view src/aci2/bmi/mmiMain.c @ 673:62a5285e014a

Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango Back in 2015 the Mother's idea was to produce a FreeCalypso development board that would be a clone of TI Leonardo, including the original quadband RFFE; one major additional stipulation was that this board needed to be able to run original unmodified TCS211-20070608 firmware with all blobs intact, with only minimal binary patches to main.lib and tpudrv.lib. The necessary patched libs were produced at that time in the tcs211-patches repository. That plan was changed and we produced FCDEV3B instead, with Openmoko's triband RFFE instead of Leonardo quadband, but when FC Magnetite started in 2016, a TPUDRV_blob= provision was still made, allowing the possibility of patching OM's tpudrv.lib for a restored Leonardo RFFE. Now in 2020 we have FC Tango which is essentially a verbatim clone of Leonardo core, including the original quadband RFFE. We have also deblobbed our firmware so much that we have absolutely no real need for a blob version of tpudrv.lib - but I thought it would be neat to put the ancient TPUDRV_blob= mechanism (classic config) to its originally intended use, just for the heck of it.
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 29 May 2020 03:55:36 +0000
parents 3c2acfa1a72f
children
line wrap: on
line source

/*******************************************************************************

	  CONDAT (UK)

********************************************************************************

 This software product is the property of Condat (UK) Ltd and may not be
 disclosed to any third party without the express permission of the owner.

********************************************************************************

 $Project name: Basic MMI
 $Project code: BMI (6349)
 $Module:   MMI
 $File:       MmiMain.c
 $Revision:   1.0

 $Author:   Condat(UK)
 $Date:       22/02/01

********************************************************************************

 Description:



********************************************************************************

 $History: MmiMain.c

 	Nov 09, 2005    REF: DVT OMAPS00056873 xdeepadh
   	Description: Deactivating Bright Light on I-Sample
   	Solution: On Isample boards the backlight is set off, since the bright LEDS are very disturbing.
 
  	xpradipg - LOCOSTO-ENH-31895 : 23 June 2005
 	Description:	Support for various audio profiles
 	Solution:	The support for audio device's carkit/headset/loudspeaker/handheld.
 			The audio device is enabled as per the user actions.	
	Jul 05, 2005    REF: SPR 31894 xdeepadh
   	Description: Proposed chnages for Locosto-live sign off
   	Solution: UICC SIM API will be used for Locosto.

 	x0018858 24 Mar, 2005 MMI-FIX-11321
	Issue Description :- If the inbox is full and a new message is receivd, no indication is received.
	Fix: Added support for handling indication when message box is full and
	there is a pending message.
 	Apr 05, 2005    REF: ENH 29994 xdeepadh
   	Description: Implementation of Generic Midi Ringer and Modification of existing Midi Test Application
   	Solution: Generic Midi Ringer and Midi Test Application were implemented.
   	
	Jan 07, 2005 REF: CRR 26394 xkundadu 
	Issue description:Logo of the operator not displayed
	Solution: Set the network operator logo display option to enbled state. 
 
 	Oct 19, 2004 REF: CRR MMI-SPR-26002 xkundadu 
	Issue description:  Golite booting problem.
  	Solution: If the FFS is not formatted, prevent writing into the FFS.
  	
	Aug 16, 2004    REF: CRR 24323   Deepa M.D
	Bug:Clenup of sprintf used for tracing
	Fix:Replace the char buf[]; sprintf (buf, "...", ...); TRACE_EVENT (buf); statements by TRACE_EVENT_PX

 	Jul 22,2004 CRR:20896 xrashmic - SASKEN
 	Description: The current time format is not highlighted
 	Fix: The time format is written into flash. Instead of providing the submenu 
 	directly we call a function where we set the menu and also higlight the 
 	previously selected menu item


    	May 10, 2004    REF: CRR 15753  Deepa M.D 
	Menuitem provided to set the validity period to maximum.

    	25/10/00	Original Condat(UK) BMI version.
    	
  Dec 23, 2005    REF: SR13873 x0020906
	Description: To stop playing ringtone when new sms arrives - when user is in any menu screen.
	Fix : Fix is done in keyAction ().	
    
 $End

*******************************************************************************/

#include <stdio.h>
#define ENTITY_MFW

/* includes */
#include <string.h>
#include <stdio.h>
#include <stdlib.h>

#include "typedefs.h"
#include "vsi.h"
#include "pei.h"
#include "custom.h"
#include "gsm.h"

#include "mfw_sys.h"

#include "mfw_mfw.h"
#include "mfw_kbd.h"
#include "mfw_tim.h"
#include "mfw_lng.h"
#include "mfw_win.h"
#include "mfw_icn.h"
#include "mfw_sim.h"
#include "mfw_nm.h"
/* SPR#1428 - SH - New Editor changes */
#ifndef NEW_EDITOR
#include "mfw_edt.h"
#endif
#include "mfw_mnu.h"
#include "mfw_phb.h"
#include "mfw_sms.h"
#include "Mfw_td.h"/*SPR 1725*/
#ifdef SIM_TOOLKIT
#include "mfw_sat.h"
#endif
#include "dspl.h"


#include "p_mmi.h"
#include "message.h"
#include "prim.h"
#include "aci_cmh.h"
#include "mfw_mme.h"

#ifndef _SIMULATION_
/* BEGIN ADD: Neptune Alignment */
#ifndef NEPTUNE_BOARD
/* END ADD: Neptune Alignment */
#include "sys_types.h"
/* BEGIN ADD: Neptune Alignment */
#else 
#include "bmi_integ_misc.h"
#endif
/* END ADD: Neptune Alignment */
#endif

#include "MmiMmi.h"
/* SPR#1428 - SH - New Editor changes */
#ifdef NEW_EDITOR
#include "ATBCommon.h"
#include "ATBDisplay.h"
#include "ATBEditor.h"
#include "AUIEditor.h"
#endif

#include "Mmiicons.h"
#include "MmiPins.h"
#include "MmiMain.h"
#include "MmiDialogs.h"
#include "MmiIdle.h"
#include "MmiStart.h"
#include "mmiCall.h"
#include "MmiSimToolkit.h"
#include "gdi.h"
#include "audio.h"
#include "MmiLists.h"
#include "MmiSounds.h"
#include "MmiResources.h"
#include "MmiSettings.h"
#include "MmiTimeDate.h"

#include "cus_aci.h"
#include "prim.h"
#ifndef PCM_2_FFS
#include "pcm.h"
#endif


#ifdef FF_MMI_AUDIO_PROFILE
#include "MmiColours.h"
#endif


static MfwHnd times;	      /* clock via software timer */
static MfwHnd times_switchoff;		/* timer switch off (GB)*/

					/* GLOBAL CONTROL DATA	    */
LngInfo mainLngInfo;			/* language control block   */
MfwHnd mainMmiLng;			/* global language handler  */

/* Taking idle data - RAVI - 23-12-2005 */
#ifdef NEPTUNE_BOARD
extern T_idle idle_data;
#endif
/* END RAVI - 23-12-2005 */

#ifndef _SIMULATION_
extern void AI_Power(SYS_UWORD8 power);
#endif

#ifdef NEPTUNE_BOARD  /* Removal of linker errors */
void SIM_PowerOff (void);
#endif

static int keyAction (MfwEvt e, MfwKbd *res);
static int key (MfwEvt e, MfwKbd *kc);
static int timer (MfwEvt e, MfwTim *t);
static void backlight (void);
static int timesEvent (MfwEvt e, MfwTim *t);
static void showGoodBye (T_MFW_HND win);
static void goodbye_cb (void);



static MfwHnd mme;				/* our MME manager	     */

U16 GlobalIconStatus;
UBYTE globalMobileMode;
int MmiModule;

// ADDED BY RAVI - 28-11-2005
EXTERN int flash_formatted(void);
EXTERN void time_date_init(void);
EXTERN void sms_cb_exit (void);
EXTERN void time_date_delete(void);
EXTERN UBYTE getCurrentRingerSettings(void);
EXTERN UBYTE CphsPresent(void);
EXTERN void  cphs_support_check(void);
// END RAVI

/* batterie and signal	  start  */
int globalBatteryUpdate(U8 value);
int globalSignalUpdate(U8 value);

//  	xpradipg - LOCOSTO-ENH-31895 : 23 June 2005
#ifdef FF_MMI_AUDIO_PROFILE
extern void mfw_audio_device_indication(U8 notify);
extern 	 void mmi_hook_handle();
void mmi_device_status_info(T_MFW_HND parent, int str1, int str2, T_VOID_FUNC callback);
#endif


void globalFlashBattery (void);

UBYTE globalBatteryPicNumber;
UBYTE globalSignalPicNumber;

UBYTE globalBatteryMode; /*  */
int globalMme(MfwEvt e, void *para);
/* batterie and signal	   end	*/

/*MC SPR 1725 removed current clock and date variables*/

static LONG second;
static U8 deregis = FALSE;	      /* status deregistration	     */

// SH 6/03/02 - HUPKeyOrigin is 1 if POWER_KEY is pressed in idle screen, 0 otherwise
// Means that long press of HUP key will go to idle screen, not just shut down
UBYTE HUPKeyOrigin;
int off_switch;	/* distinguish between on- and off switching to display a goodbye message*/
/* SPR877 - SH - set to TRUE if welcome animation has finished */
extern UBYTE animation_complete;

T_MFW_CFLAG_STATUS DivertStatus = MFW_CFLAG_NOTSet;
#define TIME_MINUTE	60000
#define TIMEDOWN	120000L 	/* time for powerdown 2min  */
#define TIME_SWITCH_OFF 3000	     /* switch off time delay */
//Jul 05, 2005    REF: SPR 31894 xdeepadh
//The reader_id  BSP_UICC_DEFAULT_READER_ID will be 0x01. 
#ifdef TI_PS_UICC_CHIPSET_15
#define BSP_UICC_DEFAULT_READER_ID 0x01
#endif


/* Amounts to: 128 (format mode) + 8 (overwrite mode) */

/*******************************************************************************

 $Function:

 $Description:	general editor control

 $Returns:    none.

