FreeCalypso > hg > fc-magnetite
view cdg211/cdginc/p_mncc.val @ 631:597869e59805
config: introduced new CONFIG_MCSI_MODEM preprocessor symbol
All MCSI functionality was previously conditionalized on CONFIG_TARGET_FCMODEM
(even earlier it was CONFIG_TARGET_FCDEV3B), but having a dedicated
preprocessor symbol for this purpose (defined in targets/*.h as appropriate)
makes it much easier to support different modem targets with MCSI enabled.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:07:02 +0000 |
| parents | 56abf6cf8a0b |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_mncc.val | | SOURCE : "__out__\g23m_dfile\prim\mncc.pdf" | | LastModified : "2003-07-03" | | IdAndVersion : "6147.101.96.116" | | SrcFileTime : "Tue Jan 31 13:13:54 2006" | | Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:15 2007 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_MNCC_VAL #define P_MNCC_VAL #define CDG_ENTER__P_MNCC_VAL #define CDG_ENTER__FILENAME _P_MNCC_VAL #define CDG_ENTER__P_MNCC_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_MNCC_VAL__LAST_MODIFIED _2003_07_03 #define CDG_ENTER__P_MNCC_VAL__ID_AND_VERSION _6147_101_96_116 #define CDG_ENTER__P_MNCC_VAL__SRC_FILE_TIME _Tue_Jan_31_13_13_54_2006 #include "CDG_ENTER.h" #undef CDG_ENTER__P_MNCC_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_ti */ #define TI_RES_1 (0x7) /* reserved */ #define TI_RES_2 (0xf) /* reserved */ /* * Value constants for VAL_progress_desc */ #define PROG_NO_END_TO_END_PLMN (0x1) /* call is not end-to-end PLMN/ISDN, further call progress information may be available in-band */ #define PROG_DEST_NON_PLMN (0x2) /* destination address in non-PLMN/ISDN */ #define PROG_ORIGIN_NON_PLMN (0x3) /* origination address in non-PLMN/ISDN */ #define PROG_RETURN_TO_PLMN (0x4) /* call has returned to the PLMN/ISDN */ #define PROG_INBAND_AVAIL (0x8) /* in-band information or appropriate pattern now available */ #define PROG_END_TO_END_PLMN (0x20) /* call is end-to-end PLMN/ISDN */ #define PROG_QUEUEING (0x40) /* queueing */ #define PROG_UNSPECIFIC (0xfe) /* unspecific, used when coding standard is not equal to GSM; note that the value chosen here must not collide with any defined value of the progress description IE of the air interface */ #define PROG_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_fac_context */ #define FAC_IN_ALERT (0x0) /* Facility information in ALERT message */ #define FAC_IN_CALL_PROCEED (0x1) /* Facility information in CALL PROCEEDING message */ #define FAC_IN_DISCONNECT (0x2) /* Facility information in DISCONNECT message */ #define FAC_IN_RELEASE (0x3) /* Facility information in RELEASE message */ #define FAC_IN_CONNECT (0x4) /* Facility information in CONNECT message */ #define FAC_IN_SETUP (0x5) /* Facility information in SETUP message */ #define FAC_IN_FACILITY (0x6) /* Facility information in USER INFORMATION message */ #define FAC_IN_RELEASE_COMP (0x7) /* Facility information in RELEASE COMPLETE message */ #define FAC_IN_RECALL (0x8) /* Facility information in RECALL message */ /* * Value constants for VAL_info_context */ #define USER_IN_ALERT (0x0) /* User information in ALERT message */ #define USER_IN_DISCONNECT (0x1) /* User information in DISCONNECT message */ #define USER_IN_PROGRESS (0x2) /* User information in PROGRESS message */ #define USER_IN_RELEASE (0x3) /* User information in RELEASE message */ #define USER_IN_CONNECT (0x4) /* User information in CONNECT message */ #define USER_IN_SETUP (0x5) /* User information in SETUP message */ #define USER_IN_USER (0x6) /* User information in USER INFORMATION message */ /* * Value constants for VAL_pd */ #define PD_USER (0x0) /* user specific protocol */ #define PD_HIGH_LAYER (0x1) /* OSI high layer protocols */ #define PD_X244 (0x2) /* X.244 */ #define PD_SYS_MANAGE (0x3) /* reserved for system management convergence function */ #define PD_IA5 (0x4) /* IA5 characters */ #define PD_V120 (0x7) /* Rec.V.120 rate adaption */ #define PD_Q931 (0x8) /* Q.931 (I.451) user-network call control messages */ /* * Value constants for VAL_serv */ #define SERV_SPEECH (0x0) /* speech */ #define SERV_DATA (0x1) /* data */ #define SERV_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_cause */ #define MNCC_CAUSE_UNASSIGN (0x501) /* unassigned (unallocated) number */ #define MNCC_CAUSE_NO_ROUTE (0x503) /* no route to destination */ #define MNCC_CAUSE_CHAN_UNACCEPT (0x506) /* channel unacceptable */ #define MNCC_CAUSE_BARRED (0x508) /* operator determined barring */ #define MNCC_CAUSE_CALL_CLEAR (0x510) /* normal call clearing */ #define MNCC_CAUSE_USER_BUSY (0x511) /* user busy */ #define MNCC_CAUSE_NO_RESPONSE (0x512) /* no user responding */ #define MNCC_CAUSE_ALERT_NO_ANSWER (0x513) /* user alerting, no answer */ #define MNCC_CAUSE_CALL_REJECT (0x515) /* call rejected */ #define MNCC_CAUSE_NUM_CHANGED (0x516) /* number changed */ #define MNCC_CAUSE_PREEMPTION (0x519) /* pre-emption */ #define MNCC_CAUSE_USER_CLEAR (0x51a) /* non selected user clearing */ #define MNCC_CAUSE_DEST_ORDER (0x51b) /* destination out of order */ #define MNCC_CAUSE_NUM_FORMAT (0x51c) /* invalid number format (incomplete number) */ #define MNCC_CAUSE_FACILITY_REJECT (0x51d) /* facility rejected */ #define MNCC_CAUSE_STATUS_ENQUIRY (0x51e) /* response to status enquiry */ #define MNCC_CAUSE_UNSPECIFIED (0x51f) /* normal, unspecified */ #define MNCC_CAUSE_NO_CHAN_AVAIL (0x522) /* no circuit / channel available */ #define MNCC_CAUSE_NETWORK_ORDER (0x526) /* network out of order */ #define MNCC_CAUSE_TEMP_FAIL (0x529) /* temporary failure */ #define MNCC_CAUSE_SWITCH_CONGEST (0x52a) /* switching equipment congestion */ #define MNCC_CAUSE_INFO_DISCARD (0x52b) /* access information discarded */ #define MNCC_CAUSE_REQ_CHAN_UNAVAIL (0x52c) /* requested circuit / channel not available */ #define MNCC_CAUSE_RESOURCE_UNAVAIL (0x52f) /* resources unavailable, unspecified */ #define MNCC_CAUSE_QOS_UNAVAIL (0x531) /* quality of service unavailable */ #define MNCC_CAUSE_FACILITY_UNSUBSCRIB (0x532) /* requested facility not subscribed */ #define MNCC_CAUSE_BARRED_IN_CUG (0x537) /* incoming calls barred within the CUG */ #define MNCC_CAUSE_BEARER_CAP_AUTHORIZ (0x539) /* bearer capability not authorized */ #define MNCC_CAUSE_BEARER_CAP_UNAVAIL (0x53a) /* bearer capability not presently available */ #define MNCC_CAUSE_SERVICE_UNAVAIL (0x53f) /* service or option not available, unspecified */ #define MNCC_CAUSE_BEARER_NOT_IMPLEM (0x541) /* bearer service not implemented */ #define MNCC_CAUSE_ACM_MAX (0x544) /* ACM equal or greater than ACMmax */ #define MNCC_CAUSE_FACILITY_NOT_IMPLEM (0x545) /* requested facility not implemented */ #define MNCC_CAUSE_RESTICT_BEARER_CAP (0x546) /* only restricted digital information bearer capability is available */ #define MNCC_CAUSE_SERVICE_NOT_IMPLEM (0x54f) /* service or option not implemented, unspecified */ #define MNCC_CAUSE_INVALID_TI (0x551) /* invalid transaction identifier value */ #define MNCC_CAUSE_USER_NOT_IN_CUG (0x557) /* user not member of CUG */ #define MNCC_CAUSE_INCOMPAT_DEST (0x558) /* incompatible destination (originated by net) */ #define MNCC_CAUSE_INVALID_TRANS_NET (0x55b) /* invalid transit network selection */ #define MNCC_CAUSE_INCORRECT_MESSAGE (0x55f) /* semantically incorrect message */ #define MNCC_CAUSE_INVALID_MAND_INFO (0x560) /* invalid mandatory information */ #define MNCC_CAUSE_MESSAGE_TYPE_NOT_IMPLEM (0x561)/* message type non-existent or not implemented */ #define MNCC_CAUSE_MESSAGE_TYPE_INCOMPAT (0x562) /* message type not compatible with protocol state */ #define MNCC_CAUSE_INFO_ELEM_NOT_IMPLEM (0x563) /* information element non-existent or not implemented */ #define MNCC_CAUSE_COND_INFO_ELEM (0x564) /* conditional information element error */ #define MNCC_CAUSE_MESSAGE_INCOMPAT (0x565) /* message not compatible with protocol state */ #define MNCC_CAUSE_TIMER (0x566) /* recovery on timer expiry */ #define MNCC_CAUSE_PROTOCOL (0x56f) /* protocol error, unspecified */ #define MNCC_CAUSE_INTERWORKING (0x57f) /* interworking, unspecified */ #define MNCC_CAUSE_MS_FACILITY_REJECT (0x451d) /* facility rejected (originated by MS) */ #define MNCC_CAUSE_MS_BEARER_NOT_IMPLEM (0x4541) /* bearer service not implemented (originated by MS) */ #define MNCC_CAUSE_MS_INVALID_TI (0x4551) /* invalid transaction identifier value (originated by MS) */ #define MNCC_CAUSE_MS_INCOMPAT_DEST (0x4558) /* incompatible destination (originated by MS) */ #define MNCC_CAUSE_MS_INVALID_MAND_INFO (0x4560) /* invalid mandatory information (originated by MS) */ #define MNCC_CAUSE_MS_COND_INFO_ELEM (0x4564) /* conditional information element error (originated by MS) */ #define MNCC_CAUSE_MS_MESSAGE_INCOMPAT (0x4565) /* message not compatible with protocol state (originated by MS) */ #define MNCC_CAUSE_MS_TIMER (0x4566) /* recovery on timer expiry (originated by MS) */ #define MNCC_CAUSE_MODIFY_SUCCESS (0x8500) /* in-call modification successfully performed, MODIFY COMPLETE message received */ #define MNCC_CAUSE_HOLD_SUCCESS (0x8502) /* hold successfully performed, HOLD ACKNOWLEDGE message received */ #define MNCC_CAUSE_RETRIEVE_SUCCESS (0x8503) /* retrieve successfully performed, RETRIEVE ACKNOWLEDGE message received */ #define MNCC_CAUSE_DTMF_START_SUCCESS (0x8504) /* start of DTMF successfully performed, START DTMF ACKNOWLEDGE message received */ #define MNCC_CAUSE_DTMF_STOP_SUCCESS (0x8505) /* stop of DTMF successfully performed, STOP DTMF ACKNOWLEDGE message received */ #define MNCC_CAUSE_NO_NET_CAUSE (0x85ff) /* network initiated without cause */ #define MNCC_CAUSE_SUCCESS (0xc500) /* operation successfully performed (e.g. a call establishment); this cause is used only if no more specific cause applies */ #define