FreeCalypso > hg > fc-magnetite
view cdg211/cdginc/m_cc.val @ 631:597869e59805
config: introduced new CONFIG_MCSI_MODEM preprocessor symbol
All MCSI functionality was previously conditionalized on CONFIG_TARGET_FCMODEM
(even earlier it was CONFIG_TARGET_FCDEV3B), but having a dedicated
preprocessor symbol for this purpose (defined in targets/*.h as appropriate)
makes it much easier to support different modem targets with MCSI enabled.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:07:02 +0000 |
| parents | 56abf6cf8a0b |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : m_cc.val | | SOURCE : "__out__\g23m_dfile\msg\cc.mdf" | | LastModified : "2003-02-04" | | IdAndVersion : "6147.600.97.108" | | SrcFileTime : "Mon Nov 24 15:50:36 2003" | | Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:14 2007 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef M_CC_VAL #define M_CC_VAL #define CDG_ENTER__M_CC_VAL #define CDG_ENTER__FILENAME _M_CC_VAL #define CDG_ENTER__M_CC_VAL__FILE_TYPE CDGINC #define CDG_ENTER__M_CC_VAL__LAST_MODIFIED _2003_02_04 #define CDG_ENTER__M_CC_VAL__ID_AND_VERSION _6147_600_97_108 #define CDG_ENTER__M_CC_VAL__SRC_FILE_TIME _Mon_Nov_24_15_50_36_2003 #include "CDG_ENTER.h" #undef CDG_ENTER__M_CC_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_access_ident */ #define VAL_ACCESS_IDENT___DEF (0x0) /* reserved */ #define AI_OCT_ID (0x0) /* octet identifier */ /* * Value constants for VAL_state */ #define VAL_STATE___DEF (0x0) /* reserved */ #define CS_0 (0x0) /* null */ #define CS_01 (0x2) /* MM connection pending */ #define CS_03 (0x23) /* Wait for network information */ #define CS_05 (0x25) /* CC-Establishment confirmed */ #define CS_06 (0x26) /* Recall present */ #define CS_1 (0x1) /* call initiated */ #define CS_3 (0x3) /* mobile originating call proceeding */ #define CS_4 (0x4) /* call delivered */ #define CS_6 (0x6) /* call present */ #define CS_7 (0x7) /* call received */ #define CS_8 (0x8) /* connect request */ #define CS_9 (0x9) /* mobile terminating call confirmed */ #define CS_10 (0xa) /* active */ #define CS_11 (0xb) /* disconnect request */ #define CS_12 (0xc) /* disconnect indication */ #define CS_19 (0x13) /* release request */ #define CS_26 (0x1a) /* mobile originating modify */ #define CS_27 (0x1b) /* mobile terminating modify */ #define CS_28 (0x1c) /* connect indication */ /* * Value constants for VAL_cause */ #define CAUSE_UNASSIGN (0x1) /* Unassigned (unallocated) Note 9 number */ #define CAUSE_NO_ROUTE (0x3) /* No route to destination */ #define CAUSE_CHAN_UNACCEPT (0x6) /* Channel unacceptable */ #define CAUSE_BARRED (0x8) /* Operator determined barring */ #define CAUSE_CALL_CLEAR (0x10) /* Normal call clearing */ #define CAUSE_USER_BUSY (0x11) /* User busy */ #define CAUSE_NO_RESPONSE (0x12) /* No user responding */ #define CAUSE_ALERT_NO_ANSWER (0x13) /* User alerting, no answer */ #define CAUSE_CALL_REJECT (0x15) /* Call rejected */ #define CAUSE_NUM_CHANGED (0x16) /* Number changed */ #define CAUSE_PREEMPTION (0x19) /* Pre-emption */ #define CAUSE_USER_CLEAR (0x1a) /* Non selected user clearing */ #define CAUSE_DEST_ORDER (0x1b) /* Destination out of order */ #define CAUSE_NUM_FORMAT (0x1c) /* Invalid number format (incomplete