 $Arguments:

*******************************************************************************/

/* SPR#1428 - SH - New Editor changes - this version of editControls used
 * by new editor.  The rest is now in AUITextEntry */

#ifdef NEW_EDITOR

UBYTE editControls [KCD_MAX] =	    /* edit control keys:	*/
{
    '0', '1', '2', '3', '4', '5', '6', '7', '8', '9',
    '*', '#', ctrlNone, ctrlNone, ctrlUp, ctrlDown, ctrlLeft, ctrlRight,
    ctrlNone, ctrlNone, ctrlEnter, ctrlNone, ctrlNone, ctrlNone,
    ctrlNone, ctrlNone, ctrlEnter
};

#else /* NEW_EDITOR */

static MfwHnd myHandle = 0;		/* editors handle	    */
static MfwHnd editTim = 0;		/* the editor timer	    */
static char *formatHandle;	  // SH - pointer to format string, so that editEventKey can see it
static int *formatIndex;	// SH - pointer to format index
static int *fieldIndex; 	// SH - pointer to field position
static char *tmpBuf;	      // SH - pointer to temporary buffer for hidden alphanumeric entry

#define KEY_PAD_MAX 5

UBYTE editControls [KCD_MAX] =	    /* edit control keys:	*/
{
    '0', '1', '2', '3', '4', '5', '6', '7', '8', '9',
    '*', '#', ecNone, ecNone, ecUp, ecDown, ecLeft, ecRight,
    ecNone, ecNone, ecEnter, ecNone, ecNone, ecNone,
    ecNone, ecNone, ecEnter
};

static UBYTE editAlphaMode;		   /* alpha mode flag	       */
static UBYTE editCalcMode;		  /* calculator mode flag	   */
static UBYTE editFormatMode;	  /* format mode flag */
static UBYTE editHiddenMode;	  /* hidden alphanumeric mode */
static UBYTE editAlphaLevel;		   /* alpha level selected     */
static UBYTE editAlphaKey;		   /* alpha mode current key   */



static UBYTE editAlpha [12][KEY_PAD_MAX] =	     /* alpha mode characters	 */
{
    {'.','+','-','=','0'},		//0 key
    {' ','?','!','1',':'}, {'a','b','c','2',')'}, {'d','e','f','3','('},     // 1 2 3
    {'g','h','i','4','$'}, {'j','k','l','5',' '}, {'m','n','o','6',','},     // 4 5 6
  {'p','q','r','s','7'}, {'t','u','v','8',';'}, {'w','x','y','z','9'},	  // 7 8 9
  {'*','#','%','&',' '}, {' ','\'','\"','@','/'}  // star and hash keys
};

static UBYTE editAlphaU [12][KEY_PAD_MAX] =	  /* upCase alpha mode characters*/
{
  {'.','+','-','=','0'},	      //0 key
    {' ','?','!','1',':'}, {'A','B','C','2',')'}, {'D','E','F','3','('},    // 1 2 3
    {'G','H','I','4','$'}, {'J','K','L','5',' '}, {'M','N','O','6',','},   // 4 5 6
  {'P','Q','R','S','7'}, {'T','U','V','8',';'}, {'W','X','Y','Z','9'}, // 7 8 9
  {'*','#','%','&',' '}, {' ','\'','\"','@','/'}		// star and hash keys
};


int upCase= TRUE;


static int editEventTim (MfwEvt e, MfwTim *t);
static void editShowHeader (void);

#endif /* NEW_EDITOR */

#ifdef FF_MMI_AUDIO_PROFILE
extern T_call call_data;
#endif

#ifdef NEPTUNE_BOARD
#ifdef MMI_POWER_MANAGEMENT_TEST
EXTERN MfwHnd timer_handle;
EXTERN unsigned char Screen_Update;
#endif
#endif

/*******************************************************************************

 $Function:  mainInit

 $Description:	 init MMI main module

 $Returns:    none.

 $Arguments:

*******************************************************************************/
void mainInit (UBYTE InitCause)
{
	int i;
	T_MFW_SMS_INFO sms_settings;
	//x0018858 24 Mar, 2005 MMI-FIX-11321
	//added structures for storing the indication settings and CMER settings.
	T_ACI_MM_CIND_VAL_TYPE cindSettings;
	T_ACI_MM_CMER_VAL_TYPE cmerSettings;
    TRACE_FUNCTION("maininit");

    mfwSetSignallingMethod(1);
    winAutoFocus(TRUE);
    mfwSetFocus(0);			/* reset focus		    */


    /*MC SPR 1111*/
		/*MC check to see if  language already selected and saved to FFS*/

//  Oct 19, 2004 REF: CRR MMI-SPR-26002 xkundadu 
//  Issue description:  Golite booting problem.
//  Solution: If the FFS is not formatted, dont write into the FFS.
//                In that case just set the langauge to English and do the mmi
//		     layout settings.
	if(flash_formatted() == TRUE)
	{
		if (flash_read() >= EFFS_OK)
		{	TRACE_EVENT_P1("FFS_flashData.language: %d", FFS_flashData.language);
			
			/*MC SPR 1150 if language is not 0 and not greater than the maximum language code*/
			if (FFS_flashData.language != NULL && FFS_flashData.language<= NO_OF_LANGUAGES)
				MmiRsrcSetLang(FFS_flashData.language);/*MC, change to stored language*/
			else
				MmiRsrcSetLang(ENGLISH_LANGUAGE);
			
			/*API - 28/07/03 - CQ10203 - If the flash value not set set to default VP_REL_24_HOURS*/
			if((FFS_flashData.vp_rel != VP_REL_1_HOUR)   && 
				(FFS_flashData.vp_rel != VP_REL_12_HOURS) &&				  
				(FFS_flashData.vp_rel != VP_REL_24_HOURS) && 
				(FFS_flashData.vp_rel != VP_REL_1_WEEK)&&
				(FFS_flashData.vp_rel != VP_REL_MAXIMUM))   //  May 10, 2004    REF: CRR 15753  Deepa M.D 
			{
				FFS_flashData.vp_rel = VP_REL_24_HOURS;
			}
			/*API - 28/07/03 - CQ10203 - END */

			/*NDH - 13/01/04 - CQ16753 - Propogate the Validity Period Settings to the ACI */
			sms_settings.vp_rel = FFS_flashData.vp_rel;
			(void)sms_set_val_period(&sms_settings);
			/*NDH - 13/01/04 - CQ16753 - END */
		}
		else
		{	
			/* GW If flash read fails set up default settings. */
			/* This will also save the settings to flash */
			memset(&FFS_flashData, 0x00, sizeof(FFS_flashData));
			/*default language is english*/
			setUserSettings2Default();
		}
	}
//  Oct 19, 2004 REF: CRR MMI-SPR-26002 xkundadu 
//  Issue description:  Golite booting problem.
//  Solution: If the FFS is not formatted, dont write into the FFS.
//                In that case just set the langauge to English and mmi
//		     layout settings.
	else
	{
		 // Set the default language to English.
		 MmiRsrcSetLang(ENGLISH_LANGUAGE);

		//  Jan 07, 2005 REF: CRR 26394 xkundadu 
		//  Issue description:Logo of the operator not displayed
		//  Solution: Set the network operator logo display option to enbled state. 
		//  Set  other user settings also to default values.

		 #ifndef MMI_LITE
			memset(&FFS_flashData, 0x00, sizeof(FFS_flashData));
			setUserSettings2Default();
		 #endif
	}
/*mc end*/
	HUPKeyOrigin = 0;  // sbh
	off_switch=0;	/* 0 is stands for mobile is swiched on */
	animation_complete = FALSE;

    kbdAlways((MfwCb)keyAction);	/* global keyboard access   */
    kbdTime(2000,1000,400);		/* long / repeat timeouts   */

    mainMmiLng = lngCreate(0,0,&mainLngInfo,0); /* language handler */

	// times clock event
    times = timCreate(0,TIME_MINUTE,(MfwCb)timesEvent);
//  	xpradipg - LOCOSTO-ENH-31895 : 23 June 2005
//	additional events addes for carkit and headset 
#ifdef FF_MMI_AUDIO_PROFILE
	 mme = mmeCreate(0, MfwMmeSignal|MfwMmeBattery|MfwMmeBaState|MfwMmeHeadset|MfwMmeCarkit, (MfwCb)globalMme);
#else
	 mme = mmeCreate(0, MfwMmeSignal|MfwMmeBattery|MfwMmeBaState, (MfwCb)globalMme);
#endif

    /*Setup when we want the backlight to come on*/
// 	Nov 09, 2005    REF: DVT OMAPS00056873 xdeepadh
//On Isample boards the backlight is set off, since the bright LEDS are very disturbing.
    
	for (i=0;i<BL_LAST_OPTION;i++)
#if (BOARD == 71)
	mme_setBacklightEvent(i,BL_NO_LIGHT);
#else
	mme_setBacklightEvent(i,BL_MAX_LIGHT);
#endif

#if (BOARD == 71)
	mme_setBacklightEvent(BL_IDLE_TIMER,BL_NO_LIGHT);
#else
	mme_setBacklightEvent(BL_IDLE_TIMER,BL_SET_IDLE);
#endif

	mme_setBacklightEvent(BL_EXIT,BL_NO_LIGHT);
	
	/*and tell the backlight that the init event has happened */
	mme_backlightEvent(BL_INIT);

	//x0018858 24 Mar, 2005 MMI-FIX-11321
	//Added two functions to set the indication and CMER values.
	//begin
	sms_set_cind_values(&cindSettings);
	sms_set_cmer_values(&cmerSettings);
	//end.

