FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/psa_t30.h @ 673:62a5285e014a
Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango
Back in 2015 the Mother's idea was to produce a FreeCalypso development
board that would be a clone of TI Leonardo, including the original
quadband RFFE; one major additional stipulation was that this board
needed to be able to run original unmodified TCS211-20070608 firmware
with all blobs intact, with only minimal binary patches to main.lib
and tpudrv.lib. The necessary patched libs were produced at that time
in the tcs211-patches repository.
That plan was changed and we produced FCDEV3B instead, with Openmoko's
triband RFFE instead of Leonardo quadband, but when FC Magnetite started
in 2016, a TPUDRV_blob= provision was still made, allowing the possibility
of patching OM's tpudrv.lib for a restored Leonardo RFFE.
Now in 2020 we have FC Tango which is essentially a verbatim clone of
Leonardo core, including the original quadband RFFE. We have also
deblobbed our firmware so much that we have absolutely no real need
for a blob version of tpudrv.lib - but I thought it would be neat to put
the ancient TPUDRV_blob= mechanism (classic config) to its originally
intended use, just for the heck of it.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 29 May 2020 03:55:36 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : PSA_T30 +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definitions for the protocol stack adapter T30 +----------------------------------------------------------------------------- */ #ifndef PSA_T30_H #define PSA_T30_H #ifdef FF_FAX #define REPORT_MAX 128 #define MSG_SIZE_BITS 2880 /*==== CONSTANTS ==================================================*/ typedef enum { NO_VLD_FS = 0, /* not a valid fax status */ FS_IDL, /* fax idle */ FS_SND_DOC, /* sending fax document */ FS_RCV_DOC, /* receiving fax document */ FS_DOC_TRF /* fax document transfered */ } T_T30_FXST; /*==== TYPES ======================================================*/ typedef struct { UBYTE dir; USHORT l_buf; UBYTE buf[REPORT_MAX]; } T_Report; typedef struct T30ShrdParm { SHORT cId; /* related call id */ UBYTE faxStat; /* status of fax */ USHORT trans_rate; /* t30_activate_req, t30_modify_req */ UBYTE half_rate; /* t30_activate_req, t30_modify_req */ UBYTE threshold; /* t30_activate_req */ UBYTE bitord; /* t30_activate_req */ USHORT frames_per_prim; /* t30_activate_req */ USHORT tbs; /* t30_activate_cnf */ USHORT rbs; /* t30_activate_cnf */ T_hdlc_info hdlc_rcv; /* t30_cap_ind, t30_cap_req */ T_hdlc_info hdlc_snd; /* t30_cap_ind, t30_cap_req */ UBYTE sgn_rcv; /* t30_sgn_ind */ UBYTE sgn_snd; /* t30_sgn_req */ UBYTE cmpl; /* t30_cmpl_ind */ UBYTE hdlc_report; /* t30_config_req */ U16 test_mode; /* t30_config_req */ USHORT err_cause; /* t30_error_ind */ USHORT eol; /* t30_info_ind */ T_Report report; /* t30_report_ind */ UBYTE bcs_phase; /* ks */ UBYTE msg_phase; BOOL T30_is_activated; } T_T30_SHRD_PRM; typedef struct T30TstPrmRef { const char * key; /* keyword string */ UBYTE id; /* corresponding id */ } T30_TSTPRM_REF; /*==== PROTOTYPES =================================================*/ EXTERN SHORT psaT30_Ppm (void); #ifdef DTI EXTERN void psaT30_Dti_Req (T_DTI_CONN_LINK_ID link_id, UBYTE dti_conn); #endif /* DTI */ #ifdef FF_FAX EXTERN void psaT30_Init (void); #endif EXTERN SHORT psaT30_Ppm (void); EXTERN void psaT30_Modify (void); EXTERN void psaT30_Disconnect (void); EXTERN void psaT30_Config (void); EXTERN void psaT30_Capabilities (void); EXTERN void psaT30_Activate (void); EXTERN void psaT30_Deactivate (void); #ifdef TRACING EXTERN void psaT30_shrPrmDump ( void ); #endif /*==== EXPORT =====================================================*/ #ifdef PSA_T30F_C GLOBAL T_T30_SHRD_PRM t30ShrdPrm; #else EXTERN T_T30_SHRD_PRM t30ShrdPrm; #endif /* PSA_T30F_C */ #endif /* FF_FAX */ #endif /* PSA_T30_H */ /*==== EOF =======================================================*/