number) */ #define CAUSE_FACILITY_REJECT (0x1d) /* Facility rejected */ #define CAUSE_STATUS_ENQUIRY (0x1e) /* Response to STATUS ENQUIRY */ #define CAUSE_UNSPECIFIED (0x1f) /* Normal, unspecified */ #define CAUSE_NO_CHAN_AVAIL (0x22) /* No circuit/channel available */ #define CAUSE_NETWORK_ORDER (0x26) /* Network out of order */ #define CAUSE_TEMP_FAIL (0x29) /* Temporary failure */ #define CAUSE_SWITCH_CONGEST (0x2a) /* Switching equipment congestion */ #define CAUSE_INFO_DISCARD (0x2b) /* Access information discarded */ #define CAUSE_REQ_CHAN_UNAVAIL (0x2c) /* requested circuit/channel not available */ #define CAUSE_RESOURCE_UNAVAIL (0x2f) /* Resources unavailable, unspecified */ #define CAUSE_QOS_UNAVAIL (0x31) /* Quality of service unavailable */ #define CAUSE_FACILITY_UNSUBSCRIB (0x32) /* Requested facility not subscribed */ #define CAUSE_BARRED_IN_CUG (0x37) /* Incoming calls barred within the CUG */ #define CAUSE_BEARER_CAP_AUTHORIZ (0x39) /* Bearer capability not authorized */ #define CAUSE_BEARER_CAP_UNAVAIL (0x3a) /* Bearer capability not presently available */ #define CAUSE_SERVICE_UNAVAIL (0x3f) /* Service or option not available, unspecified */ #define CAUSE_BEARER_NOT_IMPLEM (0x41) /* Bearer service not implemented */ #define CAUSE_ACM_MAX (0x44) /* ACM equal to or greater than ACMmax */ #define CAUSE_FACILITY_NOT_IMPLEM (0x45) /* Requested facility not implemented */ #define CAUSE_RESTICT_BEARER_CAP (0x46) /* Only restricted digital information bearer capability is available */ #define CAUSE_SERVICE_NOT_IMPLEM (0x4f) /* Service or option not implemented, unspecified */ #define CAUSE_INVALID_TI (0x51) /* Invalid transaction identifier value */ #define CAUSE_USER_NOT_IN_CUG (0x57) /* User not member of CUG */ #define CAUSE_INCOMPAT_DEST (0x58) /* Incompatible destination */ #define CAUSE_INVALID_TRANS_NET (0x5b) /* Invalid transit network selection */ #define CAUSE_INCORRECT_MESSAGE (0x5f) /* Semantically incorrect message */ #define CAUSE_INVALID_MAND_INFO (0x60) /* Invalid mandatory information */ #define CAUSE_MESSAGE_TYPE_NOT_IMPLEM (0x61) /* Message type non-existent or not implemented */ #define CAUSE_MESSAGE_TYPE_INCOMPAT (0x62) /* Message type not compatible with protocol state */ #define CAUSE_INFO_ELEM_NOT_IMPLEM (0x63) /* Information element nonistent or not implemented */ #define CAUSE_COND_INFO_ELEM (0x64) /* Conditional IE error */ #define CAUSE_MESSAGE_INCOMPAT (0x65) /* Message not compatible with protocol state */ #define CAUSE_TIMER (0x66) /* Recovery on timer expiry */ #define CAUSE_PROTOCOL (0x6f) /* Protocol error, unspecified */ #define CAUSE_INTERWORKING (0x7f) /* Interworking, unspecified */ /* * Value constants for VAL_code */ #define VAL_CODE___DEF (0x0) /* reserved */ #define CSTD_GSM (0x0) /* GSM standardized coding */ /* * Value constants for VAL_cs */ #define CS_Q931 (0x0) /* standardized coding as described in CCITT Rec. Q.931 */ #define CS_INTERNATIONAL (0x1) /* reserved for other international standards */ #define CS_NATIONAL (0x2) /* national standard */ #define CS_GSM_PLMN (0x3) /* standard defined for the GSM PLMNS as described in 10.86/GSM 04.08 */ /* * Value constants for VAL_compress */ #define COMP_NO (0x0) /* data compression not