//RM test 14-07 second = 0;
   /*SPR 1725, replace FFS clock data with RTC*/
	time_date_init();

    deregis = FALSE;
      timStart(times);		       /*      start clock	    */


    startExec(PhoneInit,0);		 /* get it rolling	    */

}

/*******************************************************************************

 $Function:  mainExit

 $Description:	 exit MMI main module

 $Returns:    none.

 $Arguments:

*******************************************************************************/
void mainExit (UBYTE InitCause)
{
  TRACE_FUNCTION("mainExit");

  startExit();
  sim_exit();			      /* finit SIM handler	  */
    lngDelete(mainMmiLng); mainMmiLng = 0;
    timDelete(times);
    sms_cb_exit ();/*MC SPR1920 clean up cell broadcast*/
    mmeDelete(mme); mme = 0;
    kbdAlways(0);
    dspl_ClearAll();
	time_date_delete();/*SPR 1725*/
//Apr 05, 2005    REF: ENH 29994 xdeepadh
//Free the memory 
  #ifdef FF_MIDI_RINGER  
	sounds_midi_exit();
  #endif
}

/*******************************************************************************

 $Function:  keyAction

 $Description:	 handler called on every keyboard action

 $Returns:

 $Arguments:

*******************************************************************************/
static int keyAction (MfwEvt e, MfwKbd *res)
{
  /* this function "keyAction" is called 4*times from MFW per each keypress */
  /* twice for keypress and twice for keyrelease */
  /* the variable "toggle" is using to avoid to play the keypadtone twice ! */
    static UBYTE toggle = TRUE;
#ifdef NEPTUNE_BOARD    /*  OMAPS00033660   */
    static unsigned char cKeySound = 0;
#endif

  /* this mask is use to filter the keyevent "e" */
  /* want to use KEY_0, KEY_1,......  KEY_HASH */
  USHORT  mask = 0x0FFF;
	
	/* Initialize - RAVI - 23-12-2005 */
  UBYTE currentRinger = 0;


  /* terminate the ringing in all situation (it doesnt matter where the user is */
  if ( (e & KEY_HUP) && (e & KEY_MAKE) )
  {
/* Apr 05, 2005    REF: ENH 29994 xdeepadh */
/* terminate the ringing */
#ifndef FF_MIDI_RINGER  
	currentRinger = getCurrentRingerSettings();
	audio_StopSoundbyID( AUDIO_BUZZER, currentRinger );
#endif

  }

  /* the power-off-key ! */
  if ( (e & KEY_POWER) && (e & KEY_MAKE))
  {	
    TRACE_EVENT("KEY_POWER pressed !!!!");

	if (pinsIsFocussed() EQ FOCUSSED_PINS)
    {
    	pin_exit();
    	HUPKeyOrigin=1;
    }
    else if (idleIsFocussed())
	{
    	HUPKeyOrigin=1;
	}
    
    if ((HUPKeyOrigin==1) && (off_switch == 0))
	{
		/*
		** Only pass through this once, off_switch must be 0 because Key_Action is called twice
		** for each key press.
		*/
		TRACE_EVENT("In idle window.");
	    showGoodBye ( idle_get_window () ); 
	    times_switchoff = timCreate(0,THREE_SECS,(MfwCb)goodbye_cb);
	    timStart(times_switchoff);
	    off_switch++;
	    deregis = TRUE;
    }
  }

  HUPKeyOrigin = 0;


  /* every other calls */
  if(toggle)
  {
#ifdef SIM_TOOLKIT
       /*SPR#2121 - DS - Only download event to SAT if the event has been registered
        * by the SAT Setup Event List command
        */
      if (satEvtRegistered(SatEvtUserActionActivated) == TRUE)
      {
        satEvtDownload(SatEvtUserAction);
      }
#endif

/* Stop Playing ring tone - RAVI - 23-12-2005 */
 #ifdef NEPTUNE_BOARD    
	if(idle_data.new_sms == TRUE)
	{
		currentRinger = getcurrentSMSTone();
		audio_StopSoundbyID( AUDIO_BUZZER, currentRinger );

		/* Till this audio is stopped and next is played. */
		vsi_t_sleep( 0, 10 );
	}

	cKeySound = 1;  /*  OMAPS00033660   */
	if( idle_data.edt_buf[0] != '\0' )
	{
		if( idle_data.edt_buf[0] == '*'  ||  idle_data.edt_buf[0] == '#' )
      		{
      			cKeySound = 0;
		}
	}
	else
	{
		if ( (e & KEY_HASH) || ( e & KEY_STAR ) )
		{
			cKeySound = 0;
		}
	}

	if( cKeySound == 1 )
	{
      
 #endif   /*  OMAPS00033660   */
 /* END RAVI - 23-12-2005 */

    if ((FFS_flashData.settings_status & SettingsKeypadClick) && (e & KEY_MAKE))  
    {
      TRACE_EVENT ("Keypad Click activ");
/* Start Playing key tones on key press - RAVI 23-12-2005 */
#ifndef NEPTUNE_BOARD
     audio_PlaySoundID(0, TONES_KEYBEEP, 200, AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */ 
#else
/* RAVI - 20-1-2006 */
	/* Silent Implementation */
       /* Changed 0 to getCurrentVolumeSetting () */
    audio_PlaySoundID(0, (TONES_KEYBEEP), getCurrentVoulmeSettings(),
                                     AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#endif
/* END RAVI */
    }
    else if ((FFS_flashData.settings_status & SettingsKeypadDTMF) && (e & KEY_MAKE))
    {
      TRACE_EVENT ("Keypad DTMF activ");
      switch (e &= mask)
	{
	case KEY_0:
/* RAVI - 20-1-2006 */		
#ifdef NEPTUNE_BOARD
       audio_PlaySoundID(0, (TONES_DTMF_0), getCurrentVoulmeSettings(), AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#else
	  audio_PlaySoundID(0, (TONES_DTMF_0), 0, AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#endif
/* END RAVI */
	break;
	case KEY_1:
/* RAVI - 20-1-2006 */		
#ifdef NEPTUNE_BOARD
       audio_PlaySoundID(0, (TONES_DTMF_1), getCurrentVoulmeSettings(), AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#else
	  audio_PlaySoundID(0, TONES_DTMF_1, 0, AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#endif
/* END RAVI */
	break;
	case KEY_2:
/* RAVI - 20-1-2006 */		
#ifdef NEPTUNE_BOARD
       audio_PlaySoundID(0, (TONES_DTMF_2), getCurrentVoulmeSettings(), AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#else		
	  audio_PlaySoundID(0, TONES_DTMF_2, 0, AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#endif
/* END RAVI */
	break;
	case KEY_3:
/* RAVI - 20-1-2006 */		
#ifdef NEPTUNE_BOARD
       audio_PlaySoundID(0, (TONES_DTMF_3), getCurrentVoulmeSettings(), AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#else				
	  audio_PlaySoundID(0, TONES_DTMF_3, 0, AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#endif
/* END RAVI */
	break;
	case KEY_4:
/* RAVI - 20-1-2006 */		
#ifdef NEPTUNE_BOARD
       audio_PlaySoundID(0, (TONES_DTMF_4), getCurrentVoulmeSettings(), AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#else						
	  audio_PlaySoundID(0, TONES_DTMF_4, 0, AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#endif
/* END RAVI */
	break;
	case KEY_5:
/* RAVI - 20-1-2006 */		
#ifdef NEPTUNE_BOARD
       audio_PlaySoundID(0, (TONES_DTMF_5), getCurrentVoulmeSettings(), AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#else						
	  audio_PlaySoundID(0, TONES_DTMF_5, 0, AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#endif
/* END RAVI */
	break;
	case KEY_6:
/* RAVI - 20-1-2006 */		
#ifdef NEPTUNE_BOARD
       audio_PlaySoundID(0, (TONES_DTMF_6), getCurrentVoulmeSettings(), AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#else						
	  audio_PlaySoundID(0, TONES_DTMF_6, 0, AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#endif
/* END RAVI */
	break;
	case KEY_7:
/* RAVI - 20-1-2006 */		
#ifdef NEPTUNE_BOARD
       audio_PlaySoundID(0, (TONES_DTMF_7), getCurrentVoulmeSettings(), AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#else						
	  audio_PlaySoundID(0, TONES_DTMF_7, 0, AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#endif
/* END RAVI */
	break;
	case KEY_8:
/* RAVI - 20-1-2006 */		
#ifdef NEPTUNE_BOARD
       audio_PlaySoundID(0, (TONES_DTMF_8), getCurrentVoulmeSettings(), AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#else						
	  audio_PlaySoundID(0, TONES_DTMF_8, 0, AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#endif
/* END RAVI */
	break;
	case KEY_9:
/* RAVI - 20-1-2006 */		
#ifdef NEPTUNE_BOARD
       audio_PlaySoundID(0, (TONES_DTMF_9), getCurrentVoulmeSettings(), AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#else				
	  audio_PlaySoundID(0, TONES_DTMF_9, 0,AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#endif
/* END RAVI */
	break;
	case KEY_STAR:
/* RAVI  - 20-1-2006 */		
#ifdef NEPTUNE_BOARD
       audio_PlaySoundID(0, (TONES_DTMF_STAR), getCurrentVoulmeSettings(), AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#else						
	  audio_PlaySoundID(0, TONES_DTMF_STAR, 0, AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#endif
/* END RAVI */
	break;
	case KEY_HASH:
/* RAVI - 20-1-2006 */		
#ifdef NEPTUNE_BOARD
       audio_PlaySoundID(0, (TONES_DTMF_HASH), getCurrentVoulmeSettings(), AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#else						
	  audio_PlaySoundID(0, TONES_DTMF_HASH, 0, AUDIO_PLAY_ONCE ); /* GW#2355 /CQ11341 */
#endif
/* END RAVI */
	break;
	default:
	  break;

