FreeCalypso > hg > fc-magnetite
view src/aci2/aci/cmh_uart.h @ 673:62a5285e014a
Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango
Back in 2015 the Mother's idea was to produce a FreeCalypso development
board that would be a clone of TI Leonardo, including the original
quadband RFFE; one major additional stipulation was that this board
needed to be able to run original unmodified TCS211-20070608 firmware
with all blobs intact, with only minimal binary patches to main.lib
and tpudrv.lib. The necessary patched libs were produced at that time
in the tcs211-patches repository.
That plan was changed and we produced FCDEV3B instead, with Openmoko's
triband RFFE instead of Leonardo quadband, but when FC Magnetite started
in 2016, a TPUDRV_blob= provision was still made, allowing the possibility
of patching OM's tpudrv.lib for a restored Leonardo RFFE.
Now in 2020 we have FC Tango which is essentially a verbatim clone of
Leonardo core, including the original quadband RFFE. We have also
deblobbed our firmware so much that we have absolutely no real need
for a blob version of tpudrv.lib - but I thought it would be neat to put
the ancient TPUDRV_blob= mechanism (classic config) to its originally
intended use, just for the heck of it.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 29 May 2020 03:55:36 +0000 |
parents | 93999a60b835 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : CMH_UART +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : +----------------------------------------------------------------------------- */ #ifndef CMH_UART_H #define CMH_UART_H EXTERN T_ACI_LIST *uart_src_params; EXTERN T_ACI_LIST *uart_com_par; /*==== CONSTANTS ==================================================*/ #define NOT_SUPPORTED_UART_IO_PA_MARK 4 /* the UART does not support parity mark directly */ /*==== TYPES ======================================================*/ typedef struct { UBYTE *data; USHORT data_len; T_ACI_CMD_SRC srcId; } T_ACI_DTI_SEND; typedef T_comPar T_ACI_UART_COM_PAR; typedef struct { UBYTE device; T_ACI_UART_COM_PAR comPar; } T_ACI_DEVICE_ENTRY; /*==== PROTOTYPES =================================================*/ /*==== EXPORT =====================================================*/ EXTERN void timeout_PlusIPR (void); EXTERN BOOL cmhUART_CMUX (T_ACI_CMD_SRC srcId); EXTERN void cmhUART_lst_init (void); EXTERN BOOL cmhUARTtest_srcId (UBYTE srcId, void *elem); EXTERN BOOL cmhUARTtest_device (UBYTE device, void *elem); EXTERN T_ACI_DTI_PRC *cmhUART_find_dlci (T_ACI_LIST *search_list, UBYTE device, UBYTE dlci ); EXTERN void cmhUART_startConnection (UBYTE srcId, T_ACI_DEVICE_TYPE device_type); EXTERN BOOL cmhUART_stopConnection (UBYTE srcId); EXTERN void cmhUART_getdata ( T_ACI_CMD_SRC srcId ); EXTERN void cmhUART_ParmsUpdated( UBYTE device ); EXTERN void cmhUART_DetectedESC_DTR( UBYTE device, UBYTE dlci, UBYTE cause ); EXTERN void cmhUART_init_ipr_params(void); /* * functions for cotroling UART parameters (baud rate, character framing, flow control) */ EXTERN void cmhUART_AddDeviceToComParameter( UBYTE device ); EXTERN void cmhUART_CleanComParameterList( void ); EXTERN T_ACI_DEVICE_TYPE cmhUART_GetDeviceType( UBYTE srcId ); EXTERN BOOL cmhUART_ChangeDeviceType( UBYTE srcId, T_ACI_DEVICE_TYPE device_type ); EXTERN T_ACI_DEVICE_ENTRY* cmhUART_GetDeviceParOverDevice( UBYTE device ); EXTERN T_ACI_DEVICE_ENTRY* cmhUART_GetDeviceParOverSrcID( UBYTE srcId ); EXTERN void cmhUART_SetComParToUnchanged( T_comPar *comPar ); EXTERN T_ACI_RETURN cmhUART_SetDataRate ( UBYTE srcId, T_ACI_BD_RATE rate); EXTERN T_ACI_RETURN cmhUART_SetCharacterFraming ( UBYTE srcId, T_ACI_BS_FRM format, T_ACI_BS_PAR parity ); EXTERN T_ACI_RETURN cmhUART_SetFlowControl(UBYTE srcId, T_ACI_RX_FLOW_CTRL DCE_by_DTE); EXTERN T_ACI_BS_FRM cmhUART_GetFktInterfaceFormat( T_ACI_UART_COM_PAR *comPar ); EXTERN T_ACI_BS_PAR cmhUART_GetFktInterfaceParity( T_ACI_UART_COM_PAR *comPar ); EXTERN UBYTE cmhUART_GetParityOverSrcID( UBYTE srcId ); EXTERN UBYTE cmhUART_GetDataBitOverSrcID( UBYTE srcId ); EXTERN UBYTE cmhUART_GetStopBitOverSrcID( UBYTE srcId ); EXTERN void cmhUART_lst_exit (void); #ifdef CMH_UARTF_C GLOBAL T_ACI_AT_CMD uartEntcurCmd[CMD_SRC_MAX]; #else EXTERN T_ACI_AT_CMD uartEntcurCmd[]; #endif /* CMH_UARTF_C */ #endif /* CMH_UART_H */ /*==== EOF =======================================================*/