MNCC_CAUSE_DTMF_NOT_ALLOWED (0xc501) /* DTMF is currently not allowed (no speech TCH) */ #define MNCC_CAUSE_DTMF_BUFFER_FULL (0xc502) /* DTMF storage buffer overflow */ #define MNCC_CAUSE_DTMF_ABORTED (0xc503) /* DTMF was aborted (e.g. due to state change) */ #define MNCC_CAUSE_MAX_NO_RECALLS_REACHED (0xc504)/* maximum number of recalls (CCBS) was reached */ #define MNCC_CAUSE_MAX_NO_CALLS_REACHED (0xc505) /* maximum number of calls was reached */ #define MNCC_CAUSE_CHANNEL_SYNC (0xc506) /* channel mode or type information (changed) */ #define MNCC_CAUSE_REEST_STARTED (0xc507) /* call re-establishment started */ #define MNCC_CAUSE_REEST_FINISHED (0xc508) /* call re-establishment is finished */ #define MNCC_CAUSE_NO_MS_CAUSE (0xc5ff) /* MS initiated without cause */ /* * Value constants for VAL_nd */ #define ND_USER_SUSPEND (0x0) /* user suspended */ #define ND_USER_RESUME (0x1) /* user resumed */ #define ND_BEAR_CHANGE (0x2) /* bearer change */ #define ND_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_tos */ #define TOS_NSAP (0x0) /* NSAP (X.213/ISO 8348 AD2) */ #define TOS_USER_SPEC (0x2) /* user specified */ #define TOS_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_odd_even */ #define OE_EVEN (0x0) /* even number of address signals */ #define OE_ODD (0x1) /* odd number of address signals */ /* * Value constants for VAL_key */ #define DIG_0 (0x30) /* digit '0' */ #define DIG_1 (0x31) /* digit '1' */ #define DIG_2 (0x32) /* digit '2' */ #define DIG_3 (0x33) /* digit '3' */ #define DIG_4 (0x34) /* digit '4' */ #define DIG_5 (0x35) /* digit '5' */ #define DIG_6 (0x36) /* digit '6' */ #define DIG_7 (0x37) /* digit '7' */ #define DIG_8 (0x38) /* digit '8' */ #define DIG_9 (0x39) /* digit '9' */ #define DIG_A (0x41) /* 'A' */ #define DIG_B (0x42) /* 'B' */ #define DIG_C (0x43) /* 'C' */ #define DIG_D (0x44) /* 'D' */ #define DIG_STAR (0x2a) /* '(' */ #define DIG_HASH (0x23) /* '#' */ #define DIG_RES (0x7f) /* reserved */ /* * Value constants for VAL_ch_mode */ #define CHM_SIG_ONLY (0x0) /* signalling only */ #define CHM_SPEECH (0x1) /* speech full rate or half rate version 1 */ #define CHM_SPEECH_V2 (0x21) /* speech full rate or half rate version 2 */ #define CHM_SPEECH_V3 (0x41) /* speech full rate or half rate version 3 */ #define CHM_DATA_9_6 (0x3) /* data 9.6 kBit/s */ #define CHM_DATA_4_8 (0xb) /* data 4.8 kBit/s */ #define CHM_DATA_2_4 (0x13) /* data 2.4 kBit/s */ #define CHM_DATA_14_4 (0xf) /* data 2.4 kBit/s */ /* * Value constants for VAL_ch_type */ #define CH_SDCCH (0x0) /* SDCCH channel */ #define CH_TCH_F (0x1) /* TCH Fullrate */ #define CH_TCH_H (0x2) /* TCH Halfrate */ /* * Value constants for VAL_more_data */ #define MD_NO_MORE_DATA (0x0) /* no more data */ #define MD_MORE_DATA (0x1) /* more data */ #define MD_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_prio */ #define PRIO_NORM_CALL (0x0) /* normal call */ #define PRIO_EMERG_CALL (0x1) /* emergency call */ /* * Value constants for VAL_clir_sup */ #define CLR_SUP (0x0) /* CLIR suppressed */ #define CLR_SUP_NOT (0x1) /* CLIR not suppressed */ #define CLR_NOT_PRES (0xff) /* CLIR not present */ /* * Value constants for VAL_sig */ #define SIG_DIAL_TONE_ON (0x0) /* dial tone on */ #define SIG_RING_BACK_TONE_ON (0x1) /* ring