      }
    }

#ifdef NEPTUNE_BOARD
      	}
 #endif

  }

  /* toggle the variable */
  if(toggle)
  {
    toggle = FALSE;
  }
  else
  {
    toggle = TRUE;
  }


  return 0;
}

/*******************************************************************************

 $Function:  key

 $Description:	 keyboard event handler

 $Returns:    none.

 $Arguments:

*******************************************************************************/
// switching the mobile on
static int key (MfwEvt e, MfwKbd *kc)
{

TRACE_FUNCTION("Initial key");
//---------------start : Mobile On-------------------
    TRACE_EVENT("	      Mobile ON");
    /* set the state of mobile on   */
    globalMobileMode = (globalMobileMode | GlobalMobileOn);


//startExec(PhoneInit,0);	      /* get it rolling 	  */

    return 1;
}
/*******************************************************************************

 $Function:  globalMme

 $Description:	MME event handler

 $Returns:    none.

 $Arguments:

*******************************************************************************/
int globalMme(MfwEvt e, MfwHnd para)
{
    MfwMme* mc = (MfwMme*)para;

    U8	value;
#ifdef FF_MMI_AUDIO_PROFILE
	 MfwHnd       win  = call_data.win_incoming;
	 MfwWin     * win_data ;
	 T_dialog_info * data;
	 T_MFW_HND       parent_win;
	 USHORT          Identifier;
	 void (* Callback)();

	if( win != NULL)
	{
		win_data = (MfwWin*)((T_MFW_HDR *)win)->data;
	 	data = (T_dialog_info *)win_data->user;
	 	parent_win = data->parent_win;
	 	Identifier = data->Identifier;
	 	Callback= data->Callback;
	}
#endif	
 
	TRACE_FUNCTION("globalMme");
	
    switch(e) {
    case MfwMmeSignal :
	TRACE_EVENT("Mme Event: Signal");
	value = (U8)mc->value;//JVJE
	/***************************Go-lite Optimization changes Start***********************/
	//Aug 16, 2004    REF: CRR 24323   Deepa M.D
	TRACE_EVENT_P1 ("Event MfwMmeSignal  %d", value);
	/***************************Go-lite Optimization changes end***********************/
	globalSignalUpdate(value); /*Update the value of the fieldstrength  */

	break;

    case MfwMmeBattery:
       TRACE_EVENT("Mme Event: Battery....");
	break;


    case MfwMmeBaState:
	TRACE_EVENT("Mme Event: State....");

	value = (U8)mc->value;
	switch(value)
	{

	/* External Power Plugged Off */
    	case 0:
      		TRACE_EVENT("Mme Event:Discharging");
	    	globalMobileMode = globalMobileMode & (~GlobalCharging);
	    	globalMobileMode = globalMobileMode & (~GlobalBatteryPower);
	break;

	/* Mme Event: External Power Connected or End of Charge */
       case 1:
      		TRACE_EVENT("Mme Event:GlobalBatteryPower");
	   	 globalMobileMode = globalMobileMode & (~GlobalCharging);
	    	globalMobileMode = (globalMobileMode | GlobalBatteryPower);
	    /* indicate that the battery is full*/
	  	globalBatteryMode = GlobalBatteryFull;
	 	 TRACE_EVENT("globalBatteryPicNumber = GlobalBatteryFull");
	break;
	/* Mme Event: Start of Charge */
	case 2:
	    TRACE_EVENT("Mme Event:Charging");
	    globalMobileMode = globalMobileMode & (~GlobalBatteryPower);
	    globalMobileMode = (globalMobileMode | GlobalCharging);
	    globalFlashBattery ();
	break;
	default:
	    break;
    }
    break;
//  	xpradipg - LOCOSTO-ENH-31895 : 23 June 2005
#ifdef FF_MMI_AUDIO_PROFILE	
//indicates the events related to the headset
	case MfwMmeHeadset:
		value = (U8)mc->value;
		switch(value)
		{
			case AUDIO_HEADSET_HOOK_DETECT:
			{
				TRACE_EVENT("AUDIO_HEADSET_HOOK_DETECT");
				if( winIsFocussed(call_data.win_incoming))
				{	
					dialog_info_destroy(win);
					(Callback)(parent_win,Identifier, INFO_KCD_LEFT);
				}
				else if(call_data.win)
					mmi_hook_handle();
			}
			break;
			case AUDIO_HEADSET_UNPLUGGED:
				TRACE_EVENT("AUDIO_HEADSET_UNPLUGGED");
				mmi_device_status_info(NULL,TxtHeadset,TxtRemoved,NULL);
				mfw_audio_device_indication(value);
				break;
			case AUDIO_HEADSET_PLUGGED:
				TRACE_EVENT("AUDIO_HEADSET_PLUGGED");
				mmi_device_status_info(NULL,TxtHeadset,TxtInserted,NULL);
				mfw_audio_device_indication(value);
				break;
		}
		break;
//indicates the events related to the carkit		
	case MfwMmeCarkit:
		value = (U8) mc->value;
		switch(value)
		{
			case AUDIO_CARKIT_UNPLUGGED:	
				TRACE_EVENT("AUDIO_CARKIT_UNPLUGGED");
				mmi_device_status_info(NULL,TxtCarkit,TxtRemoved,NULL);
				mfw_audio_device_indication(value);
				break;
			case AUDIO_CARKIT_PLUGGED:
				TRACE_EVENT("AUDIO_CARKIT_PLUGGED");
				mmi_device_status_info(NULL,TxtCarkit,TxtInserted,NULL);
				mfw_audio_device_indication(value);
				break;
		}
		break;
#endif

    default:
	return 1;
    }
    return 1;
}

/*******************************************************************************

 $Function:  backlight

 $Description:	switch on backlight for certain time

 $Returns:    none.

 $Arguments:

*******************************************************************************/
static void backlight (void)
{


}

/*******************************************************************************

 $Function:  timesEvent

 $Description:	 times event  clock

 $Returns:    none.

 $Arguments:

*******************************************************************************/
static int timesEvent (MfwEvt e, MfwTim *t)
{

		      //RM only for PC testing
  second += 60; 			  /* increase seconds	      */

 
   idleEvent(IdleUpdate);

   /*MC CONQUEST 5999->6007,21/05/02 if CPHS reading didn't work on switch-on, try again*/
   if (CphsPresent() == CPHS_ERR)
		cphs_support_check();
	

  mme_backlightEvent(BL_IDLE_TIMER);
	
  timStart(times);

  return 1;
}


/*******************************************************************************

 $Function:  showCLOCK

 $Description:	display clock

 $Returns:    none.

 $Arguments:

*******************************************************************************/
void showCLOCK(void)
{	/*SPR 1725, use new function to get clock string*/
    dspl_TextOut(30,24,0,(char *)mfw_td_get_clock_str());
}
/*******************************************************************************

 $Function:  setClockFormat

 $Description:	used to switch between 24 hour and 12 hour display format

 $Returns:    none.

 $Arguments:  format enum

*******************************************************************************/
void setClockFormat(UBYTE format)
{/*SPR 1725, use new function to set clock format*/
  if (format == MFW_TIME_FORMAT_12HOUR)
    FFS_flashData.time_format = MFW_TIME_FORMAT_12HOUR;
  else
    FFS_flashData.time_format = MFW_TIME_FORMAT_24HOUR;
// Jul 22,2004 CRR:20896 xrashmic - SASKEN
// The timeformat was not being written into the flash.
  flash_write();
  
  mfw_td_set_time_format((T_MFW_TIME_FORMAT)format);
}
// Issue Number : MMI-SPR-12159 on 07/04/04 by Rashmi C N and Deepa M D
// change by Sasken ( Rashmi C N  and Deepa M D) on April 07th 2004
// Bug : The AM PM for 12 hour fomrat was not being shown
// Solution : Added the following function to get the current time format from flash
UBYTE getClockFormat()
{
	  return    FFS_flashData.time_format;
}

/*SPR 1725, removed ClockSet and DateSet functions*/

/*******************************************************************************

 $Function:  showDATE

 $Description:	 display date

 $Returns:

 $Arguments:

*******************************************************************************/
void showDATE(void)
{/*SPR 1725, use new function to get date string*/
    dspl_TextOut(0,10,0,mfw_td_get_date_str());

}


/*******************************************************************************

 $Function:  displayAlignedText

 $Description:	Display text horizontally aligned [left|right|center] in specified row.


