view cdg3/sap/udp.pdf @ 673:62a5285e014a

Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango Back in 2015 the Mother's idea was to produce a FreeCalypso development board that would be a clone of TI Leonardo, including the original quadband RFFE; one major additional stipulation was that this board needed to be able to run original unmodified TCS211-20070608 firmware with all blobs intact, with only minimal binary patches to main.lib and tpudrv.lib. The necessary patched libs were produced at that time in the tcs211-patches repository. That plan was changed and we produced FCDEV3B instead, with Openmoko's triband RFFE instead of Leonardo quadband, but when FC Magnetite started in 2016, a TPUDRV_blob= provision was still made, allowing the possibility of patching OM's tpudrv.lib for a restored Leonardo RFFE. Now in 2020 we have FC Tango which is essentially a verbatim clone of Leonardo core, including the original quadband RFFE. We have also deblobbed our firmware so much that we have absolutely no real need for a blob version of tpudrv.lib - but I thought it would be neat to put the ancient TPUDRV_blob= mechanism (classic config) to its originally intended use, just for the heck of it.
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 29 May 2020 03:55:36 +0000
parents c15047b3d00d
children
line wrap: on
line source

;********************************************************************************
;*** File           : udp.pdf
;*** Creation       : Wed Mar 11 09:58:55 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : udp
;*** Document No.   : 8444.100.00.006
;*** Document Date  : 2003-08-26
;*** Document Status: BEING_PROCESSED
;*** Document Author: JK
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:56:22 2007"
PRAGMA 	LAST_MODIFIED 	"2003-08-26"
PRAGMA 	ID_AND_VERSION 	"8444.100.00.006"






VALTAB 	VAL_port
VAL 	0 	UDP_AUTOASSIGN_PORT 	"UDP must assign a free port number"

VALTAB 	VAL_err
VAL 	0 	UDP_BIND_NOERROR 	"no error"
VAL 	1 	UDP_BIND_PORTINUSE 	"port already in use"
VAL 	2 	UDP_BIND_UDPDOWN 	"udp is deactivated"




VAR 	port 	"destination port" 	S

VAL 	@p_udp - VAL_port@ 	

VAR 	err 	"error code" 	B

VAL 	@p_udp - VAL_err@ 	

VAR 	dst_port 	"destination port" 	S


VAR 	src_port 	"source port" 	S


VAR 	err_msg 	"error message" 	B


VAR 	src_addr 	"source address" 	L


VAR 	dst_addr 	"destination address" 	L








; UDP_BIND_REQ 	0x80000046
; UDP_BIND_CNF 	0x80004046
; UDP_CLOSEPORT_REQ 	0x80010046
; UDP_CLOSEPORT_CNF 	0x80014046
; UDP_ERROR_IND 	0x80024046
; UDP_ERROR_RES 	0x80020046
; UDP_SHUTDOWN_IND 	0x80034046
; UDP_SHUTDOWN_RES 	0x80030046



PRIM 	UDP_BIND_REQ 	0x80000046
{
 	port 	 ; port
}






PRIM 	UDP_BIND_CNF 	0x80004046
{
 	port 	 ; port
 	err 	 ; error code
}






PRIM 	UDP_CLOSEPORT_REQ 	0x80010046
{
 	port 	 ; port
}






PRIM 	UDP_CLOSEPORT_CNF 	0x80014046
{
}






PRIM 	UDP_ERROR_IND 	0x80024046
{
 	dst_port 	 ; Destination port
 	src_port 	 ; source port
 	err_msg 	 ; error message
 	src_addr 	 ; source address
 	dst_addr 	 ; Destination address
}






PRIM 	UDP_ERROR_RES 	0x80020046
{
}






PRIM 	UDP_SHUTDOWN_IND 	0x80034046
{
}






PRIM 	UDP_SHUTDOWN_RES 	0x80030046
{
}