possible */ #define COMP_YES (0x1) /* data compression possible */ /* * Value constants for VAL_config */ #define VAL_CONFIG___DEF (0x0) /* reserved */ #define CONF_POINT_TO_POINT (0x0) /* point-to-point */ /* * Value constants for VAL_congest_lev */ #define VAL_CONGEST_LEV___DEF (0x0) /* reserved */ #define CL_RECEIVER_READY (0x0) /* receiver ready */ #define CL_RECEIVER_NOT_READY (0xf) /* receiver not ready */ /* * Value constants for VAL_conn_elem */ #define CE_TRANSPA (0x0) /* transparent */ #define CE_RLP (0x1) /* non transparent (RLP) */ #define CE_TRANSPA_PREF (0x2) /* both, transparent preferred */ #define CE_RLP_PREF (0x3) /* both, non transparent preferred */ /* * Value constants for VAL_dtmf */ #define DTMF_EARLY (0x0) /* Reserved for earlier versions of the protocol. */ #define DTMF_CURRENT (0x1) /* The mobile station supports DTMF as specified in section 5.5.7 of GSM 4.08. */ /* * Value constants for VAL_duplex */ #define DUPLEX_HALF (0x0) /* half duplex */ #define DUPLEX_FULL (0x1) /* full duplex */ /* * Value constants for VAL_establish */ #define VAL_ESTABLISH___DEF (0x0) /* reserved */ #define ESTAB_DEMAND (0x0) /* demand */ /* * Value constants for VAL_hold */ #define HLD_IDLE (0x0) #define HLD_HOLD_REQ (0x1) #define HLD_CALL_HELD (0x2) #define HLD_RETRIEVE_REQ (0x3) /* * Value constants for VAL_trans_cap */ #define VAL_TRANS_CAP___DEF (0x0) /* reserved */ #define ITC_SPEECH (0x0) /* speech */ #define ITC_DIGITAL_UNRESTRICTED (0x1) /* unrestricted digital information */ #define ITC_AUDIO (0x2) /* audio 3.1 kHz, ex PLMN */ #define ITC_FAX_GROUP_3 (0x3) /* fascimile group 3 */ #define ITC_AUXILIARY_SPEECH (0x6) /* Auxiliary speech */ #define ITC_NETWORK_RESERVED (0x7) /* reserved, to be used in the network. */ /* * Value constants for VAL_intermed_rate */ #define VAL_INTERMED_RATE___DEF (0x0) /* reserved */ #define IR_8_KBIT (0x2) /* 8 kbit/s */ #define IR_16_KBIT (0x3) /* 16 kbit/s */ /* * Value constants for VAL_l1_ident */ #define VAL_L1_IDENT___DEF (0x0) /* reserved */ #define L1_OCT_ID (0x1) /* octet identifier */ /* * Value constants for VAL_l2_ident */ #define VAL_L2_IDENT___DEF (0x0) /* reserved */ #define L2_OCT_ID (0x2) /* octet identifier */ /* * Value constants for VAL_loc */ #define VAL_LOC___DEF (0x0) /* reserved */ #define LOC_USER (0x0) /* user */ #define LOC_PRIV_NET_LOCAL_USER (0x1) /* private network serving the local user */ #define LOC_PUB_NET_LOCAL_USER (0x2) /* public network serving the local user */ #define LOC_TRANSIT_NET (0x3) /* transit network */ #define LOC_PUB_NET_REMOTE_USER (0x4) /* public network serving the remote user */ #define LOC_PRIV_NET_REMOTE_USER (0x5) /* private network serving the remote user */ #define LOC_INTERNATIONAL_NET (0x7) /* international network */ #define LOC_BEYOND_POINT (0xa) /* network beyond interworking point */ /* * Value constants for VAL_modem_type */ #define VAL_MODEM_TYPE___DEF (0x0) /* reserved */ #define MT_NONE (0x0) /* none */ #define MT_V21 (0x1) /* V.21 */ #define MT_V22 (0x2) /* V.22 */ #define MT_V22BIS (0x3) /* V.22 bis */ #define MT_V23 (0x4) /* V.23 */ #define MT_V26TER (0x5) /* V.26 ter */ #define MT_V32 (0x6) /* V.32 */ #define MT_UNDEF (0x7) /* modem for undefined interface */ #define MT_AUTO (0x8) /* autobauding type 1 */ /* * Value constants for VAL_mpty */ #define MPTY_IDLE (0x0) #define MPTY_REQ (0x1) #define MPTY_CALL (0x2) #define MPTY_SPLIT (0x3) /* * Value constants for VAL_negotiate */ #define VAL_NEGOTIATE___DEF (0x0) /* reserved */ #define NEGOTIATE_NO (0x0) /* in-band negotiation not possible */ /* * Value constants for VAL_nirr */ #define NIRR_NO_MEANING (0x0) /* No meaning is associated with this value. */ #define NIRR_DATA (0x1) /* Data up to and including 4.8 kb/s, full rate, non-transparent, 6 kb/s radio interface rate is requested. */ /* * Value constants for VAL_nic_rx */ #define NIC_RX_NO (0x0) /* cannot accept data with network independent clock (i.e. sender does not support this optional procedure) */ #define NIC_RX_YES (0x1) /* can accept data with network independent clock (i.e. sender does support this optional procedure) */ /* * Value constants for VAL_nic_tx */ #define NIC_TX_NO (0x0) /* does not require to send data with network independent clock */ #define NIC_TX_YES (0x1) /* requires to send data with network independent clock */ /* * Value constants for VAL_nd */ #define VAL_ND___DEF (0x0) /* reserved */ #define ND_USER_SUSPEND (0x0) #define ND_USED_RESUME (0x1) #define ND_BEARER_CHANGE (0x2) /* * Value constants for VAL_npi */ #define VAL_NPI___DEF (0x0) /* reserved */ #define NPI_UNKNOWN (0x0) /* unknown */ #define NPI_ISDN (0x1) /* ISDN/telephony numbering plan (Rec. E.164/E.163) */ #define NPI_X121 (0x3) /* data numbering plan (Recommendation X.121) */ #define NPI_F69 (0x4) /* telex numbering plan (Recommendation F.69) */ #define NPI_NATIONAL (0x8) /* national numbering plan */ #define NPI_PRIVATE (0x9) /* private numbering plan */ #define NPI_EXTENSTION (0xf) /* reserved for extension */ /* * Value constants for VAL_num_data */ #define NDATA_7 (0x0) /* 7 bits */ #define NDATA_8 (0x1) /* 8 bits (this value is also used in the case of bit oriented protocols) */ /* * Value constants for VAL_num_stop */ #define NSTOP_1 (0x0) /* 1 bit (This value is also used in the case of synchronous mode) */ #define NSTOP_2 (0x1) /* 2 bits */ /* * Value constants for VAL_odd_even */ #define OE_EVEN (0x0) /* even number of address signals */ #define OE_ODD (0x1) /* odd number of address signals */ /* * Value constants for VAL_parity */ #define VAL_PARITY___DEF (0x0) /* reserved */ #define PARITY_ODD (0x0) /* odd */ #define PARITY_EVEN (0x2) /* even */ #define PARITY_NONE (0x3) /* none */ #define PARITY_0 (0x4) /* forced to 0 */ #define PARITY_1 (0x5) /* forced to 1 */ /* * Value constants for VAL_present */ #define VAL_PRESENT___DEF (0x0) /* reserved */ #define PRES_ALLOWED (0x0) /* Presentation allowed */ #define PRES_RESTRICTED (0x1) /* Presentation restricted */ #define PRES_NOT_AVAIL (0x2) /* Number not available due to interworking */ /* * Value constants for VAL_progress_desc */ #define VAL_PROGRESS_DESC___DEF (0x0) /* Unspecific */ #define PROG_NO_END_TO_END_PLMN (0x1) /* Call is not end-to-end PLMN/ISDN, further call progress information may be available in-band */ #define PROG_DEST_NON_PLMN (0x2) /* Destination address in non-PLMN/ISDN */ #define PROG_ORIGIN_NON_PLMN (0x3) /* Origination address in non-PLMN/ISDN */ #define PROG_RETURN_TO_PLMN (0x4) /* Call