FreeCalypso > hg > fc-magnetite
view src/gpf2/tst/drv/stack1_Serial.h @ 673:62a5285e014a
Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango
Back in 2015 the Mother's idea was to produce a FreeCalypso development
board that would be a clone of TI Leonardo, including the original
quadband RFFE; one major additional stipulation was that this board
needed to be able to run original unmodified TCS211-20070608 firmware
with all blobs intact, with only minimal binary patches to main.lib
and tpudrv.lib. The necessary patched libs were produced at that time
in the tcs211-patches repository.
That plan was changed and we produced FCDEV3B instead, with Openmoko's
triband RFFE instead of Leonardo quadband, but when FC Magnetite started
in 2016, a TPUDRV_blob= provision was still made, allowing the possibility
of patching OM's tpudrv.lib for a restored Leonardo RFFE.
Now in 2020 we have FC Tango which is essentially a verbatim clone of
Leonardo core, including the original quadband RFFE. We have also
deblobbed our firmware so much that we have absolutely no real need
for a blob version of tpudrv.lib - but I thought it would be neat to put
the ancient TPUDRV_blob= mechanism (classic config) to its originally
intended use, just for the heck of it.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 29 May 2020 03:55:36 +0000 |
parents | cd37d228dae0 |
children |
line wrap: on
line source
/*============================================================================= * Copyright 1996-2001 Texas Instruments Inc. All rights reserved. */ #ifndef STACK1_SERIAL_HEADER #define STACK1_SERIAL_HEADER //#include "puf_PrimHdr.h" /*============================================================================= * Description: */ //typedef struct{ // Puf_PrimHdr primHdr; //}Stack1_Serial_RxInd; typedef void (*SERIAL_CALLBACK_FUNC)(void); /*=========================================================================== * Description: * Install the Uart interrupt handlers and initialize the Uart. */ int stack1_Serial_PowerUp( SERIAL_CALLBACK_FUNC callback ); /*=========================================================================== * Description: * Copy the data from the Rx buffer into the passed in buffer. If there * aren't dataLen bytes in the Rx buffer all the bytes currently in the rx * buffer are returned. */ unsigned long stack1_Serial_receiveData( unsigned char *dataPtr, unsigned long dataLen ); /*=========================================================================== * Description: * Copy the data to be transmitted into the Tx Buffer and enable the Uart Tx * interrupt. If the Tx buffer is full, discard the data and return a buffer * full indication. */ int stack1_Serial_sendData( unsigned char *dataPtr, unsigned long dataLen ); #endif