FreeCalypso > hg > fc-magnetite
view src/cs/riviera/rvt/rvt_gen.h @ 673:62a5285e014a
Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango
Back in 2015 the Mother's idea was to produce a FreeCalypso development
board that would be a clone of TI Leonardo, including the original
quadband RFFE; one major additional stipulation was that this board
needed to be able to run original unmodified TCS211-20070608 firmware
with all blobs intact, with only minimal binary patches to main.lib
and tpudrv.lib. The necessary patched libs were produced at that time
in the tcs211-patches repository.
That plan was changed and we produced FCDEV3B instead, with Openmoko's
triband RFFE instead of Leonardo quadband, but when FC Magnetite started
in 2016, a TPUDRV_blob= provision was still made, allowing the possibility
of patching OM's tpudrv.lib for a restored Leonardo RFFE.
Now in 2020 we have FC Tango which is essentially a verbatim clone of
Leonardo core, including the original quadband RFFE. We have also
deblobbed our firmware so much that we have absolutely no real need
for a blob version of tpudrv.lib - but I thought it would be neat to put
the ancient TPUDRV_blob= mechanism (classic config) to its originally
intended use, just for the heck of it.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 29 May 2020 03:55:36 +0000 |
parents | 6cea809631d7 |
children |
line wrap: on
line source
/******************************************************************************* * * tr_gen.h * * This file contain general definitions of Trace Module. * Definitions are exportable * * (C) Texas Instruments, all rights reserved * * Version number : 0.1 * * History : 0.1 (7/4/2000) - Created * * Date : 7/4/2000 * * Author : Cristian Livadiotti, c-livadiotti@ti.com * ******************************************************************************/ #ifndef __RVT_GEN_H__ #define __RVT_GEN_H__ #include "rv/general.h" /* ** If TRACE_MODULE is defined, the trace is using the trace task API. ** Otherwise, the trace is using the RVF. NOW OBSOLETE !!!!!!!! */ //#define TRACE_MODULE /* ** If FRAMING_PROTOCOL is defined, the trace mux should be used because of encapsulation and byte stuffing. ** Otherwise, the hyperterminal should be used. */ #define FRAMING_PROTOCOL /* ** If MIXED_TRACE is defined, all traces are mixed on the same UART and the ** trace task handles the RX commands. */ //#define MIXED_TRACE /* ** Type definitions */ /* Define return parameters. */ typedef enum { RVT_OK = 0, RVT_NOT_SUPPORTED = -2, RVT_NOT_READY = -3, RVT_MEMORY_ERR = -4, RVT_INTERNAL_ERR = -9, RVT_INVALID_PARAMETER = -10 } T_RVT_RET; typedef UINT8 T_RVT_USER_ID; typedef UINT32 T_RVT_MSG_LG; typedef enum { RVT_ASCII_FORMAT, // 0 RVT_BINARY_FORMAT // 1 } T_RVT_FORMAT; typedef UINT8 * T_RVT_BUFFER; typedef char T_RVT_NAME; #define RVT_NAME_MAX_LEN (10) #define RVT_RV_HEADER 0x11 #define RVT_L1_HEADER 0x12 #define RVT_L23_HEADER 0x13 #define RVT_TM_HEADER 0x14 #define RVT_RNET_HEADER 0x15 #define RVT_PROF_HEADER 0x16 #define RVT_GTTBACK_HEADER 0x17 #define RVT_OTHER_HEADER 0x18 /* FreeCalypso additions */ #define RVT_AT_HEADER 0x1A #define RVT_EXTUI_HEADER 0x1B #define RVT_TCH_HEADER 0x1C #define RVT_KEEPALIVE_HEADER 0x1D /* end of FreeCalypso additions */ #define RVT_INVALID_HEADER 0xFF typedef void (*RVT_CALLBACK_FUNC)(T_RVT_BUFFER, UINT16); /********* Fonction Prototypes ***********/ void rvt_set_trace_level(T_RVT_BUFFER p_msg, UINT16 msg_length); T_RVT_RET rvt_send_trace_no_cpy(T_RVT_BUFFER p_buffer, T_RVT_USER_ID user_id, T_RVT_MSG_LG msg_lenght, T_RVT_FORMAT msg_format); T_RVT_RET rvt_send_trace_cpy(T_RVT_BUFFER msg, T_RVT_USER_ID user_id, T_RVT_MSG_LG msg_length, T_RVT_FORMAT msg_format); T_RVT_RET rvt_register_id(T_RVT_NAME name[], T_RVT_USER_ID *tr_id, RVT_CALLBACK_FUNC callback); T_RVT_RET rvt_mem_alloc(T_RVT_USER_ID user_id, T_RVT_MSG_LG buffer_lenght, T_RVT_BUFFER * buff); T_RVT_RET rvt_mem_free(T_RVT_BUFFER msg); #endif