 $Returns:    none.

 $Arguments:

*******************************************************************************/
void displayAlignedText( T_MMI_ALIGN x_alignment, USHORT y_lineNum, UBYTE attrib, char* string )
{
    int stringLength = 0;
    USHORT startXPos = 0;      // starting X pos for display

    dspl_DevCaps deviceCaps;

    dspl_GetDeviceCaps(&deviceCaps);

	/* SPR#1983 - SH - Shouldn't use strlen for unicode string.
	 * 0 means whole string will be used. */
	 
    stringLength = (int)dspl_GetTextExtent(string, 0);

	TRACE_EVENT_P2("aligned %d, extent = %d", x_alignment, stringLength);
	
    switch ( x_alignment )
    {
	case LEFT:

	break;

	case RIGHT:
	    startXPos = (USHORT) deviceCaps.Width - stringLength /*- OneCharLen*/ ;
	break;

	case CENTER:
	    startXPos = (USHORT) (deviceCaps.Width - stringLength) / 2;
	break;

    }

  dspl_TextOut(startXPos, y_lineNum, attrib, (char*)string );
}
/*******************************************************************************

 $Function:  displayAlignedPrompt

 $Description:	Display prompt horizontally aligned [left|right|center] in specified row.

 $Returns:

 $Arguments:

*******************************************************************************/
void displayAlignedPrompt( T_MMI_ALIGN x_alignment, USHORT y_lineNum, UBYTE attrib, int string_id )
{
    int stringLength = 0;
    USHORT startXPos = 0;      // starting X pos for display

    dspl_DevCaps deviceCaps;

    dspl_GetDeviceCaps(&deviceCaps);


    /* Marcus: Issue 1123: 12/09/2002: Replaced use of strlen with dspl_str_length for Unicode */
    stringLength=dspl_str_length((char*)MmiRsrcGetText( string_id ));
     switch ( x_alignment )
    {
        case LEFT:

        break;

        case RIGHT:
            startXPos = (USHORT) deviceCaps.Width - stringLength /*- OneCharLen*/ ;
        break;

        case CENTER:
            startXPos = (USHORT) (deviceCaps.Width - stringLength) / 2;
        break;

    }

	PROMPT(startXPos, y_lineNum, attrib, string_id );
}
/*******************************************************************************

 $Function:  mainShutdown  

 $Description:	 

 $Returns:		none.

 $Arguments:	
 
*******************************************************************************/
void mainShutdown(void)
{

    TRACE_FUNCTION("mainShutdown ()");

    if(deregis)
    {
   //---------------start: Mobile OFF-------------------
	TRACE_EVENT("		     Mobile OFF");
	/* delete the state of mobile on   */
	globalMobileMode = globalMobileMode & (~GlobalMobileOn);

	deregis = FALSE;

    mmiExit();/* RM 20-07 */

//Jul 05, 2005    REF: SPR 31894 xdeepadh	
// SIM functionality has been replaced by UICC in Locosto.
#ifdef TI_PS_UICC_CHIPSET_15
	simdrv_poweroff(BSP_UICC_DEFAULT_READER_ID);
#else
	SIM_PowerOff();
#endif
#ifndef _SIMULATION_
    AI_Power(0);
#endif

    }
}
/*******************************************************************************

 $Function:  globalBatteryUpdate

 $Description:	Update the value of the battery after the MME event

 $Returns:

 $Arguments:

*******************************************************************************/
int globalBatteryUpdate (U8 value)
{

    MmiModuleDel (ModuleBattLow);  /* delete the state */

    globalBatteryMode = GlobalBatteryGreater5;



  switch (value)
  {
    case 0:	      /* battery low */
	  globalBatteryPicNumber = 0;
	  globalBatteryMode = GlobalBatteryLesser5;

	  /* is just a global status */
	  MmiModuleSet (ModuleBattLow);  /* set the state */


    break;

    case 1:
	  globalBatteryPicNumber = 1;
    break;

    case 2:
	  globalBatteryPicNumber = 2;
    break;

    case 3:
	  globalBatteryPicNumber = 3;
    break;

    case 4:
	  globalBatteryPicNumber = 4;
    break;

    default:
	  globalBatteryPicNumber = 2;
    break;
  }

    idleEvent(IdleUpdate);

    return 0;
}


/*******************************************************************************

 $Function:  globalSignalUpdate

 $Description:Update the value of the fieldstrength after the MME event

 $Returns:

 $Arguments:

*******************************************************************************/
int globalSignalUpdate (U8 value)
{

  globalSignalPicNumber = value;
  
  idleEvent(IdleUpdate);
#ifdef NEPTUNE_BOARD
  dspl_Enable(1);
#endif
  return 0;
}



/*******************************************************************************

 $Function:  globalFlashBattery

 $Description:	 exit MMI main module

 $Returns:    none.

 $Arguments:

*******************************************************************************/
void globalFlashBattery (void)
{
    TRACE_EVENT(" globalFlashBattery ");

    globalBatteryPicNumber++;

    if(globalBatteryPicNumber > 4)
	globalBatteryPicNumber = 0;

  idleEvent(IdleUpdate);
    TRACE_EVENT(" start the timer for Blink ");


}

/* SPR#1428 - SH - New Editor: this is all obsolete with new editor.  Equivalent
 * functionality can be found in AUITextEntry.c */
 
#ifndef NEW_EDITOR
/*******************************************************************************

 $Function:  editShowHeader

 $Description:	 displays the new character over the cursor

 $Returns:    none.

 $Arguments:

*******************************************************************************/
/*MC SPR 1242 merged in b-sample version of this function */
static void editShowHeader (void)
{
	int	alphachar;
	MfwEdt *edit = ((MfwHdr *) myHandle)->data;

	TRACE_FUNCTION("editShowHeader");

	edtChar(myHandle,ecDel);
    if (upCase)
    	alphachar = editAlphaU[editAlphaKey][editAlphaLevel];
    else
        alphachar = editAlpha[editAlphaKey][editAlphaLevel];

    if (!(editAlphaMode && editAlphaKey != KCD_MAX))
    	alphachar= ' ';
    else if (editHiddenMode)													// SH - in hidden mode...
    	tmpBuf[edit->cp] = alphachar;											// store character in buffer
#ifdef NO_ASCIIZ
	/*MC, SPR 940/2 01/08/02, don't need to check for language, tag should be enough*/
	if (edit->attr->text[0] == 0x80/*MC 22/07/02*/)
		alphachar = alphachar << 8;
#endif
{/*NM p025*/
	edit->attr->alphaMode = TRUE;
}
	
	edtChar(myHandle,alphachar);

	/* 
	is this actually useless after insert a 
	character to call "ecRight" and then "ecLeft"
	For the multitap we need only two steps:
	"ecDel" plus insert the character
	
	edtChar(myHandle,ecLeft);*/


	{edit->attr->alphaMode = FALSE;}

	/*p025 end*/

}

/*******************************************************************************

 $Function:  editEventTim  

 $Description:	 executes the timer event from the edit component

 $Returns:		none.

 $Arguments:	
 
*******************************************************************************/
/*MC SPR 1242 merged in b-sample version of this function */
static int editEventTim (MfwEvt e, MfwTim *t)
{
  char	*format = formatHandle; 		      // SH - temporary format template

  TRACE_FUNCTION("editEventTim");

    if (!(editAlphaMode || editFormatMode))
        return 1;


/*MC, SPR925 23/07/02, removed variable assignment for chinese */
	
	// SH - modifications for format mode & hidden mode
	if (editFormatMode)															// SH - advance format pointer when
	{
		if (editHiddenMode)
		{
			editCharFindNext('*');
		}
		else
			editCharFindNext(ecRight);
	}
	else if (editHiddenMode)
	{
		edtChar(myHandle,'*');
	}
	// end of modifications
	
	else
    	edtChar(myHandle,ecRight);
	
    editAlphaLevel = KEY_PAD_MAX-1;
    editAlphaKey = KCD_MAX;

    return 1;
}


/*******************************************************************************

 $Function:  editEventKey  

 $Description:	 executes the timer event form the edit component

 $Returns:		none.