has returned to the PLMN/ISDN */ #define PROG_INBAND_AVAIL (0x8) /* In-band information or appropriate pattern now available */ #define PROG_END_TO_END_PLMN (0x20) /* Call is end-to-end PLMN/ISDN */ #define PROG_QUEUEING (0x40) /* Queueing */ /* * Value constants for VAL_rad_chan_req */ #define VAL_RAD_CHAN_REQ___DEF (0x0) /* reserved */ #define RCR_FULL_ONLY (0x1) /* full rate support only mobile station */ #define RCR_HALF_PREF (0x2) /* dual rate support mobile station/half rate preferred */ #define RCR_FULL_PREF (0x3) /* dual rate support mobile station/full rate preferred */ /* * Value constants for VAL_rate_adapt */ #define VAL_RATE_ADAPT___DEF (0x0) /* reserved */ #define RA_NONE (0x0) /* no rate adaption */ #define RA_V110 (0x1) /* V.110/X.30 rate adaption */ #define RA_X31 (0x2) /* CCITT X.31 flag stuffing */ /* * Value constants for VAL_repeat */ #define REPEAT_CIRCULAR (0x1) /* Circular for successive selection 'mode 1 alternate mode 2' */ #define REPEAT_SEQUENTIAL (0x3) /* Sequential for successive selection 'mode 1 and then mode 2' */ /* * Value constants for VAL_screen */ #define SCR_USER_UNSCREENED (0x0) /* User-provided, not screened */ #define SCR_USER_PASSED (0x1) /* User-provided, verified and passed */ #define SCR_USER_FAILED (0x2) /* User-provided, verified and failed */ #define SCR_NETWORD (0x3) /* Network provided */ /* * Value constants for VAL_signal */ #define VAL_SIGNAL___DEF (0x0) /* reserved */ #define SIGNAL_DIAL_ON (0x0) /* dial tone on */ #define SIGNAL_BACK_ON (0x1) /* ring back tone on */ #define SIGNAL_INTERCEPT_ON (0x2) /* intercept tone on */ #define SIGNAL_CONGEST_ON (0x3) /* network congestion tone on */ #define SIGNAL_BUSY_ON (0x4) /* busy tone on */ #define SIGNAL_CONFIRM_ON (0x5) /* confirm tone on */ #define SIGNAL_ANSWER_ON (0x6) /* answer tone on */ #define SIGNAL_WAITING_ON (0x7) /* call waiting tone on */ #define SIGNAL_HOOK_OFF_ON (0x8) /* off-hook warning tone on */ #define SIGNAL_TONES_OFF (0x3f) /* tones off */ #define SIGNAL_ALERT_OFF (0x4f) /* alerting off */ /* * Value constants for VAL_sig_access_prot */ #define VAL_SIG_ACCESS_PROT___DEF (0x0) /* reserved */ #define SIAP_I440 (0x1) /* I.440/450 */ #define SIAP_X21 (0x2) /* X.21 */ #define SIAP_X28_INDIV_NUI (0x3) /* X.28 - dedicated PAD, individual NUI */ #define SIAP_X28_UNIV_NUI (0x4) /* X.28 - dedicated PAD, universal NUI */ #define SIAP_X28_NON_DEDIC (0x5) /* X.28 - non dedicated PAD */ #define SIAP_X32 (0x6) /* X.32 */ /* * Value constants for VAL_structure */ #define VAL_STRUCTURE___DEF (0x0) /* reserved */ #define STRC_SERV_DATA_INTEG (0x0) /* service data unit integrity */ #define STRC_UNSTRUCTURED (0x3) /* unstructured */ /* * Value constants for VAL_sync_async */ #define SYNCHRONOUS (0x0) /* synchronous */ #define ASYNCHRONOUS (0x1) /* asynchronous */ /* * Value constants for VAL_trans_mode */ #define TM_CIRCUIT (0x0) /* circuit mode */ #define TM_PACKET (0x1) /* packet mode */ /* * Value constants for VAL_ton */ #define VAL_TON___DEF (0x0) /* reserved */ #define TON_UNKNOWN (0x0) /* unknown */ #define TON_INTERNATIONAL (0x1) /* international number */ #define TON_NATIONAL (0x2) /* national number */ #define TON_NETWORK (0x3) /* network specific number */ #define