view src/gpf3/ccd/csn1_s1.c @ 636:57e67ca2e1cb

pcmdata.c: default +CGMI to "FreeCalypso" and +CGMM to model The present change has no effect whatsoever on Falconia-made and Openmoko-made devices on which /pcm/CGMI and /pcm/CGMM files have been programmed in FFS with sensible ID strings by the respective factories, but what should AT+CGMI and AT+CGMM queries return when the device is a Huawei GTM900 or Tango modem that has been converted to FreeCalypso with a firmware change? Before the present change they would return compiled-in defaults of "<manufacturer>" and "<model>", respectively; with the present change the firmware will self-identify as "FreeCalypso GTM900-FC" or "FreeCalypso Tango" on the two respective targets. This firmware identification will become important if someone incorporates an FC-converted GTM900 or Tango modem into a ZeroPhone-style smartphone where some high-level software like ofono will be talking to the modem and will need to properly identify this modem as FreeCalypso, as opposed to some other AT command modem flavor with different quirks. In technical terms, the compiled-in default for the AT+CGMI query (which will always be overridden by the /pcm/CGMI file in FFS if one is present) is now "FreeCalypso" in all configs on all targets; the compiled-in default for the AT+CGMM query (likewise always overridden by /pcm/CGMM if present) is "GTM900-FC" if CONFIG_TARGET_GTM900 or "Tango" if CONFIG_TARGET_TANGO or the original default of "<model>" otherwise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 19 Jan 2020 20:14:58 +0000
parents c41a534f33c6
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   : csn1_s1.c
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definition of encoding and decoding functions for CSN1_S1 elements 
+----------------------------------------------------------------------------- 
*/ 


/*
 * standard definitions like GLOBAL, UCHAR, ERROR etc.
 */
#include "typedefs.h"
#include "header.h"

/*
 * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only
 * look at ccdapi.h
 */
#undef USE_DRIVER
#include "ccdapi.h"

/*
 * Types and functions for bit access and manipulation
 */
#include "ccd_globs.h"
#include "bitfun.h"

/*
 * Prototypes of ccd internal functions
 */
#include "ccd.h"

/*
 * Declaration of coder/decoder tables
 */
#include "ccdtable.h"
#include "ccddata.h"

extern SHORT cdc_csn1_sx_decode (int flag, const ULONG e_ref, T_CCD_Globs *globs);
extern SHORT cdc_csn1_sx_encode (int flag, const ULONG e_ref, T_CCD_Globs *globs);

#ifndef RUN_FLASH
/*
+--------------------------------------------------------------------+
| PROJECT : CCD (6144)               MODULE  : CDC_GSM               |
| STATE   : code                     ROUTINE : cdc_csn1_s1_decode    |
+--------------------------------------------------------------------+

  PURPOSE : Decoding of the GSM Type CSN1 S1 element. This element
            consists of a 1 bit valid flag and a value part.
            Only if the valid bit is equal 1 the value part follows.

*/

SHORT cdc_csn1_s1_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_csn1_s1_decode()");
	#else
	TRACE_CCD (globs, "cdc_csn1_s1_decode() %s", ccddata_get_alias((USHORT) e_ref, 1));
	#endif
#endif

  return cdc_csn1_sx_decode (1, e_ref, globs);
}
#endif /* !RUN_FLASH */

#ifndef RUN_FLASH
/*
+--------------------------------------------------------------------+
| PROJECT : CCD (6144)              MODULE  : CDC_GSM                |
| STATE   : code                    ROUTINE : cdc_csn1_s1_encode     |
+--------------------------------------------------------------------+

  PURPOSE : Encoding of the GSM Type CSN1 S1 element. This element
            consists of a 1 bit valid flag and a value part. If the
            element is valid (the v_xxx components is TRUE in the 
            decoded message) a 1 bit will be coded followed by the
            coding of the value part. Otherwise a 0 bit will be 
            coded.

*/

SHORT cdc_csn1_s1_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_csn1_s1_encode()");
	#else
	TRACE_CCD (globs, "cdc_csn1_s1_encode() %s", ccddata_get_alias((USHORT) e_ref, 1));
	#endif
#endif

  return cdc_csn1_sx_encode (1, e_ref, globs);
}
#endif /* !RUN_FLASH */