FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_app/buzzer/buzzer.h @ 673:62a5285e014a
Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango
Back in 2015 the Mother's idea was to produce a FreeCalypso development
board that would be a clone of TI Leonardo, including the original
quadband RFFE; one major additional stipulation was that this board
needed to be able to run original unmodified TCS211-20070608 firmware
with all blobs intact, with only minimal binary patches to main.lib
and tpudrv.lib. The necessary patched libs were produced at that time
in the tcs211-patches repository.
That plan was changed and we produced FCDEV3B instead, with Openmoko's
triband RFFE instead of Leonardo quadband, but when FC Magnetite started
in 2016, a TPUDRV_blob= provision was still made, allowing the possibility
of patching OM's tpudrv.lib for a restored Leonardo RFFE.
Now in 2020 we have FC Tango which is essentially a verbatim clone of
Leonardo core, including the original quadband RFFE. We have also
deblobbed our firmware so much that we have absolutely no real need
for a blob version of tpudrv.lib - but I thought it would be neat to put
the ancient TPUDRV_blob= mechanism (classic config) to its originally
intended use, just for the heck of it.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 29 May 2020 03:55:36 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/* * BUZZER.H * * Buzzer and light control * * Target : ARM * * Copyright (c) Texas Instruments 1996 * */ #define BZ_LEVEL ARMIO_BUZZER #define LT_LEVEL ARMIO_LIGHT // Bit definitions in CNTL #define BZ_ON 0x01 // start buzzer #define LT_ON 0x02 // start light // Buzzer control void BZ_Init(void); void BZ_Enable(void); void BZ_Disable(void); void BZ_Tone(int f); void BZ_Volume(int v); void BZ_IntHandler(void); void BZ_KeyBeep_ON(void); void BZ_KeyBeep_OFF(void); // LCD and keypad Light control void LT_Enable(void); void LT_Disable(void); void LT_Level(SYS_WORD8 level); SYS_BOOL LT_Status(void);