TON_DEDICATED (0x4) /* dedicated access, short code */ #define TON_EXTENSION (0x7) /* reserved for extention */ /* * Value constants for VAL_tos */ #define VAL_TOS___DEF (0x0) /* reserved */ #define TOS_NSAP (0x0) /* NSAP (X.213/ISO 8348 AD2) */ #define TOS_USER (0x2) /* User specified */ /* * Value constants for VAL_user_inf_l1_prot */ #define VAL_USER_INF_L1_PROT___DEF (0x0) /* reserved */ #define L1_DEFAULT (0x0) /* default layer 1 protocol */ /* * Value constants for VAL_user_inf_l2_prot */ #define VAL_USER_INF_L2_PROT___DEF (0x0) /* reserved */ #define L2_X25 (0x6) /* recommendation X.25, link level */ #define L2_ISO6429 (0x8) /* ISO 6429, codeset 0 (DC1/DC3) */ #define L2_X75 (0x9) /* X.75 layer 2 modified (teletex) */ #define L2_VIDEOTEX (0xa) /* videotex profile 1 */ #define L2_COPFC (0xc) /* COPnoFlCt (Character oriented Protocol with no Flow Control mechanism) */ /* * Value constants for VAL_user_rate */ #define VAL_USER_RATE___DEF (0x0) /* reserved */ #define UR_0_3_KBIT (0x1) /* rate : 0.3 kbit/s Recommendation X.1 and V.110 */ #define UR_1_2_KBIT (0x2) /* rate : 1.2 kbit/s Recommendation X.1 and V.110 */ #define UR_2_4_KBIT (0x3) /* rate : 2.4 kbit/s Recommendation X.1 and V.110 */ #define UR_4_8_KBIT (0x4) /* rate : 4.8 kbit/s Recommendation X.1 and V.110 */ #define UR_9_6_KBIT (0x5) /* rate : 9.6 kbit/s Recommendation X.1 and V.110 */ #define UR_12_0_KBIT_TRANS (0x6) /* rate : 12.0 kbit/s transparent */ #define UR_1_2_KBIT_V23 (0x7) /* rate : 1.2 kbit/s/75 bit/s Recommendation V.23, X.1,V.110. */ /* * Value constants for VAL_pd */ #define VAL_PD___DEF (0x0) /* reserved */ #define PD_USER (0x0) /* User specific protocol */ #define PD_HIGH_LAYER (0x1) /* OSI high layer protocols */ #define PD_X244 (0x2) /* X.244 */ #define PD_SYS_MANAGE (0x3) /* Reserved for system management convergence function */ #define PD_IA5 (0x4) /* IA5 characters */ #define PD_V120 (0x7) /* Rec.V.120 rate adaption */ #define PD_Q931 (0x8) /* Q.931 (I.451) user-network call control messages */ /* * Value constants for VAL_speech_vers1 */ #define SPEECH_VERS_FR (0x0) /* full rate speech version 1 */ #define SPEECH_VERS_HR (0x1) /* half rate speech version 1 */ #define SPEECH_VERS_EFR (0x2) /* full rate speech version 2 (enhanced full rate) */ #define SPEECH_VERS_AMR_HR (0x5) /* half rate speech version 3 (AHS) */ #define SPEECH_VERS_AMR_FR (0x4) /* full rate speech version 3 (AFS) */ #define SPEECH_VERS_NONE (0xf) /* no speech version given */ /* * Value constants for VAL_modem_type_2 */ #define OTHER_MODEM_TYPE_NONE (0x0) /* No other modem type specified */ #define OTHER_MODEM_TYPE_V32BIS (0x1) /* V.32bis */ #define OTHER_MODEM_TYPE_V34 (0x2) /* V.34 */ /* * Value constants for VAL_fnur */ #define FNUR_NOT_APPLICABLE (0x0) /* Fixed network user rate not applicable */ #define FNUR_9600 (0x1) /* FNUR 9.6 kbit/s */ #define FNUR_14400 (0x2) /* FNUR 14.4 kbit/s */ #define FNUR_19200 (0x3) /* FNUR 19.2 kbit/s */ #define FNUR_28800 (0x4) /* FNUR 28.8 kbit/s */ #define FNUR_38400 (0x5) /* FNUR 38.4 kbit/s */ #define FNUR_48000 (0x6) /* FNUR 48.0 kbit/s */ #define FNUR_56000 (0x7) /* FNUR 56.0 kbit/s */ #define FNUR_64000 (0x8) /* FNUR 64.0 kbit/s */ /* * Value constants for VAL_acc */ #define ACC_EMPTY (0x0) /* No