view src/g23m-fad/t30/cus_t30.h @ 686:59f07d67eb45

luna target split into luna1 and luna2 luna1 is FC Luna based on iWOW DSK v4.0 or v5.0 motherboard luna2 is FC Luna based on FC Caramel2 MB
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 12 Oct 2020 18:51:24 +0000
parents 90eb61ecd093
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  CUS_T30
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Custom dependent definitions for the
|             Protocol Stack Entity
|             T30
+----------------------------------------------------------------------------- 
*/ 

#ifndef CUS_T30_H
#define CUS_T30_H

/*==== CONSTANTS ==================================================*/
/*
 * TIMER_VALUES
 *
 * Description :  The constants define the timer values
 *                for the T30 timers
 *                If the target system uses other units please
 *                change the values.
 */


#define T1_VALUE   35000  /* ms +/- 5000 ms */
#define T2_VALUE    6000  /* ms +/- 1000 ms */
#define T4_VALUE    3000  /* ms +/- 15%     */
#define DCN_VALUE    500
#define MSG_VALUE  12500
#define FRAMES_400  1846

/*
 * TIMER IDENTIFIER
 *
 * Description :  The constants define the identifier of the
 *                timer resources of T30. The identifier is used
 *                to reference a timer in a config primitive
 */

#define T1_NAME "T1"
#define T2_NAME "T2"
#define T4_NAME "T4"

/*
 * MAX_T30_TIMER
 *
 * Description :  The constant define the number of timer
 *                available in the timer pool. This should be
 *                the amount of timer which can be active
 *                simultaneously.
 */

#define MAX_T30_TIMER           3

/*
 * VERSION
 *
 * Description :  The constants define the type and the value
 *                of a version identification. The version
 *                is part of the monitor struct.
 */

#define T_VERSION      char
#define VERSION_T30  "T30 2.0" /* NEW_FRAME only */

/*
 * VSI_CALLER
 *
 * Description :  For multithread applications the constant VSI_CALLER
 *                must be defined to identify the calling thread of the
 *                VSI-Interface. This must be done correponding to the
 *                type of T_VSI_CALLER in VSI.H. The comma symbol is
 *                neccessary because the vsi-functions are called
 *                like this vsi_t30 (VSI_CALLER par2, par3 ...)
 */

#ifdef OPTION_MULTITHREAD
  #define VSI_CALLER t30_handle,
  #define VSI_CALLER_SINGLE t30_handle
#else
  #define VSI_CALLER
  #define VSI_CALLER_SINGLE
#endif

#endif