view src/g23m-fad/t30/cnf_t30.h @ 673:62a5285e014a

Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango Back in 2015 the Mother's idea was to produce a FreeCalypso development board that would be a clone of TI Leonardo, including the original quadband RFFE; one major additional stipulation was that this board needed to be able to run original unmodified TCS211-20070608 firmware with all blobs intact, with only minimal binary patches to main.lib and tpudrv.lib. The necessary patched libs were produced at that time in the tcs211-patches repository. That plan was changed and we produced FCDEV3B instead, with Openmoko's triband RFFE instead of Leonardo quadband, but when FC Magnetite started in 2016, a TPUDRV_blob= provision was still made, allowing the possibility of patching OM's tpudrv.lib for a restored Leonardo RFFE. Now in 2020 we have FC Tango which is essentially a verbatim clone of Leonardo core, including the original quadband RFFE. We have also deblobbed our firmware so much that we have absolutely no real need for a blob version of tpudrv.lib - but I thought it would be neat to put the ancient TPUDRV_blob= mechanism (classic config) to its originally intended use, just for the heck of it.
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 29 May 2020 03:55:36 +0000
parents 90eb61ecd093
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  CNF_T30
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Dynamic Configuration for
|             T30
+----------------------------------------------------------------------------- 
*/ 

#ifndef CNF_T30_H
#define CNF_T30_H

/*==== CONSTANTS ==================================================*/
/*
 * CONFIGURATION PARAMETER
 *
 * Description :  The constants define the commands for dynamic
 *                configuration proposals.
 */

#define  T30_TIMER_SET       "TIMER_SET"
#define  T30_TIMER_RESET     "TIMER_RESET"
#define  T30_TIMER_SPEED_UP  "TIMER_SPEED_UP"
#define  T30_TIMER_SLOW_DOWN "TIMER_SLOW_DOWN"
#define  T30_TIMER_SUPPRESS  "TIMER_SUPPRESS"

/*==== TYPES ======================================================*/

/*==== EXPORT =====================================================*/

#endif