channel codings acceptable */ #define ACC_48 (0x1) /* TCH 4.8 acceptable */ #define ACC_96 (0x2) /* TCH 9.6 acceptable */ #define ACC_48_96 (0x3) /* TCH 4.8/9.6 acceptable */ #define ACC_144 (0x8) /* TCH 14.4 acceptable */ #define ACC_48_144 (0x9) /* TCH 4.8/14.4 acceptable */ #define ACC_96_144 (0xa) /* TCH 9.6/14.4 acceptable */ #define ACC_ALL (0xb) /* All channel codings acceptable */ /* * Value constants for VAL_mTch */ #define MAX_TCH_1 (0x0) /* Maximum of 1 TCH */ #define MAX_TCH_2 (0x1) /* Maximum of 2 TCH */ #define MAX_TCH_3 (0x2) /* Maximum of 3 TCH */ #define MAX_TCH_4 (0x3) /* Maximum of 4 TCH */ #define MAX_TCH_5 (0x4) /* Maximum of 5 TCH */ #define MAX_TCH_6 (0x5) /* Maximum of 6 TCH */ #define MAX_TCH_7 (0x6) /* Maximum of 7 TCH */ #define MAX_TCH_8 (0x7) /* Maximum of 8 TCH */ /* * Value constants for VAL_uimi */ #define UIMI_NOT_ALLOWED (0x0) /* User initiated modification not allowed/required */ #define UIMI_MAX_1_TCH (0x1) /* User initiated modification up to 1 TCH/F */ #define UIMI_MAX_2_TCH (0x2) /* User initiated modification up to 2 TCH/F */ #define UIMI_MAX_3_TCH (0x3) /* User initiated modification up to 3 TCH/F */ #define UIMI_MAX_4_TCH (0x4) /* User initiated modification up to 4 TCH/F */ /* * Value constants for VAL_waiur */ #define WAIUR_NOT_APPLICABLE (0x0) /* Wanted Air Interface user rate not applicable */ #define WAIUR_9600 (0x1) /* WAIUR 9.6 kbit/s */ #define WAIUR_14400 (0x2) /* WAIUR 14.4 kbit/s */ #define WAIUR_19200 (0x3) /* WAIUR 19.2 kbit/s */ #define WAIUR_28800 (0x5) /* WAIUR 28.8 kbit/s */ #define WAIUR_38400 (0x6) /* WAIUR 38.4 kbit/s */ #define WAIUR_43200 (0x7) /* WAIUR 43.2 kbit/s */ #define WAIUR_57600 (0x8) /* WAIUR 57.6 kbit/s */ /* * Value constants for VAL_ccbs_act */ #define CCBS_NO (0x0) /* CCBS is not possible */ #define CCBS_YES (0x1) /* CCBS is possible */ /* * Value constants for VAL_pcp */ #define PCP_NO (0x0) /* Mobile does not support prolonged clearing procedure */ #define PCP_YES (0x1) /* Mobile supports prolonged clearing procedure */ /* * Value constants for VAL_rcl_type */ #define CCBS (0x0) /* CCBS */ #define CCBS_1 (0x1) /* Shall be treated as CCBS (intended for other similar types of Recall) */ #define CCBS_2 (0x2) /* Shall be treated as CCBS (intended for other similar types of Recall) */ #define CCBS_3 (0x3) /* Shall be treated as CCBS (intended for other similar types of Recall) */ #define CCBS_4 (0x4) /* Shall be treated as CCBS (intended for other similar types of Recall) */ #define CCBS_5 (0x5) /* Shall be treated as CCBS (intended for other similar types of Recall) */ #define CCBS_6 (0x6) /* Shall be treated as CCBS (intended for other similar types of Recall) */ /* * Value constants for VAL_coding_bc3x1 */ #define CODING_BC3X_SPEECH (0x0) /* Octet 3x of IE Bearer Capabilities indicates speech codec version */ #define CODING_BC3X_OTHER (0x1) /* Octet 3x of IE Bearer Capabilities used for other extension of octet 3 */ /* * Value constants for VAL_ctm */ #define CTM_NO (0x0) /* Mobile does not support prolonged clearing procedure */ #define CTM_YES (0x1) /* Mobile supports prolonged clearing procedure */ /* * user defined constants */ #define L3MAX (0xfb) #define MAX_SS_VERSION (0x1) #include "CDG_LEAVE.h" #endif