FreeCalypso > hg > fc-magnetite
view src/cs/layer1/gtt_include/l1gtt_signa.h @ 673:62a5285e014a
Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango
Back in 2015 the Mother's idea was to produce a FreeCalypso development
board that would be a clone of TI Leonardo, including the original
quadband RFFE; one major additional stipulation was that this board
needed to be able to run original unmodified TCS211-20070608 firmware
with all blobs intact, with only minimal binary patches to main.lib
and tpudrv.lib. The necessary patched libs were produced at that time
in the tcs211-patches repository.
That plan was changed and we produced FCDEV3B instead, with Openmoko's
triband RFFE instead of Leonardo quadband, but when FC Magnetite started
in 2016, a TPUDRV_blob= provision was still made, allowing the possibility
of patching OM's tpudrv.lib for a restored Leonardo RFFE.
Now in 2020 we have FC Tango which is essentially a verbatim clone of
Leonardo core, including the original quadband RFFE. We have also
deblobbed our firmware so much that we have absolutely no real need
for a blob version of tpudrv.lib - but I thought it would be neat to put
the ancient TPUDRV_blob= mechanism (classic config) to its originally
intended use, just for the heck of it.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Fri, 29 May 2020 03:55:36 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1GTT_SIGNA.H * * Filename l1gtt_signa.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #if (L1_GTT == 1) #define P_GTT ( 0x19 ) // Messages Upper layer <-> L1A #define MMI_GTT_START_REQ ( ( P_GTT << 8 ) | 1 ) #define MMI_GTT_START_CON ( ( P_GTT << 8 ) | 2 ) #define MMI_GTT_STOP_REQ ( ( P_GTT << 8 ) | 3 ) #define MMI_GTT_STOP_CON ( ( P_GTT << 8 ) | 4 ) // Messages L1S <-> L1A #define L1_GTT_START_CON ( ( P_GTT << 8 ) | 5 ) #define L1_GTT_STOP_CON ( ( P_GTT << 8 ) | 6 ) // Test messages #define TST_CLOSE_GTT_LOOP_REQ ( ( P_GTT << 8 ) | 7 ) #define TST_CLOSE_GTT_LOOP_CON ( ( P_GTT << 8 ) | 8 ) #define TST_OPEN_GTT_LOOP_REQ ( ( P_GTT << 8 ) | 9 ) #define TST_OPEN_GTT_LOOP_CON ( ( P_GTT << 8 ) | 10 ) #define TST_START_GTT_TEST_REQ ( ( P_GTT << 8 ) | 11 ) #define TST_START_GTT_TEST_CON ( ( P_GTT << 8 ) | 12 ) #define TST_STOP_GTT_TEST_REQ ( ( P_GTT << 8 ) | 13 ) #define TST_STOP_GTT_TEST_CON ( ( P_GTT << 8 ) | 14 ) #endif // L1_GTT == 1