FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci_ext/aci_ext_pers_cus.h @ 673:62a5285e014a
Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango
Back in 2015 the Mother's idea was to produce a FreeCalypso development
board that would be a clone of TI Leonardo, including the original
quadband RFFE; one major additional stipulation was that this board
needed to be able to run original unmodified TCS211-20070608 firmware
with all blobs intact, with only minimal binary patches to main.lib
and tpudrv.lib. The necessary patched libs were produced at that time
in the tcs211-patches repository.
That plan was changed and we produced FCDEV3B instead, with Openmoko's
triband RFFE instead of Leonardo quadband, but when FC Magnetite started
in 2016, a TPUDRV_blob= provision was still made, allowing the possibility
of patching OM's tpudrv.lib for a restored Leonardo RFFE.
Now in 2020 we have FC Tango which is essentially a verbatim clone of
Leonardo core, including the original quadband RFFE. We have also
deblobbed our firmware so much that we have absolutely no real need
for a blob version of tpudrv.lib - but I thought it would be neat to put
the ancient TPUDRV_blob= mechanism (classic config) to its originally
intended use, just for the heck of it.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 29 May 2020 03:55:36 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : J:\g23m-aci\aci_ext\aci_ext_pers_cus.h +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : +----------------------------------------------------------------------------- */ /* This is the initial setup for the customisation of MMI security. Additional personalisation will be added at a later stage. */ T_ACI_PERS_MMI_DATAS MMI_personalisation_status = { 0x02, // State disabled no pin required 0x00, // Count 0x03, // Max Count 0x05, // Pwd length 0x21,0x43,0xF5, // Current code BCD 0x21,0x43,0xF5 // Original code BCD }; #ifdef SIM_PERS T_SEC_DRV_CATEGORY *personalisation_nw; T_SEC_DRV_CATEGORY *personalisation_ns; T_SEC_DRV_CATEGORY *personalisation_sp; T_SEC_DRV_CATEGORY *personalisation_cp; T_SEC_DRV_CATEGORY *personalisation_sim; T_SEC_DRV_CATEGORY *personalisation_bnw; T_SEC_DRV_CATEGORY *personalisation_first_sim; #endif