back tone on */ #define SIG_INT_TONE_ON (0x2) /* intercept tone on */ #define SIG_NET_CONG_TONE_ON (0x3) /* network congestion tone on */ #define SIG_BUSY_TONE_ON (0x4) /* busy tone on */ #define SIG_CONF_TONE_ON (0x5) /* confirm tone on */ #define SIG_ANS_TONE_ON (0x6) /* answer tone on */ #define SIG_CALL_WAIT_TONE_ON (0x7) /* call waiting tone on */ #define SIG_OFF_HOOK_WARN_TONE_ON (0x8) /* off-hook warning tone on */ #define SIG_TONES_OFF (0x3f) /* tones off */ #define SIG_ALERT_OFF (0x4f) /* alerting off */ #define SIG_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_congest_lev */ #define CL_RECEIVER_READY (0x0) /* receiver ready */ #define CL_RECEIVER_NOT_READY (0xf) /* receiver not ready */ #define CL_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_ss_version */ #define SS_VERSION_2 (0x0) /* phase 2 service, ellipsis notation and phase 2 error handling */ #define SS_VERSION_3 (0x1) /* SS-Protocol version 3 and phase 2 error handling */ #define SS_VER_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_ri */ #define RI_CIRCULAR (0x1) /* circular */ #define RI_SEQUENTIAL (0x3) /* sequential */ #define RI_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_parity */ #define PARITY_ODD (0x0) /* odd parity */ #define PARITY_EVEN (0x2) /* even parity */ #define PARITY_NONE (0x3) /* no parity */ #define PARITY_FORCED_TO_0 (0x4) /* parity forced to zero */ #define PARITY_FORCED_TO_1 (0x5) /* parity forced to one */ /* * Value constants for VAL_bearer_serv */ #define BEARER_SERV_SYNC (0x0) /* synchronous */ #define BEARER_SERV_ASYNC (0x1) /* asynchronous */ #define BEARER_SERV_PAD_ACCESS (0x2) /* PAD access (async) */ #define BEARER_SERV_PACKET_ACCESS (0x3) /* packet access (sync) */ #define BEARER_SERV_FAX (0x4) /* fax */ #define BEARER_SERV_SPEECH (0x5) /* Speech */ #define BEARER_SERV_AUX_SPEECH (0x6) /* Auxiliary Speech */ #define BEARER_SERV_SPEECH_CTM (0x7) /* Speech with CTM (TTY) support */ #define BEARER_SERV_AUX_SPEECH_CTM (0x8) /* Auxiliary Speech CTM (TTY) support */ #define BEARER_SERV_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_modem_type */ #define MT_NONE (0x0) /* modem type none */ #define MT_V21 (0x1) /* modem type V.21 */ #define MT_V22 (0x2) /* modem type V.22 */ #define MT_V22_BIS (0x3) /* modem type V.22bis */ #define MT_V23 (0x4) /* modem type V.23 */ #define MT_V26_TER (0x5) /* modem type V.26ter */ #define MT_V32 (0x6) /* modem type V.32 */ #define MT_UNDEF (0x7) /* modem type for undefined interface */ #define MT_AUTOBAUD (0x8) /* modem type autobauding type 1 */ #define MT_V32_BIS (0x9) /* modem type V.32bis */ #define MT_V34 (0xa) /* modem type V.34 */ /* * Value constants for VAL_rate */ #define UR_0_3_KBIT (0x1) /* rate : 0.3 kbit/s Recommendation X.1 and V.110 */ #define UR_1_2_KBIT (0x2) /* rate : 1.2 kbit/s Recommendation X.1 and V.110 */ #define UR_2_4_KBIT (0x3) /* rate : 2.4 kbit/s Recommendation X.1 and V.110 */ #define UR_4_8_KBIT (0x4) /* rate : 4.8 kbit/s Recommendation X.1 and V.110 */ #define UR_9_6_KBIT (0x5) /* rate : 9.6 kbit/s Recommendation X.1 and V.110 */ #define UR_12_0_KBIT_TRANS (0x6) /* rate : 12.0 kbit/s transparent */ #define UR_1_2_KBIT_V23 (0x7) /* rate : 1.2 kbit/s/75 bit/s Recommendation V.23, X.1,V.110. */ #define UR_14_4_KBIT (0x8) /* rate : 14.4 kbit/s */ #define UR_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_flow_control */ #define INBAND_FLOW_CONTROL (0x8) /* inband flow control (ISO 6429) */ #define NO_FLOW_CONTROL (0xc) /* no flow control (COPnoFLCT) */ #define OUTBAND_FLOW_CONTROL (0xff) /* outband flow control */ /* * Value constants for VAL_conn_elem */ #define CONN_ELEM_TRANS (0x0) /* transparent */ #define CONN_ELEM_NON_TRANS (0x1) /* non transparent (RLP) */ #define CONN_ELEM_TRANS_PREF (0x2) /* both, transparent preferred */ #define CONN_ELEM_NON_TRANS_PREF (0x3) /* both, non transparent (RLP) preferred */ #define CONN_ELEM_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_stop_bits */ #define STOP_1_BIT (0x0) /* one stop bit */ #define STOP_2_BIT (0x1) /* two stop bits */ /* * Value constants for VAL_data_bits */ #define DATA_7_BIT (0x0) /* seven data bits */ #define DATA_8_BIT (0x1) /* eight data bits */ /* * Value constants for VAL_diagnostic */ #define DIAG_MOC_BAR_CUG (0x81) /* Outgoing calls barred within CUG */ #define DIAG_NO_CUG_SELECTED (0x82) /* No CUG selected */ #define DIAG_UNKNOWN_CUG_INDEX (0x83) /* Unknown CUG index */ #define DIAG_INCOMPAT_CUG_INDEX (0x84) /* CUG index incompatible with requested basic service */ #define DIAG_CUG_FAIL_UNSPEC (0x85) /* CUG call Failure unspecified */ #define DIAG_CLIR_NOT_SUBSCRIBED (0x86) /* CLIR not subscribed */ #define DIAG_CCBS_POSSIBLE (0x87) /* CCBS possible */ #define DIAG_CCBS_NOT_POSSIBLE (0x88) /* CCBS not possible */ /* * Value constants for VAL_ss_diag */ #define SS_DIAG_MOC_BAR_CUG (0x1) /* Outgoing calls barred within CUG */ #define SS_DIAG_NO_CUG_SELECTED (0x2) /* No CUG selected */ #define SS_DIAG_UNKNOWN_CUG_INDEX (0x3) /* Unknown CUG index */ #define SS_DIAG_INCOMPAT_CUG_INDEX (0x4) /* CUG index incompatible with requested basic service */ #define SS_DIAG_CUG_FAIL_UNSPEC (0x5) /* CUG call Failure unspecified */ #define SS_DIAG_CLIR_NOT_SUBSCRIBED (0x6) /* CLIR not subscribed */ #define SS_DIAG_CCBS_POSSIBLE (0x7) /* CCBS possible */ #define SS_DIAG_CCBS_NOT_POSSIBLE (0x8) /* CCBS not possible */ #define SS_DIAG_NOT_PROVIDED (0xff) /* Not Provided */ /* * Value constants for VAL_sns_mode */ #define SNS_MODE_VOICE (0x0) /* voice calls */ #define SNS_MODE_VAF_VOICE (0x1) /* voice alternating FAX, voice first */ #define SNS_MODE_FAX (0x2) /* FAX calls */ #define SNS_MODE_VAD_VOICE (0x3) /* voice alternating data, voice first */ #define SNS_MODE_DATA (0x4) /* data calls */ #define SNS_MODE_VAF_FAX (0x5) /* voice alternating FAX, FAX first */ #define SNS_MODE_VAD_DATA (0x6) /* voice alternating data, data first */ #define SNS_MODE_VFD (0x7) /* voice followed by data */ /* * Value constants for VAL_dtmf_mod */ #define DTMF_MOD_AUTO (0x0) /* automatic mode with fixed duration */ #define DTMF_MOD_MAN_START (0x1) /* manual mode start sending DTMF digit */ #define DTMF_MOD_MAN_STOP (0x2) /* manual mode stop sending DTMF digit */ /* * Value constants for VAL_bc_mod */ #define BC_MOD_CODE (0x0) /* code bearer capabilities */ #define BC_MOD_DECODE (0x1) /* decode bearer capabilities */ /* * Value constants for VAL_rcl_type */ #define RCL_CCBS (0x0) /* CCBS */ #define RCL_CCBS_1 (0x1) /* treated as CCBS */ #define