 $Arguments:	
 
*******************************************************************************/
int editEventKey (MfwEvt e, MfwKbd *k)
{
/*MC SPR 1242 merged in b-sample version of this function */
	MfwEdt *edit;
	char *tb;
    UBYTE  ch = '.';

    char		*format = formatHandle;											// SH - temporary format template
    char		formatchar;														// SH - Current format character
    char		alphachar;														// SH - Current multi-tap character
    int			safetycounter;													// SH - Stops searching forever to find compatible character
    BOOL		validCharacter;													// SH - flag to indicate whether character is accepted

	BOOL		unicode;														/* SPR957 - SH - TRUE if string is unicode */
	
	/*NM p026*/
	if (!myHandle)													// If we've reached the end of the format string, don't allow input 
		return 1;

	/* Over the editor handle "e" we have now the access to 
	 * the editor buffer "tb". We need it e.g "editCalcMode" 
	 * to check the buffer */
	 
    edit = ((MfwHdr *) myHandle)->data;
    tb = edit->attr->text;
	/*p026 end*/
	
	/* SPR957 - SH - TRUE if string is unicode */
    if (tb[0]==0x80)
    	unicode = TRUE;
    else
    	unicode = FALSE;
	
	/* SH - formatted input mode (for WAP) */
	
	if (editFormatMode)
	{
		if (k->code==KCD_HUP)													// Escape from edit screen
            return 0;

		if (edit->cp >= (edit->attr->size))									// If at last character of editor, don't
		{
			return 1;															// print character
		}
		
		formatchar = format[*formatIndex];
		
       	if (formatchar == NULL)													// If we've reached the end of the format string, don't allow input 
       		return 1;
       		
		if ((formatchar>'0' && formatchar<='9') || formatchar=='*')				// Delimiter for format field
    	{
        	(*formatIndex)++;
        	*fieldIndex		= 0;
        	formatchar 		= format[*formatIndex];							// Next character is the format for the field
		}
		        
        /* Multi-tap input
		 *
         * The user presses a different key, meaning the previous character must be entered */
        
    	if (editAlphaKey != KCD_MAX && editAlphaKey != k->code)
	{
	        timStop(editTim);

	        alphachar = NULL;
	        
	        switch(formatchar)
		{
    			case 'X':														// Uppercase alphabetic only
    			case 'A':														// Uppercase alphabetic or punctuation
    				alphachar = editAlphaU[editAlphaKey][editAlphaLevel];
					break;
					
    			case 'x':														// Lowercase alphabetic only
				case 'a':														// Lowercase alphabetic or punctuation
					alphachar = editAlpha[editAlphaKey][editAlphaLevel];
				break;

				case 'M':
				case 'm':
					if (upCase)
						alphachar = editAlphaU[editAlphaKey][editAlphaLevel];
					else
						alphachar = editAlpha[editAlphaKey][editAlphaLevel];
				break;
        	}

			if (alphachar!=NULL)
			{
				if (editHiddenMode)									// SH - in hidden mode...
            	{
	            	tmpBuf[edit->cp] = alphachar;							// store character in buffer
	            	alphachar = '*';								// ...and show star
            	}
				editCharFindNext(alphachar);									// Add number to buffer & advance cursor
				editAlphaLevel = KEY_PAD_MAX-1;
		        editAlphaKey = KCD_MAX;
		        if (edit->cp >= (edit->attr->size))							// If at last character of editor, don't
					return 1;													// allow another character
			}
        }

		formatchar = format[*formatIndex];
		
		if (k->code <= KCD_9)													// Key pressed is 0 - 9.
			{

			/* Numeric */
			
			if (formatchar == 'N')												// A numeric digit is expected
			{
				if (editHiddenMode)
            	{
					tmpBuf[edit->cp] = editControls[k->code];
					editCharFindNext('*');
            	}
				else
	        		editCharFindNext(editControls[k->code]);						// Add number to buffer & advance cursor
		        editAlphaLevel = KEY_PAD_MAX-1;									// Reset multi-tap settings
				editAlphaKey = KCD_MAX;
				return 1;
	        }

			/* Multi-tap alphanumeric */

			alphachar = NULL;

  			if (!strchr("XxAaMm",formatchar))									// If not a valid format code, exit
  				return 1;
  			
          	if (strchr("Xx",formatchar) && k->code<KCD_2)						// 0 and 1 keys not valid in these modes
        		return 1;

    		editAlphaKey = k->code;												// Store the key pressed
			editAlphaLevel++;													// Increment through list of symbols
			if (editAlphaLevel > (KEY_PAD_MAX-1))								// List wraps round
				editAlphaLevel = 0;
			
    		safetycounter = 0;
    		while (alphachar==NULL && safetycounter<KEY_PAD_MAX)
			{
    			validCharacter = FALSE;
    			
    			switch(formatchar)
				{
    				case 'X':
    					alphachar = editAlphaU[editAlphaKey][editAlphaLevel];	// Uppercase...
    					validCharacter = (alphachar>='A' && alphachar<='Z');	// ...alphabetic only
					break;
					
					case 'x':
    					alphachar = editAlpha[editAlphaKey][editAlphaLevel];	// Lowercase
    					validCharacter = (alphachar>='a' && alphachar<='z');	// ...alphabetic only
    				break;

    				case 'A':
    					alphachar = editAlphaU[editAlphaKey][editAlphaLevel];	// Uppercase...
    					validCharacter = (alphachar<'0' || alphachar>'9');		// ..non-numeric
    				break;

    				case 'a':
    					alphachar = editAlpha[editAlphaKey][editAlphaLevel];	// Lowercase...
    					validCharacter = (alphachar<'0' || alphachar>'9');		// ..non-numeric
    				break;

    				case 'M':
    				case 'm':
    					if (upCase)												// User-selected case...
    						alphachar = editAlphaU[editAlphaKey][editAlphaLevel];
    					else
    						alphachar = editAlpha[editAlphaKey][editAlphaLevel];
    					validCharacter = TRUE;									// ...any character accepted
    				break;
				}
    				
    			if (!validCharacter)											// If character isn't uppercase alphabetic,
				{															// find the next one that is,
					alphachar = NULL;
    				safetycounter++;											// (but don't search forever)
    				editAlphaLevel++;
    				if (editAlphaLevel > (KEY_PAD_MAX-1))
						editAlphaLevel = 0;
				}
			}

			if (alphachar!=NULL)				// If we've found a character, and string isn't max size
			{
				if (editHiddenMode)
            	{
					tmpBuf[edit->cp] = alphachar;
            	}
				edtChar(myHandle,alphachar);
				edtChar(myHandle,ecLeft);
				timStart(editTim);
			}
			else
				editAlphaKey = KEY_MAX;
			return 1;
			}

		if (k->code==KCD_HASH)													// Hash key
		{
			if (strchr("AaMm",formatchar))
			{
				if (editHiddenMode)
            	{
					tmpBuf[edit->cp] = ' ';
					editCharFindNext('*');
            	}
				else
					editCharFindNext(' ');										// Prints a space in this mode
				}
			return 1;
			}

		if (k->code==KCD_STAR)													// Star key
		{
			if (strchr("AaMm",formatchar))
			{
				if (editHiddenMode)
            	{
					tmpBuf[edit->cp] = '*';
            	}
				editCharFindNext('*');
			}
			return 1;
		}
		
        return 1;
	}
	
	/************************/
	/* Normal multi-tap mode */
	/************************/

    if (editAlphaMode)
    {
        if (editAlphaKey != KCD_MAX && editAlphaKey != k->code)
        {
            timStop(editTim);

/*MC SPR 925, 23/07/02, removed editshowheader for chinese*/
           	edtChar(myHandle,ecRight);
/*MC SPR 925, 23/07/02,removed shifting of alphachar, not needed here, merged from ealier code*/
        			
            editAlphaLevel = KEY_PAD_MAX-1;
            editAlphaKey = KCD_MAX;
        }
	
        if (k->code <= KCD_HASH)
        {
            editAlphaLevel++;
            if (editAlphaLevel > (KEY_PAD_MAX-1))
                editAlphaLevel = 0;
            if (editAlphaKey == KCD_MAX)						// Inserting a new character
        	{
	        	TRACE_EVENT("Inserting character.");
				/*MC, SPR 925, 23/07/02 removed insert space and ecLeft if Chinese*/
			
	            /* NM p01306
	               the patch p027 to reduce calling the edtChar as less as possible 
	               was not working for inserting characters.
	               This additional change should work now:
	            */
				if (unicode)	/*SPR957 - SH - use new unicode flag */
				{
		            moveRightUnicode((U16 *)&edit->attr->text[edit->cp*2],1);					
				}
				else
				{
		            moveRight(&edit->attr->text[edit->cp],strlen(&edit->attr->text[edit->cp]),1);
		        }
				/* NM p01306 END */
			}
		}
    	editAlphaKey = k->code;
    	editShowHeader();
        timStart(editTim);
        return 1;
    }

	alphachar = NULL;
	
    switch (k->code)
    {
        case KCD_HUP:
            return 0;
        case KCD_HASH:
	        /* KGT: If not in an alpha mode insert blanc. 
	                    But in numeric mode insert '#'. */
		    if (editAlphaMode)
		    {
		    	alphachar = ' ';
				editShowHeader();
		    }
		    else
		    {
		    	if (editCalcMode)
		    	{
					if(!(strchr(tb, ch ))) /* set '.' only once ! */
						alphachar = '.';
		    	}
		    	else
		    		alphachar = '#';
		    }
		    /* end KGT */

		    /* SH - hidden mode */
			if (editHiddenMode)
			{
				tmpBuf[edit->cp] = alphachar;
				alphachar = '*';
			}
			/* end of hidden mode */

			/* SPR957 - In unicode mode, character is shifted to second byte */
			if (unicode)
				alphachar = alphachar << 8;
			
		    edtChar(myHandle,alphachar);
	        return 1;
	    		
        case KCD_STAR:

	    	if (editCalcMode)
	    	{
				if(!(strchr(tb, ch ))) /* set '.' only once ! */
					alphachar = '.';		/* SPR957 - SH*/
		    		/*edtChar(myHandle,'.');*/
	    	}
	    	else
	    	{
	    		/*if (!editAlphaMode)
                	edtChar(myHandle,'*');
	    		else     */
	    		if (editAlphaMode)
	    		{	
	    			editShowHeader();
	    		}

	    		alphachar = '*';
	    		
