is present) is now
"FreeCalypso" in all configs on all targets; the compiled-in default for the
AT+CGMM query (likewise always overridden by /pcm/CGMM if present) is
"GTM900-FC" if CONFIG_TARGET_GTM900 or "Tango" if CONFIG_TARGET_TANGO or the
original default of "<model>" otherwise.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 19 Jan 2020 20:14:58 +0000 |
parents | c41a534f33c6 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : ccd_globs.h +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Condat Coder Decoder | Definition of C struct containing ccd internal global variables +----------------------------------------------------------------------------- */ #ifndef __CCD_GLOBS_H #define __CCD_GLOBS_H #include <setjmp.h> #include "ccdtable.h" /* * Constants needed for ccd_globs.h */ #include "ccdapi.h" #if !defined (CCDDATA_DYN) && !defined (CCD_TEST) #include "vsi.h" #endif /* * stack size for the UPN calculator */ #define MAX_UPN_STACK_SIZE 20 #define MAX_KEEP_REG_SIZE 15 /* * the two constants give the size of the iei table */ #define MAX_IE_PER_MSG 40 #define MAX_RECURSIONS_PER_MSG 8 #ifdef CCD_GPRS_ONLY #define CCD_ERR_STK_SZ (MAX_RECURSIONS_PER_MSG+2) #else #define CCD_ERR_STK_SZ 50 #endif /* * constants and types needed for error handling */ #define MAX_ERRORS 10 #define ENCODE_FUN 0 #define DECODE_FUN 1 /* * declare a table for the iei processing. This table * contains for each iei a low and high boundary of * valid repeats and the actual number of repeats */ typedef struct { unsigned valid:4; unsigned multiple:2; unsigned exhausted:2; /* for GSM1_ASN elements */ /* BOOL choice; version does not use GSM1_ASNCHC */ /* UBYTE min_amount; seams to be an unused variable */ UBYTE max_amount; UBYTE act_amount; UBYTE ident; } T_IEI_TABLE; /* * for each msg an initialisation of e.g. the iei_table is to * perform. See cdc_GSM_start(); */ typedef struct { unsigned valid:4; unsigned EOCPending:4; /* for ASN1-BER elements only */ UBYTE countSkipped; /* for GSM1_ASN elements */ USHORT melemStart; USHORT melemLast; USHORT ieTableLen; T_IEI_TABLE iei_table[MAX_IE_PER_MSG]; } T_IEI_CONTEXT; typedef struct { #if defined (CCDDATA_DYN) || defined (CCD_TEST) int me; #else T_HANDLE me; /* entity calling CCD */ #endif SHORT CCD_Error; /* return variable overwritten by ccd_setError */ /* * variable used for processing of nested information elements */ UBYTE ccd_recurs_level; /* * ccd uses setjmp() and longjmp to process some error cases. */ BOOL jmp_mark_set; jmp_buf jmp_mark; #ifdef DYNAMIC_ARRAYS /* * Pointer to head of allocation chain for primitives with pointer types. */ U8 *alloc_head; #endif /* * variables used for bit buffering and manipulation of a message */ UBYTE *bitbuf; UBYTE *pstruct; ULONG pstructOffs; USHORT bitpos; USHORT bytepos; USHORT buflen; USHORT bitoffs; USHORT lastbytepos16; USHORT lastbytepos32; USHORT maxBitpos; UBYTE byteoffs; /* * variables used by the UPN caculator */ UBYTE SP; ULONG Stack[MAX_UPN_STACK_SIZE]; ULONG KeepReg[MAX_KEEP_REG_SIZE]; BOOL StackOvfl; /* * variable used when detecting unknown extensions * of IEs of type CCDTYPE_GSM5_TLV. */ BOOL SeekTLVExt; /* * variables used as cash to keep data on octet boundaries */ USHORT last16Bit; ULONG last32Bit; #ifdef ERR_TRC_STK_CCD U16 error_stack[CCD_ERR_STK_SZ];/*??*/ #endif /* ERR_TRC_STK_CCD */ U8 errLabel; U8 continue_array; U16 msgLen; /* * variables used by the modules in cdc_gsm.c */ T_IEI_CONTEXT iei_ctx[MAX_RECURSIONS_PER_MSG]; USHORT RefBeforeError; USHORT akt1VPos; USHORT next1VPos; BOOL TagPending; UBYTE PendingTag; BOOL SequenceError; BOOL Swap1V_inProgress; UBYTE last_level; UBYTE numEOCPending; #ifdef DEBUG_CCD BOOL TraceIt; char buf[33]; #endif } T_CCD_Globs; #endif