RCL_CCBS_2 (0x2) /* treated as CCBS */ #define RCL_CCBS_3 (0x3) /* treated as CCBS */ #define RCL_CCBS_4 (0x4) /* treated as CCBS */ #define RCL_CCBS_5 (0x5) /* treated as CCBS */ #define RCL_CCBS_6 (0x6) /* treated as CCBS */ /* * Value constants for VAL_synccs */ #define SYNCCS_MPTY_EVENT (0x0) /* Multi party event */ #define SYNCCS_NOT_PRESENT (0xffff) /* Synchronization cause not present */ /* * Value constants for VAL_mpty_event */ #define MPTY_BUILD_SENT (0x0) /* BuildMPTY Invoke sent */ #define MPTY_BUILD_FAIL (0x1) /* BuildMPTY Invoke failed */ #define MPTY_BUILD_SUCCESS (0x2) /* BuildMPTY Invoke ok */ #define MPTY_SPLIT_SENT (0x3) /* SplitMPTY Invoke sent */ #define MPTY_SPLIT_FAIL (0x4) /* SplitMPTY Invoke failed */ #define MPTY_SPLIT_SUCCESS (0x5) /* SplitMPTY Invoke Return Result ok */ #define MPTY_HOLD_SENT (0x6) /* HoldMPTY Invoke sent */ #define MPTY_HOLD_FAIL (0x7) /* HoldMPTY Invoke failed */ #define MPTY_HOLD_SUCCESS (0x8) /* HoldMPTY Invoke ok */ #define MPTY_RETRIEVE_SENT (0x9) /* RetrieveMPTY Invoke */ #define MPTY_RETRIEVE_FAIL (0xa) /* RetrieveMPTY Invoke failed */ #define MPTY_RETRIEVE_SUCCESS (0xb) /* RetrieveMPTY Invoke Return Result ok */ #define MPTY_NOT_PRESENT (0xff) /* Parameter not present */ /* * Value constants for VAL_ctm_ena */ #define CTM_DISABLED (0x0) /* CTM not supported */ #define CTM_ENABLED (0x1) /* CTM supported */ /* * Value constants for VAL_ton */ #define TON_UNKNOWN (0x0) /* unknown */ #define TON_INT_NUMB (0x1) /* international number */ #define TON_NAT_NUMB (0x2) /* national number */ #define TON_NET_SPEC_NUMB (0x3) /* network specific number */ #define TON_DED_ACC_SC (0x4) /* dedicated access, short code */ #define TON_NOT_PRES (0xff) /* type of number not present */ /* * Value constants for VAL_npi */ #define NPI_UNKNOW (0x0) /* unknown */ #define NPI_ISDN_TEL_NUMB_PLAN (0x1) /* ISDN/telephony numbering plan */ #define NPI_DATA_NUMB_PLAN (0x3) /* data numbering plan */ #define NPI_TELEX_NUMB_PLAN (0x4) /* telex numbering plan */ #define NPI_NAT_NUMB_PLAN (0x8) /* national numbering plan */ #define NPI_PRIV_NUMB_PLAN (0x9) /* private numbering plan */ #define NPI_NOT_PRES (0xff) /* numbering plan identification not present */ /* * Value constants for VAL_present */ #define PRES_PRES_ALLOW (0x0) /* presentation allowed */ #define PRES_PRES_REST (0x1) /* presentation restricted */ #define PRES_NUMB_NOT_AVAIL (0x2) /* number not available due to interworking */ #define PRES_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_screen */ #define SCREEN_USER_PROV_NOT_SCREEN (0x0) /* user provided, not screened */ #define SCREEN_USER_PROV_VER_PASS (0x1) /* user provided, verified and passed */ #define SCREEN_USER_PROV_VER_FAIL (0x2) /* user provided, verified and failed */ #define SCREEN_NET_PROV (0x3) /* network provided */ #define SCREEN_IND_NOT_PRES (0xff) /* not present */ /* * user defined constants */ #define FACILITY_LEN (0xfb) #define USER_LEN (0x83) #define MAX_CC_CALLING_NUMBER (0x16) #define MAX_CC_REDIR_NUMBER (0x20) #define MAX_CC_CALLED_NUMBER (0x50) #define SUB_LENGTH (0x14) #define MAX_BC_LEN (0xa) #define CC_ORIGINATING_ENTITY (0x5) #define ACI_ORIGINATING_ENTITY (0x1) #define MAX_CC_CAUSE_LENGTH (0x1e) #include "CDG_LEAVE.h" #endif