	    	    /* SH - hidden mode */
                if (editHiddenMode)
            	{
					tmpBuf[edit->cp] = '*';
            	}
				/* end of hidden mode */

				/* SPR957 - SH - In unicode mode, character is shifted to second byte */
				if (unicode)
					alphachar = alphachar << 8;
				edtChar(myHandle,alphachar);
	    	}
            return 2;									// SH -  2 indicates that character WAS printed
            
        case KCD_ABC:
            editAlphaMode = (UBYTE) !editAlphaMode;
            if (editAlphaMode)
            {
                editAlphaLevel = KEY_PAD_MAX-1;
                editAlphaKey = KCD_MAX;
            }
            editShowHeader();
            return 1;
        default:
		if (editAlphaMode){
			timStop(editTim);
			edtChar(myHandle,ecRight);
			return 1;
		}
		break;
    }

    /* SH - hidden mode */
    if (editHiddenMode)
	{
    	tmpBuf[edit->cp] = editControls[k->code];
    	alphachar = '*';	/* SPR957 - SH*/
    	/* SPR957 - In unicode mode, character is shifted to second byte */
		if (unicode)
			alphachar = alphachar << 8;
			
    	edtChar(myHandle,alphachar);
	}
     /* end of hidden mode */
    else
    {	/*MC SPR 964, sets alphamode to FALSE when in digits mode, so that cursor moves right*/
    	edit->attr->alphaMode = editAlphaMode;
    	edtChar(myHandle,editControls[k->code]);
    }

    return 1;
}


/*******************************************************************************

 $Function:  editClear

 $Description:	SH - For formatted input, clears everything except fixed characters

 $Returns:

 $Arguments:

*******************************************************************************/
/*MC SPR 1242 merged in b-sample version of this function */
void editClear()
{
	int editIndex = 0;
	MfwEdt *edit = ((MfwHdr *) myHandle)->data;
    char *tb = edit->attr->text;
    
	*formatIndex = -1;															// Find first non-fixed character,
	edtChar(myHandle,ecTop);													// starting from the top.
	editCharFindNext(NULL);

	while (edit->cp <strlen(tb))
	{
		editCharFindNext(' ');														// Overwrite everything with spaces
	}
	edtChar(myHandle,ecTop);
	*formatIndex = -1;
	editCharFindNext(NULL);															// Return to the first non-fixed character
	
	return;
}


/*******************************************************************************

 $Function:  editCharFindNext 

 $Description:	SH - For formatted input, adds a character to the input buffer then finds
 				the next non-fixed character space for the cursor to occupy

 $Returns:		

 $Arguments:	character - the character (or code) to print
 
*******************************************************************************/
/*MC SPR 1242 merged in b-sample version of this function */
void editCharFindNext(char character)
{
	char	*format = formatHandle;												// SH - temporary format template
	char	formatchar;
	MfwEdt	*edit = ((MfwHdr *) myHandle)->data;
	UBYTE	inField = 0;								// =1 if entering field, =2 if in field 

	TRACE_EVENT("editCharFindNext");

	// Check for delimited field
	
	if (*formatIndex>0)
	{
		formatchar = format[*formatIndex-1];
		if ((formatchar>'0' && formatchar<='9') || formatchar=='*')
			inField = 2;
	}
	
	formatchar = format[*formatIndex];
	if ((formatchar>'0' && formatchar<='9') || formatchar=='*')
		inField = 1;
	
	// Check for cursor right at end of string - don't allow
	
	if (character == ecRight && edit->cp >= strlen(edit->attr->text) && *formatIndex>-1 && inField==0)
	{
		TRACE_EVENT("End of string.");
		return;
	}
	
	if (character!=NULL)														// First add the required character
	{
		edtChar(myHandle, character);											// to the buffer
	}

	// Check for start of fixed input field

	if (inField==1)
	{
		TRACE_EVENT("Entering field.");
		(*formatIndex)++;														// Get us into the field...
		*fieldIndex = 0;														// ...and reset the field index
		formatchar = *(format+*formatIndex);
		if (formatchar=='M')
			upCase = TRUE;
		if (formatchar=='m')
			upCase = FALSE;
		inField = 2;
	}
	
	// Check whether we're in a fixed input field, e.g. "4N" or "8X"

	if (inField==2)															// So we don't look back beyond start of string
	{
		TRACE_EVENT("Move on in field.");
		(*fieldIndex)++;													// Increment the position in the field
		if (*fieldIndex==(int)(formatchar-'0'))								// If we've entered the number of characters specified (note- will never happen for the '*' !)
		{
			TRACE_EVENT("Exiting field.");
			(*formatIndex)++;												// point to NULL at end of string (no more input)
		}
		return;
	}

	// If not, just look at next format character as usual
	
	(*formatIndex)++;															// Point to next character
	
	while (*formatIndex<strlen(format) && *(format+*formatIndex) == '\\')		// Fixed characters encountered
	{
		edtChar(myHandle,ecRight);												// Skip over them
		(*formatIndex)+=2;
	}

	if (*formatIndex>(strlen(format)))											// Don't look beyond end of string
		*formatIndex = strlen(format);
	/***************************Go-lite Optimization changes Start***********************/
	//Aug 16, 2004    REF: CRR 24323   Deepa M.D
	TRACE_EVENT_P2("formatIndex, fieldIndex: %d, %d", *formatIndex, *fieldIndex);
	/***************************Go-lite Optimization changes end***********************/
	return;
}

/*******************************************************************************

 $Function:  editFindPrev 

 $Description:	SH - For formatted input, finds the previous non-fixed character and
 				moves the cursor there if possible

 $Returns:		0 if the cursor position is not changed (nowhere to go)
 				1 if the previous character has been found
 				2 if the cursor was over the first non-fixed character

 $Arguments:	
 
*******************************************************************************/
/*MC SPR 1242 merged in b-sample version of this function */
int editFindPrev()
{
	char	*format		= formatHandle;											// SH - temporary format template
	int		editIndex;
	char	formatchar;
	MfwEdt	*edit = ((MfwHdr *) myHandle)->data;

	TRACE_EVENT("editFindPrev");
	
	if (edit->cp == 0)															// If cursor is at start of string, return 2
	{
		TRACE_EVENT("Exit - start of string found");
		/***************************Go-lite Optimization changes Start***********************/
		//Aug 16, 2004    REF: CRR 24323   Deepa M.D
		TRACE_EVENT_P2("formatIndex, fieldIndex: %d, %d", *formatIndex, *fieldIndex);
		/***************************Go-lite Optimization changes end***********************/
		return 2;
	}
	// First check whether we're in a fixed input field, e.g. "4N" or "8X"
			
	if (*formatIndex>0)															// So we don't look back beyond start of string
	{
		formatchar = *(format+*formatIndex-1);
		if ((formatchar>'0' && formatchar<='9') || formatchar=='*')				// If it's a number between 1 and 9, or a *
		{
			TRACE_EVENT("In delimited field.");
			edtChar(myHandle,ecLeft);
			if (edit->cp < edit->attr->size-1)									// (Don't decrement if at last char in string)
				(*fieldIndex)--;												// Decrement the position in the field
			
			if (*fieldIndex==0)													// If we've reached the beginning of the field
			{
				TRACE_EVENT("Getting out of field.");
				(*formatIndex)--;												// Get out of the field
			}

			
			TRACE_EVENT_P2("formatIndex, fieldIndex: %d, %d", *formatIndex, *fieldIndex);
			
			if (edit->cp==(strlen(edit->attr->text)-1))		// Special case if last character - tell editor to shorten the string
			{
				TRACE_EVENT("Shorten string");
				return 3;
			}
			
			return 1;															// then we're done
		}
	}

	// If not (or if we've just come out of one) just look at next format character as usual

	editIndex	= *formatIndex-1;												// Make copy of format position, starting off to left
	 	
	while (editIndex>0)
	{
		if (*(format+editIndex-1)=='\\')										// If there's a fixed char
			editIndex -=2;														// Look back a further 2 characters
		else																	// If there's a non-fixed character
			break;																// then exit loop
   	}

	if (editIndex==-1)															// Go back from 1st character in editor
	{
		TRACE_EVENT("Exit - skipped over fixed character");
		/***************************Go-lite Optimization changes Start***********************/
		//Aug 16, 2004    REF: CRR 24323   Deepa M.D
		TRACE_EVENT_P2("formatIndex, fieldIndex: %d, %d", *formatIndex, *fieldIndex);
		/***************************Go-lite Optimization changes end***********************/
		return 2;
	}
	
	formatchar = format[editIndex-1];											
	if ((formatchar>'0' && formatchar<='9') || formatchar=='*')
		(*fieldIndex)--;
		
	if (editIndex>-1)															// Provided there is somewhere to go....
		{
		while(*formatIndex>editIndex)
		{
			if (edtChar(myHandle,ecLeft)==MfwResOk)								// move cursor there
				(*formatIndex)--;
			if (format[*formatIndex]=='\\')
				(*formatIndex)--;
		}
		TRACE_EVENT("Found new position.");
		/***************************Go-lite Optimization changes Start***********************/
		//Aug 16, 2004    REF: CRR 24323   Deepa M.D
		TRACE_EVENT_P2("formatIndex, fieldIndex: %d, %d", *formatIndex, *fieldIndex);
		/***************************Go-lite Optimization changes end***********************/
		return 1;																// Found new position
	}
	TRACE_EVENT("Position unchanged.");
	/***************************Go-lite Optimization changes Start***********************/
	//Aug 16, 2004    REF: CRR 24323   Deepa M.D
	TRACE_EVENT_P2("formatIndex, fieldIndex: %d, %d", *formatIndex, *fieldIndex);
	/***************************Go-lite Optimization changes end***********************/
	return 0;																	// Position unchanged
}


/*******************************************************************************

 $Function:  editActivate  

 $Description:	 Activates the edit component

 $Returns:		none.

