FreeCalypso > hg > fc-magnetite
view src/g23m-aci/bat/bat_types.h @ 673:62a5285e014a
Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango
Back in 2015 the Mother's idea was to produce a FreeCalypso development
board that would be a clone of TI Leonardo, including the original
quadband RFFE; one major additional stipulation was that this board
needed to be able to run original unmodified TCS211-20070608 firmware
with all blobs intact, with only minimal binary patches to main.lib
and tpudrv.lib. The necessary patched libs were produced at that time
in the tcs211-patches repository.
That plan was changed and we produced FCDEV3B instead, with Openmoko's
triband RFFE instead of Leonardo quadband, but when FC Magnetite started
in 2016, a TPUDRV_blob= provision was still made, allowing the possibility
of patching OM's tpudrv.lib for a restored Leonardo RFFE.
Now in 2020 we have FC Tango which is essentially a verbatim clone of
Leonardo core, including the original quadband RFFE. We have also
deblobbed our firmware so much that we have absolutely no real need
for a blob version of tpudrv.lib - but I thought it would be neat to put
the ancient TPUDRV_blob= mechanism (classic config) to its originally
intended use, just for the heck of it.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 29 May 2020 03:55:36 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : BAT library +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : types for binary AT commands +----------------------------------------------------------------------------- */ #ifndef BAT_TYPES_H #define BAT_TYPES_H #include "p_bat.h" #include "bat_cfg.h" /********************************************************************************* * * defines * *********************************************************************************/ typedef unsigned char T_BAT_instance; typedef unsigned short T_BAT_client; #define BAT_RCV_BUF_SIZE 800 /* response of %SIMEF comes with 784 bytes ! */ /********************************************************************************* * * enumerations * *********************************************************************************/ typedef enum { BAT_INSTANCE_IDLE = 0, BAT_INSTANCE_ACTIVATING, BAT_INSTANCE_READY, BAT_INSTANCE_BUSY /* the busy state for direction from APP to GDD */ }T_BAT_instance_state; typedef enum { BAT_CLIENT_IDLE = 0, BAT_CLIENT_ACTIVATING, BAT_CLIENT_READY, BAT_CLIENT_BUSY, /* the busy state for direction from APP to GDD */ BAT_CLIENT_SENDING, BAT_CLIENT_SENDING_AND_BUSY /* cmd sending + abort busy */ }T_BAT_client_state; typedef enum { BAT_BUF_EMPTY, BAT_BUF_FILLING, BAT_BUF_FILLED }T_BAT_buf_state; typedef enum { BAT_NEW_INSTANCE_SUCCEED = 0, BAT_NEW_INSTANCE_FAIL, BAT_OPEN_CLIENT_SUCCEED, BAT_OPEN_CLIENT_FAIL, BAT_ABORT_COMMAND_SUCCEED, BAT_ABORT_COMMAND_FAIL, BAT_READY_RESOURCE }T_BAT_signal; typedef struct { T_GDD_BUF *gdd_buf; /* to memorize the address of the sent GDD buffer*/ T_GDD_BUF *gdd_buf_rcv; /* to memorize the address of the received GDD buffer*/ T_BAT_client dest; T_BAT_buf_state buf_st; T_BAT_cmd_response rsp; char data[BAT_RCV_BUF_SIZE]; } T_BAT_buffer; typedef struct { T_BAT_client_state client_state; void (*signal_cb) (T_BAT_client client, T_BAT_signal signal); int (*response_cb) (T_BAT_client client, T_BAT_cmd_response *response); }T_BAT_client_maintain; typedef struct { T_GDD_SEGMENT* desc; U16 length; } T_BAT_l2p_maintain; typedef struct { unsigned long con_handle; T_BAT_instance_state instance_state; unsigned char max_client_num; T_BAT_l2p_maintain l2p_mt; T_BAT_buffer buffer; T_BAT_config *config; int sem_BAT; /* should be T_HANDLE, but we don't want to include "vsi.h" */ void (*instance_signal_cb) (T_BAT_signal signal); int (*unsolicited_result_cb)(T_BAT_client client, T_BAT_cmd_response *response); }T_BAT_instance_maintain; #endif /*BAT_TYPES_H*/