 $Arguments:	
 
*******************************************************************************/
void editActivate (MfwHnd e, int AlphaMode)
{
  TRACE_FUNCTION("editActivate");

    myHandle = e;
    /*NM p028*/
    if (!editTim)
        editTim = timCreate(0,1000,(MfwCb) editEventTim);
    editAlphaMode = ((AlphaMode != 0) && (AlphaMode != 4) && (AlphaMode != 5));
    editCalcMode  = (AlphaMode == 4);
    editFormatMode = (AlphaMode == 6);
    editHiddenMode = FALSE;
    editAlphaLevel = KEY_PAD_MAX-1;
    editAlphaKey = KCD_MAX;
}


/*******************************************************************************

 $Function:  editHiddenActivate

 $Description:	 SH - Activates the edit component for hidden alphanumeric entry

 $Returns:    none.

 $Arguments:

*******************************************************************************/
void editHiddenActivate (char *buffer)
{
  TRACE_FUNCTION("editHiddenActivate");
    tmpBuf = buffer;
    editHiddenMode = 1;
  return;
}

/*******************************************************************************

 $Function:  editDeactivate

 $Description:	 deactivates the edit component

 $Returns:    none.

 $Arguments:

*******************************************************************************/
void editDeactivate (void)
{
    //myHandle = 0; //SPR#1014 - DS - Commented out.

    if (editTim){
    timStop(editTim);
    timDelete(editTim);
  }
    editTim = 0;
}
/*******************************************************************************

 $Function:  activeEditor

 $Description:	 deactivates the edit component

 $Returns:    none.

 $Arguments:

*******************************************************************************/
MfwHnd activeEditor (void)
{
  return myHandle;
}

/*******************************************************************************

 $Function:	setformatpointers

 $Description:	SH - Sets static variables formatHandle and formatIndex, so thet editEventKey
				can access the format string
 
 $Returns:		

 $Arguments:	Pointer to format string, pointer to format index
				
*******************************************************************************/


void setFormatPointers (char *format, int *index, int *index2)
{

  TRACE_FUNCTION("setFormatPointers");
  formatHandle = format;
  formatIndex = index;
  fieldIndex = index2;
  return;
}

#endif /* NEW_EDITOR */

/*******************************************************************************

 $Function:  MmiModuleSet

 $Description:	 Set the status

 $Returns:    none.

 $Arguments:

*******************************************************************************/
void MmiModuleSet (int module)
{
  switch(module)
  {
  case ModuleIdle:
  MmiModule = MmiModule & ModuleBattLow;
  MmiModule = MmiModule | ModuleIdle;
  break;
  case ModuleInCall:
  MmiModuleDel(ModuleIdle);
  MmiModule=MmiModule | ModuleInCall;
  break;
  case ModuleCall:
    MmiModuleDel(ModuleIdle);
  MmiModule=MmiModule | ModuleCall;
  break;
  case ModuleMenu:
    MmiModuleDel(ModuleIdle);
  MmiModule=MmiModule | ModuleMenu;
  break;
  case ModulePhon:
    MmiModuleDel(ModuleIdle);
  MmiModule=MmiModule | ModulePhon;
  break;
  case ModuleSms:
  MmiModuleDel(ModuleIdle);
  MmiModule=MmiModule | ModuleSms;
  break;
  case ModuleBattLow:
  MmiModule=MmiModule | ModuleBattLow;
  break;
  case ModuleSAT:
    MmiModuleDel(ModuleIdle);
  MmiModule=MmiModule | ModuleSAT;
  break;
  case ModuleAlarm:
    MmiModuleDel(ModuleIdle);
  MmiModule=MmiModule | ModuleAlarm;
  break;
  case ModuleFax:
    MmiModule=MmiModule | ModuleFax;
  break;
  case ModuleDialling:
    MmiModuleDel(ModuleIdle);
  MmiModule=MmiModule | ModuleDialling;
  break;
  default:
  break;
  }

  return;

}

/*******************************************************************************

 $Function:  MmiModuleDel

 $Description:	Delete the status

 $Returns:    none.

 $Arguments:

*******************************************************************************/
void MmiModuleDel (int module)
{
  switch(module)
  {
  case ModuleIdle:

  MmiModule = MmiModule & (~ModuleIdle);
  break;
  case ModuleInCall:
    MmiModule=MmiModule & (~ModuleInCall);
  break;
  case ModuleCall:
    MmiModule=MmiModule & (~ModuleCall);
  break;
  case ModuleMenu:
    MmiModule=MmiModule & (~ModuleMenu);
  break;
  case ModulePhon:
    MmiModule=MmiModule & (~ModulePhon);
  break;
  case ModuleSms:
    MmiModule=MmiModule & (~ModuleSms);
  break;
 case ModuleBattLow:
    MmiModule=MmiModule & (~ModuleBattLow);
  break;
  case ModuleSAT:
    MmiModule=MmiModule & (~ModuleSAT);
  break;
  case ModuleAlarm:
    MmiModule=MmiModule & (~ModuleAlarm);
  break;
  case ModuleFax:
    MmiModule=MmiModule & (~ModuleFax);
  break;
  case ModuleDialling:
  MmiModule=MmiModule & (~ModuleDialling);
  default:
  break;
  }

  return;

}

/*******************************************************************************

 $Function:	showGoodBye

 $Description:	 shows a goodbye Message when swiching off the mobile

 $Returns:    none

 $Arguments:

*******************************************************************************/


static void showGoodBye (T_MFW_HND win)
{
    T_DISPLAY_DATA   display_info;

  TRACE_FUNCTION("showGoodBye ()");
	dlg_zeroDisplayData(&display_info);
	dlg_initDisplayData_events( &display_info, (T_VOID_FUNC)goodbye_cb, FOREVER, 0 );

      /*
       * Call Icon
       */

  mmi_dialogs_insert_animation (info_dialog (win, &display_info), 400 ,(MfwIcnAttr*)&goodbye_Attr,animGoodbye);


}

/*******************************************************************************

 $Function:	goodbye_cb

 $Description:

 $Returns:

 $Arguments:

*******************************************************************************/


static void goodbye_cb (void)
{
  TRACE_FUNCTION("goodbye_cb ()");
  nm_deregistration();	      /* start deregistration procedure   */
}

#ifdef FF_MMI_AUDIO_PROFILE
void mmi_device_status_info(T_MFW_HND parent, int str1, int str2, T_VOID_FUNC callback)
{
	T_DISPLAY_DATA display_info;

	TRACE_FUNCTION("mmi_device_status_info");
	dlg_initDisplayData_TextId( &display_info, TxtNull, TxtNull, str1,str2, COLOUR_STATUS);
	dlg_initDisplayData_events( &display_info, callback, THREE_SECS, KEY_LEFT | KEY_CLEAR | KEY_HUP);
	info_dialog(parent,&display_info);
}
#endif

/* ****************************************************************** */
#ifdef NEPTUNE_BOARD
void AI_Power(SYS_UWORD8 power)
{

}

void SIM_PowerOff (void)
{
  TRACE_FUNCTION ("SIM_PowerOff()");
}

#ifdef MMI_POWER_MANAGEMENT_TEST

/*******************************************************************************

 $Function:    	mmi_PowerManagement_screen_forever

 $Description:	This will be executed when closing Power Management Screen
 
 $Returns:		
 $Arguments:	window, Idetifier, reason
 
*******************************************************************************/

void mmi_PowerManagementStatus(T_MFW_HND win, USHORT identifier, SHORT reason)
{
    timStop( timer_handle );  
    Screen_Update = 1;
}


/*******************************************************************************

 $Function:    	mmi_PowerManagement_screen_forever

 $Description:	Used to display Power Management running Screen
 
 $Returns:		0 - Success 
                1 - Error 


 $Arguments:	window, textId/TestString, color
 
*******************************************************************************/
T_MFW_HND mmi_PowerManagement_screen_forever( MfwHnd win,int TextId, char* TextStr, int colour )
{
	T_DISPLAY_DATA DisplayInfo;
	dlg_initDisplayData_TextId( &DisplayInfo, TxtNull, TxtCancel, TxtNull,  TxtNull, colour);
	dlg_initDisplayData_events( &DisplayInfo,  (T_VOID_FUNC)mmi_PowerManagementStatus, FOREVER, KEY_ALL );
	DisplayInfo.TextString 	= TextStr;
   	return info_dialog(win, &DisplayInfo);
}

/*******************************************************************************

 $Function:    	mmi_PowerManagement

 $Description:	Used to test the power Management
 
 $Returns:		0 - Success 
                1 - Error 


 $Arguments:	menu, menu item
 
*******************************************************************************/
int mmi_PowerManagement(MfwMnu* m, MfwMnuItem* i)
{
    mmi_PowerManagement_screen_forever(0, NULL, "Power Management Running...\n", 1 );
    timStop( timer_handle );   
    dspl_Enable(1);
    Screen_Update = 0;
	return 0;
}

#endif


#endif